Vinyl siding cost in Riverside, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $9,250 – $27,800
- Per sq ft of wall
- $4.40 – $13
- before permit
- Versus US midpoint
- +10%
- US $16,800
- Rank of 300 metros
- #38
- 1 = most expensive
Riverside homeowners pay roughly $9,250 to $27,800 to install vinyl siding at 2,100 sq ft of wall, or $4.40 to $13 per sq ft of wall (permit not included). Against the US midpoint, Riverside is 10% higher. Carpenters earn a median of $34.08 an hour in the Riverside area, 17% above the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Riverside, CA, standard level
$14,800 to $22,200
About $7.05 to $10.50 per sq ft of wall before permits. Labor is about 54% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,800 | $10,200 |
| Labor | $8,000 | $12,000 |
| Permits and fees | $0 | $0 |
| Total | $14,800 | $22,200 |
Cost breakdown for 2,100 sq ft of wall in Riverside, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,250 | $8,500 | $12,800 | 46% |
| Labor | $5,000 | $10,000 | $15,000 | 54% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $9,250 | $18,500 | $27,800 | 100% |
Where the Riverside price comes from
We price the labor side from BLS wage data for 3 trades: carpenters at 60%, construction laborers at 30%, sheet metal workers at 10%. Weighted together, Riverside wages are 1.19 times the national level. Labor makes up about 54% of the midpoint estimate (50% at national prices).
On the materials line, the BEA goods price index for the Riverside metro is 101.4 (US = 100). The midpoint materials bill for 2,100 sq ft of wall comes to $8,500, compared with $8,400 at national prices. Permit and inspection fees are scaled by the broader index (106.4) and land at $0 to $0.
Planning more than one job in Riverside?
Because every project leans on different trades, Riverside's wage level does not move all prices equally. Against the US midpoint, roof replacement runs +9% and attic insulation +1%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,750 – $13,600 | +9% |
| Gutters | 160 linear ft | $1,400 – $4,500 | +7% |
| Window replacement | 10 windows | $4,700 – $15,600 | +4% |
| Attic insulation | 1,000 sq ft | $1,000 – $4,050 | +1% |
| Metal roof | 2,000 sq ft of roof | $11,200 – $34,900 | +8% |
When to schedule vinyl siding in Riverside
We use NOAA's 1991-2020 climate normals for Riverside Fire Stn 3 (in the city). These are 30-year monthly averages, not forecasts.
October through June is the stretch where exterior installation runs into the fewest weather problems in Riverside (9 of 12 months). July, August and September have an average daytime high of 90°F or more.
Riverside gets about 10 inches of precipitation in a normal year. The wettest months are January, February and March (2.5 inches in February). Inside the workable window, May and June are the driest, at 0.2 and 0.1 inches. The station averages about 110 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 70 | 43 | 2.2 | Workable |
| Feb | 70 | 44 | 2.5 | Workable |
| Mar | 73 | 46 | 1.6 | Workable |
| Apr | 78 | 50 | 0.6 | Workable |
| May | 81 | 55 | 0.2 | Workable |
| Jun | 89 | 59 | 0.1 | Workable |
| Jul | 95 | 64 | 0.1 | Hot |
| Aug | 97 | 65 | 0.1 | Hot |
| Sep | 93 | 62 | 0.1 | Hot |
| Oct | 84 | 55 | 0.4 | Workable |
| Nov | 76 | 47 | 0.7 | Workable |
| Dec | 69 | 42 | 1.4 | Workable |
Riverside: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Riverside wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$9,250 to $16,700
Basic clapboard siding, simple house
Standard
$14,800 to $22,200
Mid-grade panels, standard trim and corners
Premium
$20,400 to $27,800
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $5,300 – $9,550 | $8,450 – $12,700 | $11,700 – $15,900 |
| average house (2,100 sq ft of wall) | $9,250 – $16,700 | $14,800 – $22,200 | $20,400 – $27,800 |
| large house (3,000 sq ft of wall) | $13,200 – $23,800 | $21,200 – $31,800 | $29,100 – $39,700 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Riverside is 1.19 times the national level.
For carpenters (47-2031, weighted 60%) the local median is $34.08 an hour, which is 17% above the national $29.12. The middle half of them earn between $26.27 and $43.08 an hour. BLS counts 12,970 of them working in the area, 75.5 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $28.61 an hour, 26% above the US median of $22.66. The middle half of them earn between $22.57 and $37.37 an hour. About 12,120 work in the metro. That is 70.6 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For sheet metal workers (47-2211, weighted 10%) the local median is $33.07 an hour, which is 11% above the national $29.71. The middle half of them earn between $24.69 and $46.53 an hour. BLS counts 750 of them working in the area, 4.4 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($43.08 an hour) instead of the median, the labor line grows by about $1,550. At the 25th percentile ($26.27) it shrinks by about $1,350. The total moves by 8.4% or 7.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 1,716,760 jobs in the Riverside-San Bernardino-Ontario area. That makes it the 16th largest of the 300 metros we cover, with 1.10% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $26.27 | $34.08 | $43.08 | $29.12 | 1.17 | metro |
| Construction laborers (47-2061) | 30% | $22.57 | $28.61 | $37.37 | $22.66 | 1.26 | metro |
| Sheet metal workers (47-2211) | 10% | $24.69 | $33.07 | $46.53 | $29.71 | 1.11 | metro |
| Blended | 100% | 1.19 | |||||
How Riverside compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,100 sq ft of wall range from $16,500 to $19,400 across Riverside and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Riverside, CAthis page | $9,250 – $27,800 | $18,500 | |
| San Diego, CA110 miles | $9,650 – $29,000 | $19,300 | +4% |
| El Centro, CA115 miles | $9,450 – $28,400 | $18,900 | +2% |
| Los Angeles, CA120 miles | $9,700 – $29,100 | $19,400 | +5% |
| Las Vegas, NV130 miles | $8,250 – $24,700 | $16,500 | −11% |
| Bakersfield, CA155 miles | $9,200 – $27,600 | $18,400 | −1% |
| California (statewide) | $9,750 – $29,200 | $19,500 | +5% |
| United States | $8,400 – $25,200 | $16,800 | −9% |
Across 300 US metros, Riverside comes in at #38 from the top. The priciest is Honolulu, HI at $22,700; the cheapest is Brownsville, TX at $13,500 (midpoints, 2,100 sq ft of wall). Statewide, Riverside is 5% below the California figure.
Other California metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $9,700 – $29,100 | $19,400 | +5% |
| San Francisco, CA | 2,373,920 jobs | $10,900 – $32,700 | $21,800 | +18% |
| San Diego, CA | 1,538,060 jobs | $9,650 – $29,000 | $19,300 | +4% |
| San Jose, CA | 1,134,970 jobs | $10,300 – $31,000 | $20,700 | +11% |
| Sacramento, CA | 1,080,590 jobs | $9,650 – $28,900 | $19,300 | +4% |
| Fresno, CA | 476,890 jobs | $9,050 – $27,100 | $18,100 | −3% |
Cities with a workforce like Riverside's
Big cities and small ones price differently, so here is Riverside against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Detroit, MI | 1,904,530 jobs | $8,950 – $26,800 | $17,900 | −4% |
| Denver, CO | 1,609,350 jobs | $8,650 – $26,000 | $17,300 | −7% |
| Minneapolis, MN | 1,951,650 jobs | $9,550 – $28,700 | $19,100 | +3% |
| San Diego, CA | 1,538,060 jobs | $9,650 – $29,000 | $19,300 | +4% |
Specs and site conditions that change a Riverside bid
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $14,800 to $22,200 for Riverside, CA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Riverside, CA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Riverside: your questions
+How much does it cost to install vinyl siding in Riverside?
For 2,100 sq ft of wall, expect $9,250 to $27,800 in the Riverside area. A standard-spec job lands at $14,800 to $22,200. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Riverside?
About $4.40 to $13 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Riverside or San Diego?
San Diego is 110 miles away. The midpoint for 2,100 sq ft of wall there is $19,300, which is 4% more than Riverside ($18,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Riverside?
About 54% at the midpoint, or $10,000 out of $18,500. Materials are 46% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Riverside?
$9,250 to $27,800. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Riverside?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Riverside area (our national range of $0 to $0 scaled by the local price level).
+Is Riverside expensive for vinyl siding compared with the rest of California?
Riverside is 5% below the California statewide estimate ($19,500 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do carpenters earn in Riverside?
The BLS median is $34.08 an hour in the Riverside area, compared with $29.12 nationally. The 25th to 75th percentile range is $26.27 to $43.08.
+What do basic and premium vinyl siding work cost in Riverside?
For 2,100 sq ft of wall, basic work runs $9,250 to $16,700 and premium work $20,400 to $27,800. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Riverside?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through June. May and June are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Riverside
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.