Vinyl siding cost in Grand Rapids, MI
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $8,050 – $24,100
- Per sq ft of wall
- $3.80 – $11.50
- before permit
- Versus US midpoint
- −4%
- US $16,800
- Rank of 300 metros
- #148
- 1 = most expensive
Local price for new vinyl siding in the Grand Rapids area: $8,050 to $24,100 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 4% lower than the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.7).
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Grand Rapids, MI, standard level
$12,800 to $19,300
About $6.10 to $9.20 per sq ft of wall before permits. Labor is about 51% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,300 | $9,450 |
| Labor | $6,550 | $9,800 |
| Permits and fees | $0 | $0 |
| Total | $12,800 | $19,300 |
Cost breakdown for 2,100 sq ft of wall in Grand Rapids, MI
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,950 | $7,850 | $11,800 | 49% |
| Labor | $4,100 | $8,200 | $12,300 | 51% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $8,050 | $16,100 | $24,100 | 100% |
What is behind the Grand Rapids number
Labor is 51% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Grand Rapids the blended ratio comes out at 0.97.
Materials are scaled with BEA's regional price parity for goods. Grand Rapids is at 93.7 against 100 for the US, so a materials line of $8,400 nationally becomes $7,850 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 95.5: $0 to $0.
Is Grand Rapids cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,100 sq ft of wall range from $15,500 to $17,300 across Grand Rapids and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Grand Rapids, MIthis page | $8,050 – $24,100 | $16,100 | |
| Muskegon, MI45 miles | $7,750 – $23,300 | $15,500 | −3% |
| Kalamazoo, MI50 miles | $8,400 – $25,200 | $16,800 | +5% |
| Lansing, MI60 miles | $8,650 – $25,900 | $17,300 | +8% |
| South Bend, IN85 miles | $8,450 – $25,300 | $16,900 | +5% |
| Saginaw, MI85 miles | $8,250 – $24,800 | $16,500 | +3% |
| Michigan (statewide) | $8,350 – $25,100 | $16,700 | +4% |
| United States | $8,400 – $25,200 | $16,800 | +5% |
Out of the 300 metros we cover, Grand Rapids ranks #148 for the cost of this job (#1 is the most expensive). Statewide, Grand Rapids is 4% below the Michigan figure.
Elsewhere in Michigan
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Detroit, MI | 1,904,530 jobs | $8,950 – $26,800 | $17,900 | +11% |
| Ann Arbor, MI | 219,730 jobs | $8,500 – $25,600 | $17,000 | +6% |
| Lansing, MI | 217,180 jobs | $8,650 – $25,900 | $17,300 | +8% |
| Flint, MI | 135,040 jobs | $8,550 – $25,700 | $17,100 | +7% |
| Kalamazoo, MI | 121,790 jobs | $8,400 – $25,200 | $16,800 | +5% |
| Saginaw, MI | 80,000 jobs | $8,250 – $24,800 | $16,500 | +3% |
Metros of a similar size
Big cities and small ones price differently, so here is Grand Rapids against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Hartford, CT | 599,770 jobs | $8,800 – $26,400 | $17,600 | +10% |
| Buffalo, NY | 534,550 jobs | $8,700 – $26,000 | $17,400 | +8% |
| Memphis, TN | 611,670 jobs | $7,750 – $23,300 | $15,500 | −3% |
| Birmingham, AL | 520,290 jobs | $7,500 – $22,500 | $15,000 | −7% |
Grand Rapids: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Grand Rapids. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$8,050 to $14,500
Basic clapboard siding, simple house
Standard
$12,800 to $19,300
Mid-grade panels, standard trim and corners
Premium
$17,700 to $24,100
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,600 – $8,250 | $7,350 – $11,000 | $10,100 – $13,800 |
| average house (2,100 sq ft of wall) | $8,050 – $14,500 | $12,800 – $19,300 | $17,700 – $24,100 |
| large house (3,000 sq ft of wall) | $11,500 – $20,600 | $18,400 – $27,500 | $25,200 – $34,400 |
The best months for vinyl siding in Grand Rapids
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, E Grand Rapids (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Grand Rapids are April through November: 8 of 12. Outside them, January, February, March and December have an average daytime high under 45°F.
In January, February, March and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Grand Rapids gets about 40 inches of precipitation in a normal year, including roughly 75 inches of snow. The wettest months are April, May and June (4.4 inches in May). Inside the workable window, August and November are the driest, at 3.0 and 3.3 inches. The station averages about 9 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 31 | 17 | 2.7 | Cold |
| Feb | 34 | 18 | 2.1 | Cold |
| Mar | 44 | 24 | 2.6 | Cold |
| Apr | 57 | 35 | 4.1 | Workable |
| May | 69 | 46 | 4.4 | Workable |
| Jun | 79 | 56 | 4.0 | Workable |
| Jul | 82 | 60 | 3.3 | Workable |
| Aug | 81 | 58 | 3.0 | Workable |
| Sep | 74 | 51 | 3.5 | Workable |
| Oct | 61 | 40 | 3.7 | Workable |
| Nov | 47 | 31 | 3.3 | Workable |
| Dec | 36 | 23 | 2.8 | Cold |
Why two Grand Rapids quotes can differ
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
What nearby projects cost in Grand Rapids
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Grand Rapids wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−5%) and metal roof lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,600 – $11,600 | −8% |
| Gutters | 160 linear ft | $1,200 – $3,900 | −7% |
| Window replacement | 10 windows | $4,150 – $13,900 | −7% |
| Attic insulation | 1,000 sq ft | $950 – $3,800 | −5% |
| Metal roof | 2,000 sq ft of roof | $9,200 – $29,900 | −8% |
Who does the work: Grand Rapids trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Grand Rapids the blend is 0.97.
Carpenters (47-2031), 60% of the weighting: a median of $28.36 an hour, in line with the US median of $29.12. The middle half of them earn between $22.88 and $31.12 an hour. About 2,840 work in the metro. That is 47.5 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 30%) the local median is $22.97 an hour, which is in line with the national $22.66. The middle half of them earn between $20.19 and $28.78 an hour. BLS counts 3,990 of them working in the area, 66.7 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $25.62 an hour, 14% below the US median of $29.71. The middle half of them earn between $21.94 and $38.13 an hour. About 630 work in the metro. That is 10.5 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $480 to the midpoint estimate; the 25th percentile takes off about $950. That is a swing of roughly 5.9% to 3.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Grand Rapids-Wyoming-Kentwood has 598,260 jobs in total (BLS, May 2025), ranking 48th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $22.88 | $28.36 | $31.12 | $29.12 | 0.97 | metro |
| Construction laborers (47-2061) | 30% | $20.19 | $22.97 | $28.78 | $22.66 | 1.01 | metro |
| Sheet metal workers (47-2211) | 10% | $21.94 | $25.62 | $38.13 | $29.71 | 0.86 | metro |
| Blended | 100% | 0.97 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $12,800 to $19,300 for Grand Rapids, MI is attached.
Detailed vinyl siding report for Grand Rapids, MI, $9
The report lays out the vinyl siding numbers for Grand Rapids, MI line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Grand Rapids: your questions
+How much does it cost to install vinyl siding in Grand Rapids?
For 2,100 sq ft of wall, expect $8,050 to $24,100 in the Grand Rapids area. A standard-spec job lands at $12,800 to $19,300. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Grand Rapids?
About $3.80 to $11.50 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Grand Rapids or Muskegon?
Muskegon is 45 miles away. The midpoint for 2,100 sq ft of wall there is $15,500, which is 3% less than Grand Rapids ($16,100). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Grand Rapids?
About 51% at the midpoint, or $8,200 out of $16,100. Materials are 49% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Grand Rapids?
$8,050 to $24,100. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Grand Rapids?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Grand Rapids area (our national range of $0 to $0 scaled by the local price level).
+Is Grand Rapids expensive for vinyl siding compared with the rest of Michigan?
Grand Rapids is 4% below the Michigan statewide estimate ($16,700 at the midpoint). We cover 10 metros in Michigan; see the state page to compare them.
+What do carpenters earn in Grand Rapids?
The BLS median is $28.36 an hour in the Grand Rapids area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.88 to $31.12.
+What do basic and premium vinyl siding work cost in Grand Rapids?
For 2,100 sq ft of wall, basic work runs $8,050 to $14,500 and premium work $17,700 to $24,100. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Grand Rapids?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. August and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Grand Rapids
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.