Wood fence cost in Tallahassee, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $2,650 – $6,850
- Per linear ft
- $17.50 – $44.50
- before permit
- Versus US midpoint
- −11%
- US $5,350
- Rank of 300 metros
- #262
- 1 = most expensive
Tallahassee homeowners pay roughly $2,650 to $6,850 to install a wood fence at 150 linear ft, or $17.50 to $44.50 per linear ft (permit not included). Against the US midpoint, Tallahassee is 11% lower. Carpenters earn a median of $22.53 an hour in the Tallahassee area, 23% below the US median of $29.12.
Estimate your wood fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Tallahassee, FL, standard level
$3,900 to $5,600
About $25.50 to $36.50 per linear ft before permits. Labor is about 37% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,300 | $3,450 |
| Labor | $1,550 | $2,000 |
| Permits and fees | $70 | $110 |
| Total | $3,900 | $5,600 |
Cost breakdown for 150 linear ft in Tallahassee, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,450 | $2,900 | $4,350 | 61% |
| Labor | $1,200 | $1,800 | $2,400 | 37% |
| Permits and fees | $40 | $90 | $140 | 2% |
| Total | $2,650 | $4,750 | $6,850 | 100% |
Why Tallahassee prices look the way they do
We price the labor side from BLS wage data for 2 trades: carpenters at 60%, construction laborers at 40%. Weighted together, Tallahassee wages are 0.79 times the national level. Labor makes up about 37% of the midpoint estimate (42% at national prices).
On the materials line, the BEA goods price index for the Tallahassee metro is 96.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $2,900, compared with $3,000 at national prices. Permit and inspection fees are scaled by the broader index (93.9) and land at $40 to $140.
When to schedule wood fence in Tallahassee
We use NOAA's 1991-2020 climate normals for Tallahassee (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Tallahassee (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Tallahassee gets about 59 inches of precipitation in a normal year. The wettest months are June, July and August (7.8 inches in June). Inside the workable window, October and November are the driest, at 3.2 and 3.1 inches. The station averages about 103 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 64 | 41 | 4.4 | Workable |
| Feb | 68 | 44 | 4.3 | Workable |
| Mar | 74 | 49 | 5.2 | Workable |
| Apr | 80 | 54 | 3.5 | Workable |
| May | 87 | 63 | 3.4 | Workable |
| Jun | 91 | 71 | 7.8 | Hot |
| Jul | 92 | 73 | 7.1 | Hot |
| Aug | 92 | 73 | 7.6 | Hot |
| Sep | 89 | 70 | 4.9 | Workable |
| Oct | 82 | 59 | 3.2 | Workable |
| Nov | 73 | 48 | 3.1 | Workable |
| Dec | 66 | 43 | 4.2 | Workable |
Extras that change the Tallahassee total
Extras are quoted nationally and then scaled to Tallahassee by the average of the local wage index (0.79) and goods index (0.96), a factor of 0.88. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $130 – $700 |
What nearby projects cost in Tallahassee
Because every project leans on different trades, Tallahassee's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −7% and chain-link fence −14%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,250 – $8,450 | −7% |
| Chain-link fence | 150 linear ft | $1,400 – $5,250 | −14% |
| Aluminum fence | 150 linear ft | $3,400 – $10,300 | −10% |
| Wood deck | 300 sq ft | $6,650 – $13,400 | −12% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Tallahassee is 0.79 times the national level.
For carpenters (47-2031, weighted 60%) the local median is $22.53 an hour, which is 23% below the national $29.12. The middle half of them earn between $20.00 and $25.95 an hour. BLS counts 470 of them working in the area, 25.2 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 40% of the weighting: a median of $18.61 an hour, 18% below the US median of $22.66. The middle half of them earn between $16.91 and $21.61 an hour. About 1,390 work in the metro. That is 74.7 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($25.95 an hour) instead of the median, the labor line grows by about $160. At the 25th percentile ($20.00) it shrinks by about $120. The total moves by 3.3% or 2.5%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 186,160 jobs in the Tallahassee area. That makes it the 124th largest of the 300 metros we cover, with 0.12% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $20.00 | $22.53 | $25.95 | $29.12 | 0.77 | metro |
| Construction laborers (47-2061) | 40% | $16.91 | $18.61 | $21.61 | $22.66 | 0.82 | metro |
| Blended | 100% | 0.79 | |||||
Why two Tallahassee quotes can differ
Composite
A composite wood-look privacy fence is $55-$85 per linear foot installed (HomeGuide).
Wood species
A 6-ft privacy fence is $25-$50 per linear foot installed; an 8-ft one goes up to $75. Tropical hardwood privacy fences run $35-$55 (HomeGuide).
Style
Split-rail and picket styles are cheaper to build than privacy fence, which uses more boards and takes more labor.
Is Tallahassee cheap or dear? The local comparison
Of the five closest metros, 2 are cheaper than Tallahassee. Albany is the lowest at about $4,500 (midpoint, 150 linear ft), 90 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Tallahassee, FLthis page | $2,650 – $6,850 | $4,750 | |
| Panama City, FL80 miles | $2,750 – $7,050 | $4,900 | +3% |
| Albany, GA90 miles | $2,500 – $6,500 | $4,500 | −5% |
| Dothan, AL95 miles | $2,500 – $6,550 | $4,550 | −5% |
| Gainesville, FL115 miles | $2,750 – $6,950 | $4,850 | +2% |
| Crestview, FL125 miles | $2,800 – $7,100 | $4,950 | +4% |
| Florida (statewide) | $2,800 – $7,150 | $5,000 | +5% |
| United States | $3,050 – $7,650 | $5,350 | +12% |
Across 300 US metros, Tallahassee comes in at #262 from the top. The priciest is Honolulu, HI at $7,050; the cheapest is Brownsville, TX at $4,350 (midpoints, 150 linear ft). Statewide, Tallahassee is 5% below the Florida figure.
Other Florida metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $2,950 – $7,500 | $5,250 | +10% |
| Tampa, FL | 1,447,120 jobs | $2,800 – $7,100 | $4,950 | +4% |
| Orlando, FL | 1,411,730 jobs | $2,750 – $7,000 | $4,850 | +2% |
| Jacksonville, FL | 765,930 jobs | $2,800 – $7,100 | $4,950 | +4% |
| North Port, FL | 339,940 jobs | $2,850 – $7,200 | $5,000 | +5% |
| Cape Coral, FL | 304,790 jobs | $2,750 – $7,050 | $4,900 | +3% |
Cities with a workforce like Tallahassee's
Big cities and small ones price differently, so here is Tallahassee against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Salinas, CA | 186,430 jobs | $3,400 – $8,450 | $5,950 | +25% |
| York, PA | 183,590 jobs | $3,100 – $7,750 | $5,400 | +14% |
| Salem, OR | 188,620 jobs | $3,200 – $8,050 | $5,650 | +18% |
| Lincoln, NE | 182,620 jobs | $2,800 – $7,050 | $4,900 | +3% |
Tallahassee: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Tallahassee wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,650 to $4,350
Pine pickets or split rail, 4 ft
Standard
$3,900 to $5,600
6-ft cedar or treated privacy fence
Premium
$5,200 to $6,850
Premium hardwood or 8-ft privacy fence
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $1,800 – $2,900 | $2,650 – $3,750 | $3,500 – $4,600 |
| 150 ft (150 linear ft) | $2,650 – $4,350 | $3,900 – $5,600 | $5,200 – $6,850 |
| 200 ft (200 linear ft) | $3,550 – $5,750 | $5,200 – $7,400 | $6,850 – $9,100 |
| full lot (300 linear ft) | $5,300 – $8,600 | $7,800 – $11,100 | $10,300 – $13,600 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,900 to $5,600 for Tallahassee, FL is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Tallahassee, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Wood fence in Tallahassee: your questions
+How much does it cost to install a wood fence in Tallahassee?
For 150 linear ft, expect $2,650 to $6,850 in the Tallahassee area. A standard-spec job lands at $3,900 to $5,600. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for wood fence in Tallahassee?
About $17.50 to $44.50 per linear ft for materials and labor, plus $40 to $140 for the permit if one is needed. The US range is $20 to $50.
+Is wood fence cheaper in Tallahassee or Panama City?
Panama City is 80 miles away. The midpoint for 150 linear ft there is $4,900, which is 3% more than Tallahassee ($4,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Tallahassee?
About 37% at the midpoint, or $1,800 out of $4,750. Materials are 61% and permits 2%. Nationally, labor is 42%.
+What would 200 ft (200 linear ft) cost in Tallahassee?
$3,550 to $9,100. Pick a different size in the estimator above to get your own number.
+Does wood fence need a permit in Tallahassee?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $140 for fees in the Tallahassee area (our national range of $40 to $150 scaled by the local price level).
+Is Tallahassee expensive for wood fence compared with the rest of Florida?
Tallahassee is 5% below the Florida statewide estimate ($5,000 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Tallahassee?
The BLS median is $22.53 an hour in the Tallahassee area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.00 to $25.95.
+What do basic and premium wood fence work cost in Tallahassee?
For 150 linear ft, basic work runs $2,650 to $4,350 and premium work $5,200 to $6,850. Basic means: pine pickets or split rail, 4 ft. Premium means: premium hardwood or 8-ft privacy fence.
+When is the best time to install a wood fence in Tallahassee?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Tallahassee?
$130 to $700, from a national range scaled by the local wage and goods indexes.
Wood fence near Tallahassee
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Wood Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020