Vinyl siding cost in Bakersfield, CA

Pick a size, pick a tier: vinyl siding pricing in Bakersfield

The cited range is split into basic, standard and premium bands, then scaled to Bakersfield. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).

Who does the work: Bakersfield trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Bakersfield the blend is 1.14.

Carpenters (47-2031), 60% of the weighting: a median of $31.99 an hour, 10% above the US median of $29.12. The middle half of them earn between $24.72 and $38.81 an hour. About 1,100 work in the metro. That is 32.5 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $26.83 an hour, which is 18% above the national $22.66. The middle half of them earn between $22.25 and $35.76 an hour. BLS counts 1,480 of them working in the area, 43.8 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

Sheet metal workers (47-2211), 10% of the weighting: a median of $35.91 an hour, 21% above the US median of $29.71. The middle half of them earn between $28.63 and $47.38 an hour. About 170 work in the metro. That is 5.0 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,200 to the midpoint estimate; the 25th percentile takes off about $1,250. That is a swing of roughly 6.8% to 6.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Bakersfield-Delano has 338,230 jobs in total (BLS, May 2025), ranking 77th by size among the 300 metros on this site.

Specs and site conditions that change a Bakersfield bid

• Wall area is not floor area

  A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.

• Style

  Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).

• Old siding removal

  Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.

How Bakersfield compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,100 sq ft of wall range from $17,800 to $19,500 across Bakersfield and its five closest metros.

Out of the 300 metros we cover, Bakersfield ranks #41 for the cost of this job (#1 is the most expensive). Statewide, Bakersfield is 6% below the California figure.

Elsewhere in California

Metros of a similar size

Big cities and small ones price differently, so here is Bakersfield against the 4 metros with the closest total employment.

What nearby projects cost in Bakersfield

Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Bakersfield wage and price inputs. Compared with national midpoints, gutters comes out highest (+9%) and attic insulation lowest (+4%); the gap comes from the trades each job uses.

The best months for vinyl siding in Bakersfield

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Bakersfield Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Bakersfield are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.

Bakersfield gets about 6 inches of precipitation in a normal year. The wettest months are January, February and March (1.2 inches in January). Inside the workable window, May and October are the driest, at 0.3 and 0.3 inches. The station averages about 112 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.