Aluminum fence cost in Los Angeles, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $12,800
- Per linear ft
- $28.50 – $84
- before permit
- Versus US midpoint
- +13%
- US $7,600
- Rank of 300 metros
- #15
- 1 = most expensive
If you want to install an aluminum fence in Los Angeles, plan on $4,300 to $12,800 for 150 linear ft, all in. Per linear ft, that is $28.50 to $84 for materials and labor, with the permit on top. The local midpoint runs 13% higher than the national one. Carpenters earn a median of $36.41 an hour in the Los Angeles area, 25% above the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Los Angeles, CA, standard level
$6,850 to $10,200
About $45 to $67.50 per linear ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,100 | $6,300 |
| Labor | $2,700 | $3,800 |
| Permits and fees | $85 | $130 |
| Total | $6,850 | $10,200 |
Cost breakdown for 150 linear ft in Los Angeles, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,400 | $5,200 | $8,000 | 61% |
| Labor | $1,850 | $3,250 | $4,650 | 38% |
| Permits and fees | $45 | $110 | $170 | 1% |
| Total | $4,300 | $8,550 | $12,800 | 100% |
Why Los Angeles prices look the way they do
Labor is 38% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Los Angeles the blended ratio comes out at 1.23.
On the materials line, the BEA goods price index for the Los Angeles metro is 106.6 (US = 100). The midpoint materials bill for 150 linear ft comes to $5,200, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (113.6) and land at $45 to $170.
Los Angeles labor market for aluminum fence
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Los Angeles is 1.23 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $36.41 an hour, which is 25% above the national $29.12. The middle half of them earn between $28.59 and $48.37 an hour. BLS counts 30,600 of them working in the area, 48.8 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 40% of the weighting: a median of $28.28 an hour, 25% above the US median of $22.66. The middle half of them earn between $22.75 and $37.31 an hour. About 21,730 work in the metro. That is 34.6 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For sheet metal workers (47-2211, weighted 20%) the local median is $34.96 an hour, which is 18% above the national $29.71. The middle half of them earn between $26.43 and $50.45 an hour. BLS counts 2,440 of them working in the area, 3.9 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($48.37 an hour) instead of the median, the labor line grows by about $430. At the 25th percentile ($28.59) it shrinks by about $280. The total moves by 5.0% or 3.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 6,271,560 jobs in the Los Angeles-Long Beach-Anaheim area. That makes it the 2nd largest of the 300 metros we cover, with 4.03% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $28.59 | $36.41 | $48.37 | $29.12 | 1.25 | metro |
| Construction laborers (47-2061) | 40% | $22.75 | $28.28 | $37.31 | $22.66 | 1.25 | metro |
| Sheet metal workers (47-2211) | 20% | $26.43 | $34.96 | $50.45 | $29.71 | 1.18 | metro |
| Blended | 100% | 1.23 | |||||
Climate in Los Angeles: timing your aluminum fence job
We use NOAA's 1991-2020 climate normals for Culver City (in the city). These are 30-year monthly averages, not forecasts.
Weather is not a serious constraint for exterior installation in Los Angeles: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Los Angeles gets about 14 inches of precipitation in a normal year. The wettest months are January, February and December (3.5 inches in February). The station averages about 7 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 67 | 48 | 3.3 | Workable |
| Feb | 67 | 49 | 3.5 | Workable |
| Mar | 68 | 51 | 2.2 | Workable |
| Apr | 71 | 53 | 0.6 | Workable |
| May | 72 | 57 | 0.4 | Workable |
| Jun | 75 | 60 | 0.1 | Workable |
| Jul | 78 | 63 | 0.0 | Workable |
| Aug | 79 | 64 | 0.0 | Workable |
| Sep | 78 | 62 | 0.1 | Workable |
| Oct | 76 | 58 | 0.6 | Workable |
| Nov | 71 | 52 | 0.9 | Workable |
| Dec | 66 | 47 | 2.5 | Workable |
Optional extras in Los Angeles
Extras are quoted nationally and then scaled to Los Angeles by the average of the local wage index (1.23) and goods index (1.07), a factor of 1.15. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $230 – $1,050 |
Cost by quality level and size in Los Angeles
Three bands are cut from the same cited range and localized for Los Angeles wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$4,300 to $7,700
Standard picket or ornamental, 4 ft
Standard
$6,850 to $10,200
Ornamental pool-code fence, 4-5 ft
Premium
$9,400 to $12,800
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,900 – $5,150 | $4,600 – $6,900 | $6,300 – $8,600 |
| 150 ft (150 linear ft) | $4,300 – $7,700 | $6,850 – $10,200 | $9,400 – $12,800 |
| 200 ft (200 linear ft) | $5,700 – $10,200 | $9,100 – $13,600 | $12,500 – $17,000 |
Los Angeles against nearby metros and the rest of California
Same job, same size (150 linear ft), priced for the nearest metros. San Diego is the priciest of the group at $8,600. Riverside is the cheapest at $8,200.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Los Angeles, CAthis page | $4,300 – $12,800 | $8,550 | |
| Oxnard, CA55 miles | $4,200 – $12,500 | $8,350 | −2% |
| Bakersfield, CA90 miles | $4,150 – $12,400 | $8,250 | −3% |
| Santa Maria, CA110 miles | $4,200 – $12,600 | $8,400 | −2% |
| San Diego, CA110 miles | $4,300 – $12,900 | $8,600 | +1% |
| Riverside, CA120 miles | $4,100 – $12,300 | $8,200 | −4% |
| California (statewide) | $4,300 – $12,900 | $8,600 | level |
| United States | $3,800 – $11,400 | $7,600 | −11% |
Across 300 US metros, Los Angeles comes in at #15 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Los Angeles is 0% below the California figure.
Other California metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| San Francisco, CA | 2,373,920 jobs | $4,800 – $14,100 | $9,450 | +10% |
| Riverside, CA | 1,716,760 jobs | $4,100 – $12,300 | $8,200 | −4% |
| San Diego, CA | 1,538,060 jobs | $4,300 – $12,900 | $8,600 | +1% |
| San Jose, CA | 1,134,970 jobs | $4,600 – $13,500 | $9,100 | +6% |
| Sacramento, CA | 1,080,590 jobs | $4,300 – $12,700 | $8,500 | −1% |
| Fresno, CA | 476,890 jobs | $4,100 – $12,300 | $8,200 | −4% |
Cities with a workforce like Los Angeles's
Big cities and small ones price differently, so here is Los Angeles against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New York, NY | 9,492,000 jobs | $4,400 – $13,200 | $8,800 | +3% |
| Chicago, IL | 4,513,280 jobs | $4,500 – $13,300 | $8,900 | +4% |
| Dallas, TX | 4,049,800 jobs | $3,650 – $11,200 | $7,400 | −13% |
| Houston, TX | 3,289,720 jobs | $3,550 – $10,900 | $7,200 | −15% |
Aluminum fence: what moves the price in Los Angeles
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Planning more than one job in Los Angeles?
Because every project leans on different trades, Los Angeles's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs +18% and vinyl fence +11%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $5,000 – $10,200 | +11% |
| Wood fence | 150 linear ft | $3,500 – $8,700 | +14% |
| Chain-link fence | 150 linear ft | $1,750 – $7,300 | +18% |
| Inground pool | 450 sq ft | $42,500 – $133,000 | +18% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,850 to $10,200 for Los Angeles, CA is attached.
Detailed aluminum fence report for Los Angeles, CA, $9
Multi-page report for Los Angeles, CA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Los Angeles: your questions
+How much does it cost to install an aluminum fence in Los Angeles?
For 150 linear ft, expect $4,300 to $12,800 in the Los Angeles area. A standard-spec job lands at $6,850 to $10,200. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Los Angeles?
About $28.50 to $84 per linear ft for materials and labor, plus $45 to $170 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Los Angeles or Oxnard?
Oxnard is 55 miles away. The midpoint for 150 linear ft there is $8,350, which is 2% less than Los Angeles ($8,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Los Angeles?
About 38% at the midpoint, or $3,250 out of $8,550. Materials are 61% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Los Angeles?
$4,300 to $12,800. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Los Angeles?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $170 for fees in the Los Angeles area (our national range of $40 to $150 scaled by the local price level).
+Is Los Angeles expensive for aluminum fence compared with the rest of California?
Los Angeles is 0% below the California statewide estimate ($8,600 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do carpenters earn in Los Angeles?
The BLS median is $36.41 an hour in the Los Angeles area, compared with $29.12 nationally. The 25th to 75th percentile range is $28.59 to $48.37.
+What do basic and premium aluminum fence work cost in Los Angeles?
For 150 linear ft, basic work runs $4,300 to $7,700 and premium work $9,400 to $12,800. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+Is there a bad season to install an aluminum fence in Los Angeles?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add one gate" add in Los Angeles?
$230 to $1,050, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Los Angeles
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.