Skip to content
CostLocal

Wood fence cost in Cleveland, OH

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (150 linear ft)
$3,050 – $7,600
Per linear ft
$20 – $50
before permit
Versus US midpoint
Level
US $5,350
Rank of 300 metros
#103
1 = most expensive

Cleveland homeowners pay roughly $3,050 to $7,600 to install a wood fence at 150 linear ft, or $20 to $50 per linear ft (permit not included). Against the US midpoint, Cleveland is almost level. Carpenters earn a median of $29.16 an hour in the Cleveland area, 0% above the US median of $29.12.

Estimate your wood fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

6-ft cedar or treated privacy fence

Add-ons

Estimated cost for 150 linear ft in Cleveland, OH, standard level

$4,450 to $6,250

About $29 to $41 per linear ft before permits. Labor is about 46% of the bill.

Cost breakdown
PartLowHigh
Materials$2,250$3,350
Labor$2,100$2,750
Permits and fees$70$110
Total$4,450$6,250
Save and get a PDF report

Cost breakdown for 150 linear ft in Cleveland, OH

Part of the jobLowMidpointHighShare
Materials$1,400$2,800$4,20053%
Labor$1,650$2,450$3,25046%
Permits and fees$40$90$1402%
Total$3,050$5,350$7,600100%

What is behind the Cleveland number

The wage side of the estimate leans on carpenters, who do 60% of the hours on a typical job. Their local median is $29.16 an hour. Add the other trades involved and the blended wage index for Cleveland is 1.09 (US = 1.00), which puts labor at 46% of the total.

On the materials line, the BEA goods price index for the Cleveland metro is 93.6 (US = 100). The midpoint materials bill for 150 linear ft comes to $2,800, compared with $3,000 at national prices. Permit and inspection fees are scaled by the broader index (93.9) and land at $40 to $140.

When to schedule wood fence in Cleveland

We use NOAA's 1991-2020 climate normals for Cleveland Burke Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

March through November is the stretch where exterior installation runs into the fewest weather problems in Cleveland (9 of 12 months). January, February and December have an average daytime high under 45°F.

In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Cleveland gets about 33 inches of precipitation in a normal year. The wettest months are May, July and August (3.7 inches in July). Inside the workable window, March and June are the driest, at 2.4 and 2.8 inches. The station averages about 9 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Cleveland Burke Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan35241.8Cold
Feb37251.5Cold
Mar45312.4Workable
Apr57413.1Workable
May68533.5Workable
Jun77632.8Workable
Jul81683.7Workable
Aug80673.5Workable
Sep74602.9Workable
Oct63493.2Workable
Nov51382.9Workable
Dec40302.0Cold

What nearby projects cost in Cleveland

Because every project leans on different trades, Cleveland's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs +5% and vinyl fence −3%.

Related projects with local prices
ProjectSizeRangevs. US
Vinyl fence150 linear ft$4,400 – $8,950−3%
Chain-link fence150 linear ft$1,550 – $6,550+5%
Aluminum fence150 linear ft$3,850 – $11,400+1%
Wood deck300 sq ft$7,400 – $14,900−2%

Wood fence: what moves the price in Cleveland

  • Wood species

    A 6-ft privacy fence is $25-$50 per linear foot installed; an 8-ft one goes up to $75. Tropical hardwood privacy fences run $35-$55 (HomeGuide).

  • Style

    Split-rail and picket styles are cheaper to build than privacy fence, which uses more boards and takes more labor.

  • Height and permits

    Fences over about 6 ft often need a permit and a setback check. Permits run $40-$150.

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Cleveland is 1.09 times the national level.

For carpenters (47-2031, weighted 60%) the local median is $29.16 an hour, which is in line with the national $29.12. The middle half of them earn between $24.22 and $38.03 an hour. BLS counts 3,280 of them working in the area, 31.8 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Construction laborers (47-2061), 40% of the weighting: a median of $27.49 an hour, 21% above the US median of $22.66. The middle half of them earn between $22.57 and $34.86 an hour. About 5,660 work in the metro. That is 54.9 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($38.03 an hour) instead of the median, the labor line grows by about $410. At the 25th percentile ($24.22) it shrinks by about $230. The total moves by 7.7% or 4.3%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 1,031,130 jobs in the Cleveland area. That makes it the 36th largest of the 300 metros we cover, with 0.66% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)60%$24.22$29.16$38.03$29.121.00metro
Construction laborers (47-2061)40%$22.57$27.49$34.86$22.661.21metro
Blended100%1.09

Cleveland: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for Cleveland wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$3,050 to $4,900

Pine pickets or split rail, 4 ft

Standard

$4,450 to $6,250

6-ft cedar or treated privacy fence

Premium

$5,800 to $7,600

Premium hardwood or 8-ft privacy fence

Cost by size and quality level
SizeBasicStandardPremium
backyard (100 linear ft)$2,050 – $3,300$3,000 – $4,200$3,900 – $5,100
150 ft (150 linear ft)$3,050 – $4,900$4,450 – $6,250$5,800 – $7,600
200 ft (200 linear ft)$4,100 – $6,500$5,900 – $8,300$7,700 – $10,100
full lot (300 linear ft)$6,100 – $9,700$8,800 – $12,400$11,500 – $15,100

How Cleveland compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $5,100 to $5,450 across Cleveland and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Cleveland, OHthis page$3,050 – $7,600$5,350
Akron, OH35 miles$3,100 – $7,650$5,400+1%
Youngstown, OH45 miles$2,900 – $7,250$5,100−5%
Canton, OH65 miles$2,950 – $7,400$5,200−3%
Erie, PA75 miles$3,000 – $7,550$5,250−2%
Pittsburgh, PA115 miles$3,100 – $7,800$5,450+2%
Ohio (statewide)$3,050 – $7,600$5,300level
United States$3,050 – $7,650$5,350level

Across 300 US metros, Cleveland comes in at #103 from the top. The priciest is Honolulu, HI at $7,050; the cheapest is Brownsville, TX at $4,350 (midpoints, 150 linear ft). Statewide, Cleveland is 0% above the Ohio figure.

Other Ohio metros

Ohio metros compared with Cleveland
MetroSizeRangeMidpointvs. here
Columbus, OH1,105,580 jobs$3,200 – $7,850$5,550+4%
Cincinnati, OH1,101,030 jobs$3,050 – $7,550$5,300−1%
Dayton, OH372,660 jobs$3,000 – $7,450$5,200−2%
Akron, OH319,560 jobs$3,100 – $7,650$5,400+1%
Toledo, OH291,530 jobs$3,000 – $7,450$5,250−2%
Canton, OH163,080 jobs$2,950 – $7,400$5,200−3%

Cities with a workforce like Cleveland's

Big cities and small ones price differently, so here is Cleveland against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Sacramento, CA1,080,590 jobs$3,500 – $8,650$6,050+14%
Salt Lake City, UT826,210 jobs$3,000 – $7,500$5,250−2%
Kansas City, MO1,096,110 jobs$3,000 – $7,500$5,250−2%
Milwaukee, WI820,780 jobs$3,150 – $7,750$5,450+2%

Add-ons priced for Cleveland

Extras are quoted nationally and then scaled to Cleveland by the average of the local wage index (1.09) and goods index (0.94), a factor of 1.01. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add one gate (flat)$150 – $810

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,450 to $6,250 for Cleveland, OH is attached.

Take this estimate with you: PDF report, $9

Multi-page report for Cleveland, OH: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Wood fence in Cleveland: your questions

+How much does it cost to install a wood fence in Cleveland?

For 150 linear ft, expect $3,050 to $7,600 in the Cleveland area. A standard-spec job lands at $4,450 to $6,250. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for wood fence in Cleveland?

About $20 to $50 per linear ft for materials and labor, plus $40 to $140 for the permit if one is needed. The US range is $20 to $50.

+Is wood fence cheaper in Cleveland or Akron?

Akron is 35 miles away. The midpoint for 150 linear ft there is $5,400, which is 1% more than Cleveland ($5,350). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Cleveland?

About 46% at the midpoint, or $2,450 out of $5,350. Materials are 53% and permits 2%. Nationally, labor is 42%.

+What would 200 ft (200 linear ft) cost in Cleveland?

$4,100 to $10,100. Pick a different size in the estimator above to get your own number.

+Does wood fence need a permit in Cleveland?

Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $140 for fees in the Cleveland area (our national range of $40 to $150 scaled by the local price level).

+Is Cleveland expensive for wood fence compared with the rest of Ohio?

Cleveland is 0% above the Ohio statewide estimate ($5,300 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.

+What do carpenters earn in Cleveland?

The BLS median is $29.16 an hour in the Cleveland area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.22 to $38.03.

+What do basic and premium wood fence work cost in Cleveland?

For 150 linear ft, basic work runs $3,050 to $4,900 and premium work $5,800 to $7,600. Basic means: pine pickets or split rail, 4 ft. Premium means: premium hardwood or 8-ft privacy fence.

+When is the best time to install a wood fence in Cleveland?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and June are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add one gate" add in Cleveland?

$150 to $810, from a national range scaled by the local wage and goods indexes.

Wood fence near Cleveland

Wood fence: all pricesWood fence in OhioAll projects in ClevelandOhio cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.