Aluminum fence cost in Deltona, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,450 – $10,500
- Per linear ft
- $23 – $69
- before permit
- Versus US midpoint
- −8%
- US $7,600
- Rank of 300 metros
- #241
- 1 = most expensive
Local price for an aluminum fence in the Deltona area: $3,450 to $10,500 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 8% lower than the US figure. Carpenters earn a median of $22.44 an hour in the Deltona area, 23% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Deltona, FL, standard level
$5,550 to $8,400
About $36.50 to $55 per linear ft before permits. Labor is about 31% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $1,800 | $2,550 |
| Permits and fees | $75 | $120 |
| Total | $5,550 | $8,400 |
Cost breakdown for 150 linear ft in Deltona, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,200 | 67% |
| Labor | $1,250 | $2,200 | $3,100 | 31% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $3,450 | $6,950 | $10,500 | 100% |
Why Deltona prices look the way they do
We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Deltona wages are 0.83 times the national level. Labor makes up about 31% of the midpoint estimate (35% at national prices).
Materials are scaled with BEA's regional price parity for goods. Deltona is at 96.2 against 100 for the US, so a materials line of $4,900 nationally becomes $4,700 here (midpoint, 150 linear ft). Permits follow the all-items index of 99.4: $40 to $150.
Who does the work: Deltona trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Deltona the blend is 0.83.
Carpenters (47-2031), 40% of the weighting: a median of $22.44 an hour, 23% below the US median of $29.12. The middle half of them earn between $17.85 and $27.17 an hour. About 740 work in the metro. That is 33.7 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $21.02 an hour, which is 7% below the national $22.66. The middle half of them earn between $17.70 and $23.37 an hour. BLS counts 2,050 of them working in the area, 93.3 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Sheet metal workers (47-2211), 20% of the weighting: a median of $22.60 an hour, 24% below the US median of $29.71. The middle half of them earn between $21.20 and $24.87 an hour. About 170 work in the metro. That is 7.7 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $170 to the midpoint estimate; the 25th percentile takes off about $170. That is a swing of roughly 2.4% to 2.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Deltona-Daytona Beach-Ormond Beach has 219,740 jobs in total (BLS, May 2025), ranking 109th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $17.85 | $22.44 | $27.17 | $29.12 | 0.77 | metro |
| Construction laborers (47-2061) | 40% | $17.70 | $21.02 | $23.37 | $22.66 | 0.93 | metro |
| Sheet metal workers (47-2211) | 20% | $21.20 | $22.60 | $24.87 | $29.71 | 0.76 | metro |
| Blended | 100% | 0.83 | |||||
Is Deltona cheap or dear? The local comparison
Of the five closest metros, 2 are cheaper than Deltona. Ocala is the lowest at about $6,850 (midpoint, 150 linear ft), 50 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Deltona, FLthis page | $3,450 – $10,500 | $6,950 | |
| Ocala, FL50 miles | $3,400 – $10,300 | $6,850 | −2% |
| Orlando, FL50 miles | $3,450 – $10,500 | $7,000 | level |
| Palm Bay, FL70 miles | $3,500 – $10,600 | $7,050 | +1% |
| Jacksonville, FL80 miles | $3,500 – $10,600 | $7,050 | +1% |
| Lakeland, FL90 miles | $3,400 – $10,300 | $6,850 | −1% |
| Florida (statewide) | $3,550 – $10,700 | $7,150 | +3% |
| United States | $3,800 – $11,400 | $7,600 | +9% |
Out of the 300 metros we cover, Deltona ranks #241 for the cost of this job (#1 is the most expensive). Statewide, Deltona is 2% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $3,700 – $11,300 | $7,500 | +8% |
| Tampa, FL | 1,447,120 jobs | $3,500 – $10,600 | $7,050 | +1% |
| Orlando, FL | 1,411,730 jobs | $3,450 – $10,500 | $7,000 | level |
| Jacksonville, FL | 765,930 jobs | $3,500 – $10,600 | $7,050 | +1% |
| North Port, FL | 339,940 jobs | $3,550 – $10,700 | $7,100 | +2% |
| Cape Coral, FL | 304,790 jobs | $3,500 – $10,600 | $7,050 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Deltona against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Springfield, MO | 223,030 jobs | $3,500 – $10,600 | $7,050 | +1% |
| Ann Arbor, MI | 219,730 jobs | $3,800 – $11,300 | $7,550 | +9% |
| Fort Wayne, IN | 225,520 jobs | $3,650 – $11,000 | $7,300 | +5% |
| Lansing, MI | 217,180 jobs | $3,850 – $11,500 | $7,650 | +10% |
What nearby projects cost in Deltona
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Deltona wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−6%) and chain-link fence lowest (−10%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,550 | −6% |
| Wood fence | 150 linear ft | $2,750 – $7,000 | −9% |
| Chain-link fence | 150 linear ft | $1,400 – $5,550 | −10% |
| Inground pool | 450 sq ft | $32,700 – $102,500 | −9% |
Pick a size, pick a tier: aluminum fence pricing in Deltona
The cited range is split into basic, standard and premium bands, then scaled to Deltona. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$3,450 to $6,250
Standard picket or ornamental, 4 ft
Standard
$5,550 to $8,400
Ornamental pool-code fence, 4-5 ft
Premium
$7,650 to $10,500
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,300 – $4,200 | $3,750 – $5,600 | $5,150 – $7,050 |
| 150 ft (150 linear ft) | $3,450 – $6,250 | $5,550 – $8,400 | $7,650 – $10,500 |
| 200 ft (200 linear ft) | $4,600 – $8,350 | $7,400 – $11,100 | $10,200 – $13,900 |
Extras that change the Deltona total
Add-ons start from national price ranges and are scaled by 0.90 for Deltona, which is the average of the area's wage index (0.83) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $180 – $810 |
The best months for aluminum fence in Deltona
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Orlando Sanford Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Deltona are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Deltona gets about 50 inches of precipitation in a normal year. The wettest months are June, July and August (8.2 inches in June). Inside the workable window, November and December are the driest, at 1.9 and 2.2 inches. The station averages about 115 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 71 | 50 | 2.4 | Workable |
| Feb | 74 | 52 | 2.3 | Workable |
| Mar | 78 | 56 | 2.9 | Workable |
| Apr | 83 | 61 | 2.4 | Workable |
| May | 89 | 67 | 3.3 | Workable |
| Jun | 91 | 73 | 8.2 | Hot |
| Jul | 93 | 74 | 7.3 | Hot |
| Aug | 93 | 75 | 6.8 | Hot |
| Sep | 90 | 73 | 6.2 | Hot |
| Oct | 85 | 67 | 3.9 | Workable |
| Nov | 78 | 58 | 1.9 | Workable |
| Dec | 73 | 53 | 2.2 | Workable |
Aluminum fence: what moves the price in Deltona
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,550 to $8,400 for Deltona, FL is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Deltona, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Deltona: your questions
+How much does it cost to install an aluminum fence in Deltona?
For 150 linear ft, expect $3,450 to $10,500 in the Deltona area. A standard-spec job lands at $5,550 to $8,400. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Deltona?
About $23 to $69 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Deltona or Ocala?
Ocala is 50 miles away. The midpoint for 150 linear ft there is $6,850, which is 2% less than Deltona ($6,950). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Deltona?
About 31% at the midpoint, or $2,200 out of $6,950. Materials are 67% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Deltona?
$3,450 to $10,500. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Deltona?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Deltona area (our national range of $40 to $150 scaled by the local price level).
+Is Deltona expensive for aluminum fence compared with the rest of Florida?
Deltona is 2% below the Florida statewide estimate ($7,150 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Deltona?
The BLS median is $22.44 an hour in the Deltona area, compared with $29.12 nationally. The 25th to 75th percentile range is $17.85 to $27.17.
+What do basic and premium aluminum fence work cost in Deltona?
For 150 linear ft, basic work runs $3,450 to $6,250 and premium work $7,650 to $10,500. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Deltona?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. November and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Deltona?
$180 to $810, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Deltona
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.