Chain-link fence cost in Los Angeles, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,750 – $7,300
- Per linear ft
- $11.50 – $47.50
- before permit
- Versus US midpoint
- +18%
- US $3,850
- Rank of 300 metros
- #16
- 1 = most expensive
Los Angeles homeowners pay roughly $1,750 to $7,300 to install a chain-link fence at 150 linear ft, or $11.50 to $47.50 per linear ft (permit not included). Against the US midpoint, Los Angeles is 18% higher. Construction laborers earn a median of $28.28 an hour in the Los Angeles area, 25% above the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Los Angeles, CA, standard level
$3,400 to $5,650
About $22 to $36.50 per linear ft before permits. Labor is about 64% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,300 | $1,750 |
| Labor | $2,050 | $3,750 |
| Permits and fees | $85 | $130 |
| Total | $3,400 | $5,650 |
Cost breakdown for 150 linear ft in Los Angeles, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $960 | $1,500 | $2,100 | 34% |
| Labor | $750 | $2,900 | $5,050 | 64% |
| Permits and fees | $45 | $110 | $170 | 2% |
| Total | $1,750 | $4,550 | $7,300 | 100% |
What is behind the Los Angeles number
Labor is 64% of the midpoint bill here, against 60% nationally. The mix of trades behind this job is construction laborers (60%), carpenters (40%). We weight each trade's local median wage by that share and compare it with the national median. In Los Angeles the blended ratio comes out at 1.25.
On the materials line, the BEA goods price index for the Los Angeles metro is 106.6 (US = 100). The midpoint materials bill for 150 linear ft comes to $1,500, compared with $1,450 at national prices. Permit and inspection fees are scaled by the broader index (113.6) and land at $45 to $170.
When to schedule chain-link fence in Los Angeles
We use NOAA's 1991-2020 climate normals for Culver City (in the city). These are 30-year monthly averages, not forecasts.
Weather is not a serious constraint for exterior installation in Los Angeles: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Los Angeles gets about 14 inches of precipitation in a normal year. The wettest months are January, February and December (3.5 inches in February). The station averages about 7 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 67 | 48 | 3.3 | Workable |
| Feb | 67 | 49 | 3.5 | Workable |
| Mar | 68 | 51 | 2.2 | Workable |
| Apr | 71 | 53 | 0.6 | Workable |
| May | 72 | 57 | 0.4 | Workable |
| Jun | 75 | 60 | 0.1 | Workable |
| Jul | 78 | 63 | 0.0 | Workable |
| Aug | 79 | 64 | 0.0 | Workable |
| Sep | 78 | 62 | 0.1 | Workable |
| Oct | 76 | 58 | 0.6 | Workable |
| Nov | 71 | 52 | 0.9 | Workable |
| Dec | 66 | 47 | 2.5 | Workable |
Specs and site conditions that change a Los Angeles bid
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
Height
A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).
What nearby projects cost in Los Angeles
Because every project leans on different trades, Los Angeles's wage level does not move all prices equally. Against the US midpoint, gravel driveway runs +23% and vinyl fence +11%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,500 – $8,700 | +14% |
| Vinyl fence | 150 linear ft | $5,000 – $10,200 | +11% |
| Aluminum fence | 150 linear ft | $4,300 – $12,800 | +13% |
| Gravel driveway | 1,000 sq ft | $3,100 – $12,600 | +23% |
Cost by quality level and size in Los Angeles
Three bands are cut from the same cited range and localized for Los Angeles wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$1,750 to $4,000
4-ft galvanized, front yard
Standard
$3,400 to $5,650
6-ft galvanized backyard fence
Premium
$5,100 to $7,300
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $1,200 – $2,700 | $2,300 – $3,800 | $3,450 – $4,950 |
| 150 ft (150 linear ft) | $1,750 – $4,000 | $3,400 – $5,650 | $5,100 – $7,300 |
| 200 ft (200 linear ft) | $2,300 – $5,250 | $4,550 – $7,500 | $6,750 – $9,700 |
| full lot (300 linear ft) | $3,450 – $7,850 | $6,750 – $11,200 | $10,100 – $14,400 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Los Angeles is 1.25 times the national level.
Construction laborers (47-2061), 60% of the weighting: a median of $28.28 an hour, 25% above the US median of $22.66. The middle half of them earn between $22.75 and $37.31 an hour. About 21,730 work in the metro. That is 34.6 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For carpenters (47-2031, weighted 40%) the local median is $36.41 an hour, which is 25% above the national $29.12. The middle half of them earn between $28.59 and $48.37 an hour. BLS counts 30,600 of them working in the area, 48.8 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($37.31 an hour) instead of the median, the labor line grows by about $560. At the 25th percentile ($22.75) it shrinks by about $340. The total moves by 12.3% or 7.5%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 6,271,560 jobs in the Los Angeles-Long Beach-Anaheim area. That makes it the 2nd largest of the 300 metros we cover, with 4.03% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $22.75 | $28.28 | $37.31 | $22.66 | 1.25 | metro |
| Carpenters (47-2031) | 40% | $28.59 | $36.41 | $48.37 | $29.12 | 1.25 | metro |
| Blended | 100% | 1.25 | |||||
Extras that change the Los Angeles total
Extras are quoted nationally and then scaled to Los Angeles by the average of the local wage index (1.25) and goods index (1.07), a factor of 1.16. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $95 – $1,150 |
Is Los Angeles cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $4,250 to $4,550 across Los Angeles and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Los Angeles, CAthis page | $1,750 – $7,300 | $4,550 | |
| Oxnard, CA55 miles | $1,750 – $7,250 | $4,500 | −1% |
| Bakersfield, CA90 miles | $1,700 – $6,850 | $4,250 | −6% |
| Santa Maria, CA110 miles | $1,700 – $7,100 | $4,400 | −3% |
| San Diego, CA110 miles | $1,750 – $7,200 | $4,450 | −2% |
| Riverside, CA120 miles | $1,700 – $7,100 | $4,400 | −3% |
| California (statewide) | $1,750 – $7,350 | $4,550 | +1% |
| United States | $1,550 – $6,150 | $3,850 | −15% |
Across 300 US metros, Los Angeles comes in at #16 from the top. The priciest is Honolulu, HI at $5,450; the cheapest is Brownsville, TX at $3,000 (midpoints, 150 linear ft). Statewide, Los Angeles is 1% below the California figure.
Other California metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| San Francisco, CA | 2,373,920 jobs | $1,950 – $8,400 | $5,150 | +14% |
| Riverside, CA | 1,716,760 jobs | $1,700 – $7,100 | $4,400 | −3% |
| San Diego, CA | 1,538,060 jobs | $1,750 – $7,200 | $4,450 | −2% |
| San Jose, CA | 1,134,970 jobs | $1,850 – $7,900 | $4,850 | +7% |
| Sacramento, CA | 1,080,590 jobs | $1,750 – $7,300 | $4,550 | level |
| Fresno, CA | 476,890 jobs | $1,650 – $6,750 | $4,200 | −7% |
Cities with a workforce like Los Angeles's
Big cities and small ones price differently, so here is Los Angeles against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New York, NY | 9,492,000 jobs | $1,800 – $7,450 | $4,650 | +2% |
| Chicago, IL | 4,513,280 jobs | $1,800 – $7,550 | $4,650 | +3% |
| Dallas, TX | 4,049,800 jobs | $1,500 – $5,750 | $3,600 | −20% |
| Houston, TX | 3,289,720 jobs | $1,450 – $5,550 | $3,500 | −22% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,400 to $5,650 for Los Angeles, CA is attached.
Detailed chain-link fence report for Los Angeles, CA, $9
Multi-page report for Los Angeles, CA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Los Angeles: your questions
+How much does it cost to install a chain-link fence in Los Angeles?
For 150 linear ft, expect $1,750 to $7,300 in the Los Angeles area. A standard-spec job lands at $3,400 to $5,650. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Los Angeles?
About $11.50 to $47.50 per linear ft for materials and labor, plus $45 to $170 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Los Angeles or Oxnard?
Oxnard is 55 miles away. The midpoint for 150 linear ft there is $4,500, which is 1% less than Los Angeles ($4,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Los Angeles?
About 64% at the midpoint, or $2,900 out of $4,550. Materials are 34% and permits 2%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Los Angeles?
$2,300 to $9,700. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Los Angeles?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $170 for fees in the Los Angeles area (our national range of $40 to $150 scaled by the local price level).
+Is Los Angeles expensive for chain-link fence compared with the rest of California?
Los Angeles is 1% below the California statewide estimate ($4,550 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do construction laborers earn in Los Angeles?
The BLS median is $28.28 an hour in the Los Angeles area, compared with $22.66 nationally. The 25th to 75th percentile range is $22.75 to $37.31.
+What do basic and premium chain-link fence work cost in Los Angeles?
For 150 linear ft, basic work runs $1,750 to $4,000 and premium work $5,100 to $7,300. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+Is there a bad season to install a chain-link fence in Los Angeles?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add one gate" add in Los Angeles?
$95 to $1,150, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Los Angeles
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).