Vinyl siding cost in Lancaster, PA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $8,250 – $24,800
- Per sq ft of wall
- $3.95 – $12
- before permit
- Versus US midpoint
- −2%
- US $16,800
- Rank of 300 metros
- #125
- 1 = most expensive
Local price for new vinyl siding in the Lancaster area: $8,250 to $24,800 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Carpenters earn a median of $26.77 an hour in the Lancaster area, 8% below the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Lancaster, PA, standard level
$13,200 to $19,800
About $6.30 to $9.45 per sq ft of wall before permits. Labor is about 49% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,750 | $10,100 |
| Labor | $6,450 | $9,650 |
| Permits and fees | $0 | $0 |
| Total | $13,200 | $19,800 |
Cost breakdown for 2,100 sq ft of wall in Lancaster, PA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,250 | $8,450 | $12,700 | 51% |
| Labor | $4,000 | $8,050 | $12,100 | 49% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $8,250 | $16,500 | $24,800 | 100% |
Why Lancaster prices look the way they do
Labor is 49% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Lancaster the blended ratio comes out at 0.96.
Materials are scaled with BEA's regional price parity for goods. Lancaster is at 100.7 against 100 for the US, so a materials line of $8,400 nationally becomes $8,450 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 98.3: $0 to $0.
Why two Lancaster quotes can differ
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Is Lancaster cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,100 sq ft of wall range from $16,500 to $17,300 across Lancaster and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Lancaster, PAthis page | $8,250 – $24,800 | $16,500 | |
| York, PA25 miles | $8,500 – $25,500 | $17,000 | +3% |
| Reading, PA30 miles | $8,300 – $24,800 | $16,600 | level |
| Harrisburg, PA45 miles | $8,400 – $25,200 | $16,800 | +2% |
| Philadelphia, PA50 miles | $8,650 – $25,900 | $17,300 | +5% |
| Baltimore, MD55 miles | $8,550 – $25,600 | $17,100 | +3% |
| Pennsylvania (statewide) | $8,400 – $25,100 | $16,800 | +2% |
| United States | $8,400 – $25,200 | $16,800 | +2% |
Out of the 300 metros we cover, Lancaster ranks #125 for the cost of this job (#1 is the most expensive). Statewide, Lancaster is 2% below the Pennsylvania figure.
Elsewhere in Pennsylvania
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $8,650 – $25,900 | $17,300 | +5% |
| Pittsburgh, PA | 1,114,490 jobs | $8,500 – $25,600 | $17,000 | +3% |
| Allentown, PA | 377,180 jobs | $8,450 – $25,400 | $16,900 | +3% |
| Harrisburg, PA | 335,010 jobs | $8,400 – $25,200 | $16,800 | +2% |
| Scranton, PA | 255,620 jobs | $8,450 – $25,400 | $16,900 | +3% |
| York, PA | 183,590 jobs | $8,500 – $25,500 | $17,000 | +3% |
Metros of a similar size
Big cities and small ones price differently, so here is Lancaster against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Scranton, PA | 255,620 jobs | $8,450 – $25,400 | $16,900 | +3% |
| Palm Bay, FL | 245,170 jobs | $7,550 – $22,700 | $15,100 | −8% |
| Spokane, WA | 255,820 jobs | $8,850 – $26,600 | $17,700 | +7% |
| Trenton, NJ | 240,190 jobs | $9,500 – $28,400 | $19,000 | +15% |
The best months for vinyl siding in Lancaster
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Lancaster 2Ne Fltr Plt (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Lancaster are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Lancaster gets about 44 inches of precipitation in a normal year, including roughly 21 inches of snow. The wettest months are July, September and October (4.8 inches in September). Inside the workable window, March and November are the driest, at 3.5 and 3.3 inches. The station averages about 20 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 40 | 22 | 3.0 | Cold |
| Feb | 43 | 24 | 2.5 | Cold |
| Mar | 52 | 31 | 3.5 | Workable |
| Apr | 65 | 41 | 3.5 | Workable |
| May | 75 | 50 | 3.6 | Workable |
| Jun | 83 | 60 | 4.1 | Workable |
| Jul | 87 | 65 | 4.5 | Workable |
| Aug | 85 | 63 | 3.6 | Workable |
| Sep | 78 | 56 | 4.8 | Workable |
| Oct | 66 | 44 | 4.2 | Workable |
| Nov | 55 | 34 | 3.3 | Workable |
| Dec | 44 | 27 | 3.5 | Cold |
Cost by quality level and size in Lancaster
The cited range is split into basic, standard and premium bands, then scaled to Lancaster. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$8,250 to $14,900
Basic clapboard siding, simple house
Standard
$13,200 to $19,800
Mid-grade panels, standard trim and corners
Premium
$18,200 to $24,800
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,700 – $8,500 | $7,550 – $11,300 | $10,400 – $14,100 |
| average house (2,100 sq ft of wall) | $8,250 – $14,900 | $13,200 – $19,800 | $18,200 – $24,800 |
| large house (3,000 sq ft of wall) | $11,800 – $21,200 | $18,900 – $28,300 | $25,900 – $35,400 |
Related projects, priced for Lancaster
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Lancaster wage and price inputs. Compared with national midpoints, gutters comes out highest (level) and roof replacement lowest (−2%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,950 – $12,300 | −2% |
| Gutters | 160 linear ft | $1,250 – $4,200 | level |
| Window replacement | 10 windows | $4,400 – $14,800 | −2% |
| Attic insulation | 1,000 sq ft | $990 – $3,950 | −1% |
| Metal roof | 2,000 sq ft of roof | $9,850 – $32,000 | −2% |
Who does the work: Lancaster trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Lancaster the blend is 0.96.
Carpenters (47-2031), 60% of the weighting: a median of $26.77 an hour, 8% below the US median of $29.12. The middle half of them earn between $22.56 and $29.68 an hour. About 2,750 work in the metro. That is 109.0 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $23.40 an hour, which is 3% above the national $22.66. The middle half of them earn between $21.76 and $28.00 an hour. BLS counts 2,270 of them working in the area, 90.0 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $28.79 an hour, 3% below the US median of $29.71. The middle half of them earn between $24.28 and $38.10 an hour. About 220 work in the metro. That is 8.7 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $500 to the midpoint estimate; the 25th percentile takes off about $730. That is a swing of roughly 4.4% to 3.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Lancaster has 252,230 jobs in total (BLS, May 2025), ranking 103rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $22.56 | $26.77 | $29.68 | $29.12 | 0.92 | metro |
| Construction laborers (47-2061) | 30% | $21.76 | $23.40 | $28.00 | $22.66 | 1.03 | metro |
| Sheet metal workers (47-2211) | 10% | $24.28 | $28.79 | $38.10 | $29.71 | 0.97 | metro |
| Blended | 100% | 0.96 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,200 to $19,800 for Lancaster, PA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Lancaster, PA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Lancaster: your questions
+How much does it cost to install vinyl siding in Lancaster?
For 2,100 sq ft of wall, expect $8,250 to $24,800 in the Lancaster area. A standard-spec job lands at $13,200 to $19,800. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Lancaster?
About $3.95 to $12 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Lancaster or York?
York is 25 miles away. The midpoint for 2,100 sq ft of wall there is $17,000, which is 3% more than Lancaster ($16,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Lancaster?
About 49% at the midpoint, or $8,050 out of $16,500. Materials are 51% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Lancaster?
$8,250 to $24,800. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Lancaster?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Lancaster area (our national range of $0 to $0 scaled by the local price level).
+Is Lancaster expensive for vinyl siding compared with the rest of Pennsylvania?
Lancaster is 2% below the Pennsylvania statewide estimate ($16,800 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.
+What do carpenters earn in Lancaster?
The BLS median is $26.77 an hour in the Lancaster area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.56 to $29.68.
+What do basic and premium vinyl siding work cost in Lancaster?
For 2,100 sq ft of wall, basic work runs $8,250 to $14,900 and premium work $18,200 to $24,800. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Lancaster?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Lancaster
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.