Vinyl siding cost in Bremerton, WA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $9,200 – $27,500
- Per sq ft of wall
- $4.35 – $13
- before permit
- Versus US midpoint
- +9%
- US $16,800
- Rank of 300 metros
- #42
- 1 = most expensive
Local price for new vinyl siding in the Bremerton area: $9,200 to $27,500 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% higher than the US figure. Carpenters earn a median of $31.25 an hour in the Bremerton area, 7% above the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Bremerton, WA, standard level
$14,700 to $22,000
About $7 to $10.50 per sq ft of wall before permits. Labor is about 52% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $7,050 | $10,600 |
| Labor | $7,650 | $11,400 |
| Permits and fees | $0 | $0 |
| Total | $14,700 | $22,000 |
Cost breakdown for 2,100 sq ft of wall in Bremerton, WA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,400 | $8,800 | $13,200 | 48% |
| Labor | $4,750 | $9,550 | $14,300 | 52% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $9,200 | $18,400 | $27,500 | 100% |
Where the Bremerton price comes from
The wage side of the estimate leans on carpenters, who do 60% of the hours on a typical job. Their local median is $31.25 an hour. Add the other trades involved and the blended wage index for Bremerton is 1.14 (US = 1.00), which puts labor at 52% of the total.
Materials are scaled with BEA's regional price parity for goods. Bremerton is at 105.0 against 100 for the US, so a materials line of $8,400 nationally becomes $8,800 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 105.6: $0 to $0.
The best months for vinyl siding in Bremerton
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Bremerton (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Bremerton: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Bremerton gets about 57 inches of precipitation in a normal year, including roughly 3 inches of snow. The wettest months are January, November and December (9.9 inches in December). The station averages about 4 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 47 | 36 | 9.3 | Workable |
| Feb | 49 | 35 | 5.8 | Workable |
| Mar | 54 | 38 | 6.4 | Workable |
| Apr | 59 | 41 | 3.9 | Workable |
| May | 66 | 47 | 2.4 | Workable |
| Jun | 70 | 51 | 1.6 | Workable |
| Jul | 77 | 55 | 0.8 | Workable |
| Aug | 77 | 55 | 1.1 | Workable |
| Sep | 72 | 51 | 1.8 | Workable |
| Oct | 61 | 45 | 5.1 | Workable |
| Nov | 51 | 39 | 8.8 | Workable |
| Dec | 46 | 35 | 9.9 | Workable |
Why two Bremerton quotes can differ
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Bremerton: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Bremerton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$9,200 to $16,500
Basic clapboard siding, simple house
Standard
$14,700 to $22,000
Mid-grade panels, standard trim and corners
Premium
$20,200 to $27,500
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $5,250 – $9,450 | $8,400 – $12,600 | $11,500 – $15,700 |
| average house (2,100 sq ft of wall) | $9,200 – $16,500 | $14,700 – $22,000 | $20,200 – $27,500 |
| large house (3,000 sq ft of wall) | $13,100 – $23,600 | $21,000 – $31,500 | $28,900 – $39,300 |
Who does the work: Bremerton trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Bremerton the blend is 1.14.
Carpenters (47-2031), 60% of the weighting: a median of $31.25 an hour, 7% above the US median of $29.12. The middle half of them earn between $28.92 and $42.18 an hour. About 940 work in the metro. That is 100.3 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $26.30 an hour, which is 16% above the national $22.66. The middle half of them earn between $22.39 and $31.03 an hour. BLS counts 620 of them working in the area, 66.1 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $42.66 an hour, 44% above the US median of $29.71. The middle half of them earn between $32.37 and $45.94 an hour. About 180 work in the metro. That is 19.2 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,900 to the midpoint estimate; the 25th percentile takes off about $400. That is a swing of roughly 2.2% to 10.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Bremerton-Silverdale-Port Orchard has 93,740 jobs in total (BLS, May 2025), ranking 216th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $28.92 | $31.25 | $42.18 | $29.12 | 1.07 | metro |
| Construction laborers (47-2061) | 30% | $22.39 | $26.30 | $31.03 | $22.66 | 1.16 | metro |
| Sheet metal workers (47-2211) | 10% | $32.37 | $42.66 | $45.94 | $29.71 | 1.44 | metro |
| Blended | 100% | 1.14 | |||||
What nearby projects cost in Bremerton
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Bremerton wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+15%) and roof replacement lowest (+7%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,550 – $13,400 | +7% |
| Gutters | 160 linear ft | $1,450 – $4,700 | +12% |
| Window replacement | 10 windows | $4,850 – $16,100 | +7% |
| Attic insulation | 1,000 sq ft | $1,200 – $4,550 | +15% |
| Metal roof | 2,000 sq ft of roof | $11,500 – $35,800 | +11% |
How Bremerton compares
Of the five closest metros, 2 are cheaper than Bremerton. Yakima is the lowest at about $17,800 (midpoint, 2,100 sq ft of wall), 120 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Bremerton, WAthis page | $9,200 – $27,500 | $18,400 | |
| Seattle, WA40 miles | $9,900 – $29,700 | $19,800 | +8% |
| Olympia, WA50 miles | $9,150 – $27,400 | $18,300 | level |
| Bellingham, WA90 miles | $9,650 – $28,900 | $19,300 | +5% |
| Yakima, WA120 miles | $8,900 – $26,600 | $17,800 | −3% |
| Portland, OR140 miles | $9,500 – $28,400 | $19,000 | +3% |
| Washington (statewide) | $9,700 – $29,000 | $19,400 | +5% |
| United States | $8,400 – $25,200 | $16,800 | −9% |
Out of the 300 metros we cover, Bremerton ranks #42 for the cost of this job (#1 is the most expensive). Statewide, Bremerton is 5% below the Washington figure.
Elsewhere in Washington
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Seattle, WA | 2,086,210 jobs | $9,900 – $29,700 | $19,800 | +8% |
| Spokane, WA | 255,820 jobs | $8,850 – $26,600 | $17,700 | −3% |
| Olympia, WA | 130,300 jobs | $9,150 – $27,400 | $18,300 | level |
| Kennewick, WA | 129,490 jobs | $9,200 – $27,600 | $18,400 | level |
| Yakima, WA | 97,010 jobs | $8,900 – $26,600 | $17,800 | −3% |
| Bellingham, WA | 91,390 jobs | $9,650 – $28,900 | $19,300 | +5% |
Metros of a similar size
Big cities and small ones price differently, so here is Bremerton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Oshkosh, WI | 93,750 jobs | $9,250 – $27,700 | $18,500 | +1% |
| Bellingham, WA | 91,390 jobs | $9,650 – $28,900 | $19,300 | +5% |
| Iowa City, IA | 93,760 jobs | $7,750 – $23,200 | $15,500 | −16% |
| Panama City, FL | 90,610 jobs | $7,600 – $22,800 | $15,200 | −17% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $14,700 to $22,000 for Bremerton, WA is attached.
Detailed vinyl siding report for Bremerton, WA, $9
Multi-page report for Bremerton, WA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Bremerton: your questions
+How much does it cost to install vinyl siding in Bremerton?
For 2,100 sq ft of wall, expect $9,200 to $27,500 in the Bremerton area. A standard-spec job lands at $14,700 to $22,000. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Bremerton?
About $4.35 to $13 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Bremerton or Seattle?
Seattle is 40 miles away. The midpoint for 2,100 sq ft of wall there is $19,800, which is 8% more than Bremerton ($18,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Bremerton?
About 52% at the midpoint, or $9,550 out of $18,400. Materials are 48% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Bremerton?
$9,200 to $27,500. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Bremerton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Bremerton area (our national range of $0 to $0 scaled by the local price level).
+Is Bremerton expensive for vinyl siding compared with the rest of Washington?
Bremerton is 5% below the Washington statewide estimate ($19,400 at the midpoint). We cover 7 metros in Washington; see the state page to compare them.
+What do carpenters earn in Bremerton?
The BLS median is $31.25 an hour in the Bremerton area, compared with $29.12 nationally. The 25th to 75th percentile range is $28.92 to $42.18.
+What do basic and premium vinyl siding work cost in Bremerton?
For 2,100 sq ft of wall, basic work runs $9,200 to $16,500 and premium work $20,200 to $27,500. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+Is there a bad season to install vinyl siding in Bremerton?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
Vinyl siding near Bremerton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.