Vinyl siding cost in Allentown, PA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $8,450 – $25,400
- Per sq ft of wall
- $4.05 – $12
- before permit
- Versus US midpoint
- +1%
- US $16,800
- Rank of 300 metros
- #99
- 1 = most expensive
Allentown homeowners pay roughly $8,450 to $25,400 to install vinyl siding at 2,100 sq ft of wall, or $4.05 to $12 per sq ft of wall (permit not included). Against the US midpoint, Allentown is almost level. Carpenters earn a median of $28.63 an hour in the Allentown area, 2% below the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Allentown, PA, standard level
$13,500 to $20,300
About $6.45 to $9.65 per sq ft of wall before permits. Labor is about 50% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,750 | $10,100 |
| Labor | $6,800 | $10,200 |
| Permits and fees | $0 | $0 |
| Total | $13,500 | $20,300 |
Cost breakdown for 2,100 sq ft of wall in Allentown, PA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,200 | $8,450 | $12,700 | 50% |
| Labor | $4,250 | $8,500 | $12,700 | 50% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $8,450 | $16,900 | $25,400 | 100% |
What is behind the Allentown number
Labor is 50% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Allentown the blended ratio comes out at 1.01.
On the materials line, the BEA goods price index for the Allentown metro is 100.6 (US = 100). The midpoint materials bill for 2,100 sq ft of wall comes to $8,450, compared with $8,400 at national prices. Permit and inspection fees are scaled by the broader index (100.0) and land at $0 to $0.
When to schedule vinyl siding in Allentown
We use NOAA's 1991-2020 climate normals for Allentown Intl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Allentown (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Allentown gets about 47 inches of precipitation in a normal year, including roughly 33 inches of snow. The wettest months are July, August and September (5.3 inches in July). Inside the workable window, March and November are the driest, at 3.6 and 3.2 inches. The station averages about 18 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 38 | 22 | 3.3 | Cold |
| Feb | 42 | 23 | 2.8 | Cold |
| Mar | 51 | 31 | 3.6 | Workable |
| Apr | 63 | 40 | 3.7 | Workable |
| May | 74 | 51 | 3.6 | Workable |
| Jun | 82 | 60 | 4.4 | Workable |
| Jul | 86 | 65 | 5.3 | Workable |
| Aug | 84 | 63 | 4.6 | Workable |
| Sep | 77 | 55 | 4.8 | Workable |
| Oct | 66 | 44 | 4.1 | Workable |
| Nov | 54 | 34 | 3.2 | Workable |
| Dec | 43 | 27 | 3.9 | Cold |
Vinyl siding: what moves the price in Allentown
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Related projects, priced for Allentown
Because every project leans on different trades, Allentown's wage level does not move all prices equally. Against the US midpoint, roof replacement runs +3% and attic insulation −4%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,300 – $12,900 | +3% |
| Gutters | 160 linear ft | $1,300 – $4,300 | +2% |
| Window replacement | 10 windows | $4,550 – $15,100 | +1% |
| Attic insulation | 1,000 sq ft | $950 – $3,850 | −4% |
| Metal roof | 2,000 sq ft of roof | $10,600 – $33,400 | +3% |
Allentown: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Allentown wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$8,450 to $15,200
Basic clapboard siding, simple house
Standard
$13,500 to $20,300
Mid-grade panels, standard trim and corners
Premium
$18,600 to $25,400
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,850 – $8,700 | $7,750 – $11,600 | $10,600 – $14,500 |
| average house (2,100 sq ft of wall) | $8,450 – $15,200 | $13,500 – $20,300 | $18,600 – $25,400 |
| large house (3,000 sq ft of wall) | $12,100 – $21,800 | $19,300 – $29,000 | $26,600 – $36,300 |
Is Allentown cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,100 sq ft of wall range from $16,500 to $19,000 across Allentown and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Allentown, PAthis page | $8,450 – $25,400 | $16,900 | |
| Reading, PA40 miles | $8,300 – $24,800 | $16,600 | −2% |
| Scranton, PA45 miles | $8,450 – $25,400 | $16,900 | level |
| Trenton, NJ50 miles | $9,500 – $28,400 | $19,000 | +12% |
| Philadelphia, PA60 miles | $8,650 – $25,900 | $17,300 | +2% |
| Lancaster, PA70 miles | $8,250 – $24,800 | $16,500 | −2% |
| Pennsylvania (statewide) | $8,400 – $25,100 | $16,800 | −1% |
| United States | $8,400 – $25,200 | $16,800 | −1% |
Across 300 US metros, Allentown comes in at #99 from the top. The priciest is Honolulu, HI at $22,700; the cheapest is Brownsville, TX at $13,500 (midpoints, 2,100 sq ft of wall). Statewide, Allentown is 1% above the Pennsylvania figure.
Other Pennsylvania metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $8,650 – $25,900 | $17,300 | +2% |
| Pittsburgh, PA | 1,114,490 jobs | $8,500 – $25,600 | $17,000 | +1% |
| Harrisburg, PA | 335,010 jobs | $8,400 – $25,200 | $16,800 | −1% |
| Scranton, PA | 255,620 jobs | $8,450 – $25,400 | $16,900 | level |
| Lancaster, PA | 252,230 jobs | $8,250 – $24,800 | $16,500 | −2% |
| York, PA | 183,590 jobs | $8,500 – $25,500 | $17,000 | level |
Cities with a workforce like Allentown's
Big cities and small ones price differently, so here is Allentown against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Tucson, AZ | 389,630 jobs | $7,600 – $22,900 | $15,200 | −10% |
| Dayton, OH | 372,660 jobs | $8,250 – $24,800 | $16,500 | −2% |
| Boise, ID | 391,790 jobs | $7,800 – $23,400 | $15,600 | −8% |
| Greensboro, NC | 365,410 jobs | $7,600 – $22,800 | $15,200 | −10% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Allentown is 1.01 times the national level.
For carpenters (47-2031, weighted 60%) the local median is $28.63 an hour, which is in line with the national $29.12. The middle half of them earn between $23.31 and $32.64 an hour. BLS counts 1,390 of them working in the area, 36.9 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 30% of the weighting: a median of $23.70 an hour, 5% above the US median of $22.66. The middle half of them earn between $22.27 and $30.00 an hour. About 1,670 work in the metro. That is 44.3 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For sheet metal workers (47-2211, weighted 10%) the local median is $31.40 an hour, which is 6% above the national $29.71. The middle half of them earn between $24.61 and $51.36 an hour. BLS counts 190 of them working in the area, 5.0 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($32.64 an hour) instead of the median, the labor line grows by about $690. At the 25th percentile ($23.31) it shrinks by about $920. The total moves by 4.1% or 5.4%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 377,180 jobs in the Allentown-Bethlehem-Easton area. That makes it the 69th largest of the 300 metros we cover, with 0.24% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $23.31 | $28.63 | $32.64 | $29.12 | 0.98 | metro |
| Construction laborers (47-2061) | 30% | $22.27 | $23.70 | $30.00 | $22.66 | 1.05 | metro |
| Sheet metal workers (47-2211) | 10% | $24.61 | $31.40 | $51.36 | $29.71 | 1.06 | metro |
| Blended | 100% | 1.01 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,500 to $20,300 for Allentown, PA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Allentown, PA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Allentown: your questions
+How much does it cost to install vinyl siding in Allentown?
For 2,100 sq ft of wall, expect $8,450 to $25,400 in the Allentown area. A standard-spec job lands at $13,500 to $20,300. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Allentown?
About $4.05 to $12 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Allentown or Reading?
Reading is 40 miles away. The midpoint for 2,100 sq ft of wall there is $16,600, which is 2% less than Allentown ($16,900). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Allentown?
About 50% at the midpoint, or $8,500 out of $16,900. Materials are 50% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Allentown?
$8,450 to $25,400. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Allentown?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Allentown area (our national range of $0 to $0 scaled by the local price level).
+Is Allentown expensive for vinyl siding compared with the rest of Pennsylvania?
Allentown is 1% above the Pennsylvania statewide estimate ($16,800 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.
+What do carpenters earn in Allentown?
The BLS median is $28.63 an hour in the Allentown area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.31 to $32.64.
+What do basic and premium vinyl siding work cost in Allentown?
For 2,100 sq ft of wall, basic work runs $8,450 to $15,200 and premium work $18,600 to $25,400. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Allentown?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Allentown
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.