Aluminum fence cost in Laredo, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,250 – $9,900
- Per linear ft
- $21.50 – $65.50
- before permit
- Versus US midpoint
- −13%
- US $7,600
- Rank of 300 metros
- #297
- 1 = most expensive
Local price for an aluminum fence in the Laredo area: $3,250 to $9,900 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 13% lower than the US figure. Carpenters earn a median of $19.97 an hour in the Laredo area, 31% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Laredo, TX, standard level
$5,250 to $7,900
About $34.50 to $52 per linear ft before permits. Labor is about 29% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,600 | $5,550 |
| Labor | $1,600 | $2,250 |
| Permits and fees | $65 | $100 |
| Total | $5,250 | $7,900 |
Cost breakdown for 150 linear ft in Laredo, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,100 | $4,550 | $7,050 | 69% |
| Labor | $1,100 | $1,950 | $2,750 | 29% |
| Permits and fees | $35 | $85 | $130 | 1% |
| Total | $3,250 | $6,600 | $9,900 | 100% |
Where the Laredo price comes from
The wage side of the estimate leans on carpenters, who do 40% of the hours on a typical job. Their local median is $19.97 an hour. Add the other trades involved and the blended wage index for Laredo is 0.74 (US = 1.00), which puts labor at 29% of the total.
Materials are scaled with BEA's regional price parity for goods. Laredo is at 93.8 against 100 for the US, so a materials line of $4,900 nationally becomes $4,550 here (midpoint, 150 linear ft). Permits follow the all-items index of 87.0: $35 to $130.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Laredo. The wage table below marks each row.
The best months for aluminum fence in Laredo
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Laredo 2 (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Laredo are October through April: 7 of 12. Outside them, May, June, July, August and September have an average daytime high of 90°F or more.
Laredo gets about 20 inches of precipitation in a normal year. The wettest months are May, July and September (3.9 inches in September). Inside the workable window, January and February are the driest, at 0.8 and 0.7 inches. The station averages about 178 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 68 | 47 | 0.8 | Workable |
| Feb | 74 | 52 | 0.7 | Workable |
| Mar | 81 | 58 | 1.3 | Workable |
| Apr | 88 | 65 | 1.3 | Workable |
| May | 94 | 72 | 2.8 | Hot |
| Jun | 99 | 76 | 1.8 | Hot |
| Jul | 100 | 77 | 1.9 | Hot |
| Aug | 101 | 77 | 1.6 | Hot |
| Sep | 94 | 73 | 3.9 | Hot |
| Oct | 87 | 66 | 1.7 | Workable |
| Nov | 77 | 56 | 1.0 | Workable |
| Dec | 69 | 48 | 1.1 | Workable |
Who does the work: Laredo trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Laredo the blend is 0.74.
Carpenters (47-2031), 40% of the weighting: a median of $19.97 an hour, 31% below the US median of $29.12. The middle half of them earn between $16.93 and $24.22 an hour. About 100 work in the metro. That is 9.1 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $16.22 an hour, which is 28% below the national $22.66. The middle half of them earn between $13.98 and $17.72 an hour. BLS counts 400 of them working in the area, 36.6 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Sheet metal workers (47-2211) carry 20% of the labor weighting. BLS does not publish this trade for the Laredo metro, so we used the Texas statewide median: $26.08 an hour against $29.71 for the US. The middle half of them earn between $21.61 and $30.51 an hour.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $150 to the midpoint estimate; the 25th percentile takes off about $110. That is a swing of roughly 1.7% to 2.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Laredo has 109,370 jobs in total (BLS, May 2025), ranking 191st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $16.93 | $19.97 | $24.22 | $29.12 | 0.69 | metro |
| Construction laborers (47-2061) | 40% | $13.98 | $16.22 | $17.72 | $22.66 | 0.72 | metro |
| Sheet metal workers (47-2211) | 20% | $21.61 | $26.08 | $30.51 | $29.71 | 0.88 | state |
| Blended | 100% | 0.74 | |||||
Related projects, priced for Laredo
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Laredo wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−12%) and chain-link fence lowest (−21%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,100 – $8,050 | −12% |
| Wood fence | 150 linear ft | $2,500 – $6,450 | −16% |
| Chain-link fence | 150 linear ft | $1,300 – $4,800 | −21% |
| Inground pool | 450 sq ft | $30,700 – $96,000 | −15% |
Cost by quality level and size in Laredo
The cited range is split into basic, standard and premium bands, then scaled to Laredo. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$3,250 to $5,900
Standard picket or ornamental, 4 ft
Standard
$5,250 to $7,900
Ornamental pool-code fence, 4-5 ft
Premium
$7,250 to $9,900
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,200 – $3,950 | $3,500 – $5,300 | $4,850 – $6,650 |
| 150 ft (150 linear ft) | $3,250 – $5,900 | $5,250 – $7,900 | $7,250 – $9,900 |
| 200 ft (200 linear ft) | $4,300 – $7,850 | $7,000 – $10,500 | $9,650 – $13,200 |
How Laredo compares
Of the five closest metros, 2 are cheaper than Laredo. Brownsville is the lowest at about $6,500 (midpoint, 150 linear ft), 160 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Laredo, TXthis page | $3,250 – $9,900 | $6,600 | |
| McAllen, TX120 miles | $3,200 – $9,850 | $6,550 | −1% |
| Corpus Christi, TX120 miles | $3,450 – $10,400 | $6,900 | +5% |
| San Antonio, TX125 miles | $3,400 – $10,300 | $6,850 | +4% |
| Brownsville, TX160 miles | $3,200 – $9,800 | $6,500 | −1% |
| Austin, TX200 miles | $3,500 – $10,600 | $7,050 | +7% |
| Texas (statewide) | $3,500 – $10,700 | $7,100 | +8% |
| United States | $3,800 – $11,400 | $7,600 | +15% |
Out of the 300 metros we cover, Laredo ranks #297 for the cost of this job (#1 is the most expensive). Statewide, Laredo is 7% below the Texas figure.
Elsewhere in Texas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $3,650 – $11,200 | $7,400 | +13% |
| Houston, TX | 3,289,720 jobs | $3,550 – $10,900 | $7,200 | +10% |
| Austin, TX | 1,293,690 jobs | $3,500 – $10,600 | $7,050 | +7% |
| San Antonio, TX | 1,126,880 jobs | $3,400 – $10,300 | $6,850 | +4% |
| El Paso, TX | 339,120 jobs | $3,250 – $9,950 | $6,600 | level |
| McAllen, TX | 296,700 jobs | $3,200 – $9,850 | $6,550 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Laredo against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlottesville, VA | 114,780 jobs | $3,550 – $10,800 | $7,200 | +9% |
| Tuscaloosa, AL | 108,460 jobs | $3,400 – $10,300 | $6,850 | +4% |
| Tyler, TX | 115,220 jobs | $3,300 – $10,100 | $6,700 | +1% |
| Bend, OR | 108,240 jobs | $4,000 – $12,000 | $8,000 | +22% |
Specs and site conditions that change a Laredo bid
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Extras that change the Laredo total
Add-ons start from national price ranges and are scaled by 0.84 for Laredo, which is the average of the area's wage index (0.74) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $170 – $750 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,250 to $7,900 for Laredo, TX is attached.
Detailed aluminum fence report for Laredo, TX, $9
The report lays out the aluminum fence numbers for Laredo, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Laredo: your questions
+How much does it cost to install an aluminum fence in Laredo?
For 150 linear ft, expect $3,250 to $9,900 in the Laredo area. A standard-spec job lands at $5,250 to $7,900. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Laredo?
About $21.50 to $65.50 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Laredo or McAllen?
McAllen is 120 miles away. The midpoint for 150 linear ft there is $6,550, which is 1% less than Laredo ($6,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Laredo?
About 29% at the midpoint, or $1,950 out of $6,600. Materials are 69% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Laredo?
$3,250 to $9,900. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Laredo?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the Laredo area (our national range of $40 to $150 scaled by the local price level).
+Is Laredo expensive for aluminum fence compared with the rest of Texas?
Laredo is 7% below the Texas statewide estimate ($7,100 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do carpenters earn in Laredo?
The BLS median is $19.97 an hour in the Laredo area, compared with $29.12 nationally. The 25th to 75th percentile range is $16.93 to $24.22.
+What do basic and premium aluminum fence work cost in Laredo?
For 150 linear ft, basic work runs $3,250 to $5,900 and premium work $7,250 to $9,900. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Laredo?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through April. January and February are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Laredo?
$170 to $750, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Laredo
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.