Wood fence cost in Canton, OH
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $2,950 – $7,400
- Per linear ft
- $19.50 – $48.50
- before permit
- Versus US midpoint
- −3%
- US $5,350
- Rank of 300 metros
- #138
- 1 = most expensive
Local price for a wood fence in the Canton area: $2,950 to $7,400 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 3% lower than the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.6).
Estimate your wood fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Canton, OH, standard level
$4,300 to $6,050
About $28 to $39.50 per linear ft before permits. Labor is about 44% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,250 | $3,350 |
| Labor | $2,000 | $2,600 |
| Permits and fees | $65 | $100 |
| Total | $4,300 | $6,050 |
Cost breakdown for 150 linear ft in Canton, OH
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,400 | $2,800 | $4,200 | 54% |
| Labor | $1,500 | $2,300 | $3,050 | 44% |
| Permits and fees | $35 | $85 | $130 | 2% |
| Total | $2,950 | $5,200 | $7,400 | 100% |
What is behind the Canton number
We price the labor side from BLS wage data for 2 trades: carpenters at 60%, construction laborers at 40%. Weighted together, Canton wages are 1.02 times the national level. Labor makes up about 44% of the midpoint estimate (42% at national prices).
Materials are scaled with BEA's regional price parity for goods. Canton is at 93.6 against 100 for the US, so a materials line of $3,000 nationally becomes $2,800 here (midpoint, 150 linear ft). Permits follow the all-items index of 89.4: $35 to $130.
Optional extras in Canton
Add-ons start from national price ranges and are scaled by 0.98 for Canton, which is the average of the area's wage index (1.02) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $150 – $780 |
What nearby projects cost in Canton
Jobs that often go together with wood fence are priced below at their usual sizes, using the same Canton wage and price inputs. Compared with national midpoints, chain-link fence comes out highest (+1%) and wood deck lowest (−5%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,800 | −4% |
| Chain-link fence | 150 linear ft | $1,500 – $6,250 | +1% |
| Aluminum fence | 150 linear ft | $3,750 – $11,200 | −2% |
| Wood deck | 300 sq ft | $7,200 – $14,400 | −5% |
Who does the work: Canton trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Canton the blend is 1.02.
Carpenters (47-2031), 60% of the weighting: a median of $27.18 an hour, 7% below the US median of $29.12. The middle half of them earn between $21.33 and $34.27 an hour. About 380 work in the metro. That is 23.3 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $25.85 an hour, which is 14% above the national $22.66. The middle half of them earn between $21.85 and $35.80 an hour. BLS counts 1,100 of them working in the area, 67.5 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $330 to the midpoint estimate; the 25th percentile takes off about $270. That is a swing of roughly 5.2% to 6.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Canton-Massillon has 163,080 jobs in total (BLS, May 2025), ranking 145th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $21.33 | $27.18 | $34.27 | $29.12 | 0.93 | metro |
| Construction laborers (47-2061) | 40% | $21.85 | $25.85 | $35.80 | $22.66 | 1.14 | metro |
| Blended | 100% | 1.02 | |||||
The best months for wood fence in Canton
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Akron Canton Rgnl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Canton are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Canton gets about 42 inches of precipitation in a normal year, including roughly 47 inches of snow. The wettest months are May, June and July (4.4 inches in June). Inside the workable window, March and November are the driest, at 3.2 and 3.1 inches. The station averages about 11 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 36 | 20 | 2.9 | Cold |
| Feb | 39 | 22 | 2.4 | Cold |
| Mar | 48 | 29 | 3.2 | Workable |
| Apr | 62 | 40 | 3.9 | Workable |
| May | 72 | 50 | 4.1 | Workable |
| Jun | 80 | 59 | 4.4 | Workable |
| Jul | 84 | 63 | 4.1 | Workable |
| Aug | 83 | 62 | 3.6 | Workable |
| Sep | 76 | 55 | 3.5 | Workable |
| Oct | 63 | 44 | 3.3 | Workable |
| Nov | 51 | 34 | 3.1 | Workable |
| Dec | 40 | 26 | 2.9 | Cold |
Pick a size, pick a tier: wood fence pricing in Canton
The cited range is split into basic, standard and premium bands, then scaled to Canton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$2,950 to $4,750
Pine pickets or split rail, 4 ft
Standard
$4,300 to $6,050
6-ft cedar or treated privacy fence
Premium
$5,600 to $7,400
Premium hardwood or 8-ft privacy fence
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,000 – $3,200 | $2,900 – $4,100 | $3,800 – $5,000 |
| 150 ft (150 linear ft) | $2,950 – $4,750 | $4,300 – $6,050 | $5,600 – $7,400 |
| 200 ft (200 linear ft) | $3,950 – $6,300 | $5,700 – $8,050 | $7,450 – $9,800 |
| full lot (300 linear ft) | $5,900 – $9,400 | $8,500 – $12,000 | $11,200 – $14,700 |
How Canton compares
Of the five closest metros, 2 are cheaper than Canton. Wheeling is the lowest at about $4,950 (midpoint, 150 linear ft), 55 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Canton, OHthis page | $2,950 – $7,400 | $5,200 | |
| Akron, OH30 miles | $3,100 – $7,650 | $5,400 | +4% |
| Youngstown, OH40 miles | $2,900 – $7,250 | $5,100 | −2% |
| Wheeling, WV55 miles | $2,800 – $7,150 | $4,950 | −4% |
| Cleveland, OH65 miles | $3,050 – $7,600 | $5,350 | +3% |
| Pittsburgh, PA75 miles | $3,100 – $7,800 | $5,450 | +5% |
| Ohio (statewide) | $3,050 – $7,600 | $5,300 | +3% |
| United States | $3,050 – $7,650 | $5,350 | +3% |
Out of the 300 metros we cover, Canton ranks #138 for the cost of this job (#1 is the most expensive). Statewide, Canton is 3% below the Ohio figure.
Elsewhere in Ohio
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbus, OH | 1,105,580 jobs | $3,200 – $7,850 | $5,550 | +7% |
| Cincinnati, OH | 1,101,030 jobs | $3,050 – $7,550 | $5,300 | +2% |
| Cleveland, OH | 1,031,130 jobs | $3,050 – $7,600 | $5,350 | +3% |
| Dayton, OH | 372,660 jobs | $3,000 – $7,450 | $5,200 | +1% |
| Akron, OH | 319,560 jobs | $3,100 – $7,650 | $5,400 | +4% |
| Toledo, OH | 291,530 jobs | $3,000 – $7,450 | $5,250 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Canton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Beaumont, TX | 163,220 jobs | $2,850 – $7,200 | $5,050 | −3% |
| Shreveport, LA | 162,750 jobs | $2,650 – $6,700 | $4,650 | −10% |
| Spartanburg, SC | 165,150 jobs | $2,800 – $7,100 | $4,950 | −5% |
| Waterbury, CT | 160,710 jobs | $3,150 – $7,800 | $5,500 | +6% |
Why two Canton quotes can differ
Wood species
A 6-ft privacy fence is $25-$50 per linear foot installed; an 8-ft one goes up to $75. Tropical hardwood privacy fences run $35-$55 (HomeGuide).
Style
Split-rail and picket styles are cheaper to build than privacy fence, which uses more boards and takes more labor.
Height and permits
Fences over about 6 ft often need a permit and a setback check. Permits run $40-$150.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,300 to $6,050 for Canton, OH is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Canton, OH: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Wood fence in Canton: your questions
+How much does it cost to install a wood fence in Canton?
For 150 linear ft, expect $2,950 to $7,400 in the Canton area. A standard-spec job lands at $4,300 to $6,050. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for wood fence in Canton?
About $19.50 to $48.50 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $20 to $50.
+Is wood fence cheaper in Canton or Akron?
Akron is 30 miles away. The midpoint for 150 linear ft there is $5,400, which is 4% more than Canton ($5,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Canton?
About 44% at the midpoint, or $2,300 out of $5,200. Materials are 54% and permits 2%. Nationally, labor is 42%.
+What would 200 ft (200 linear ft) cost in Canton?
$3,950 to $9,800. Pick a different size in the estimator above to get your own number.
+Does wood fence need a permit in Canton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the Canton area (our national range of $40 to $150 scaled by the local price level).
+Is Canton expensive for wood fence compared with the rest of Ohio?
Canton is 3% below the Ohio statewide estimate ($5,300 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.
+What do carpenters earn in Canton?
The BLS median is $27.18 an hour in the Canton area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.33 to $34.27.
+What do basic and premium wood fence work cost in Canton?
For 150 linear ft, basic work runs $2,950 to $4,750 and premium work $5,600 to $7,400. Basic means: pine pickets or split rail, 4 ft. Premium means: premium hardwood or 8-ft privacy fence.
+When is the best time to install a wood fence in Canton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Canton?
$150 to $780, from a national range scaled by the local wage and goods indexes.
Wood fence near Canton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Wood Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020