Skip to content
CostLocal

Vinyl fence cost in Washington

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (150 linear ft)
$4,850 – $9,950
Per linear ft
$32 – $65.50
before permit
Versus US midpoint
+8%
US $6,850
Metros covered
7

Washington prices for vinyl fence: $4,850 to $9,950 for 150 linear ft, or $32 to $65.50 per linear ft without the permit. The state midpoint is 8% above the national one. Local wages for carpenters are $35.67 an hour.

Inside Washington, the metros we cover range from $7,150 (Yakima) to $7,450 (Seattle) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your vinyl fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

6-ft privacy fence, standard white

Add-ons

Estimated cost for 150 linear ft in Washington (statewide), standard level

$6,400 to $8,450

About $42 to $55.50 per linear ft before permits. Labor is about 25% of the bill.

Cost breakdown
PartLowHigh
Materials$4,850$6,100
Labor$1,450$2,200
Permits and fees$80$130
Total$6,400$8,450
Save and get a PDF report

Cost breakdown for 150 linear ft in Washington

Part of the jobLowMidpointHighShare
Materials$3,900$5,500$7,05074%
Labor$920$1,850$2,75025%
Permits and fees$45$100$1601%
Total$4,850$7,400$9,950100%

Weather windows across Washington

Weather decides when exterior installation can happen, and Washington is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.

Seattle has the longest comfortable season of the metros we cover in Washington at 12 months; Kennewick has the shortest at 8 (February through June and September through November). Rainfall runs from 8 inches a year in Kennewick to 57 inches in Bremerton.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Seattle37773812: all year
Spokane2687179: March through November
Olympia33785112: all year
Kennewick289388: February through June and September through November
Yakima249089: February through June and August through November
Bremerton36775712: all year
Bellingham34733512: all year

Vinyl fence cost by metro in Washington

1 of the 7 metros sit above the statewide midpoint of $7,400, and the top-to-bottom gap is 4%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (150 linear ft)Midpointvs. state
Seattle, WA$4,900 – $10,000$7,450+1%
Bellingham, WA$4,900 – $10,000$7,450level
Bremerton, WA$4,800 – $9,750$7,300−2%
Kennewick, WA$4,800 – $9,750$7,300−2%
Olympia, WA$4,800 – $9,700$7,250−2%
Spokane, WA$4,750 – $9,600$7,200−3%
Yakima, WA$4,750 – $9,550$7,150−3%

What carpenters and the other trades earn in Washington

Washington's labor line is priced from 2 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 1.22 times the national level.

Carpenters (47-2031), 50% of the weighting: a median of $35.67 an hour, 22% above the US median of $29.12. The middle half of them earn between $29.15 and $44.55 an hour. About 26,960 work in the state. That is 75.9 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.

For construction laborers (47-2061, weighted 50%) the local median is $27.75 an hour, which is 22% above the national $22.66. The middle half of them earn between $22.56 and $34.69 an hour. BLS counts 25,060 of them working in the state, 70.6 for every 10,000 jobs (US: 70.5), so the local bench is about average.

A crew paid at the 75th percentile for carpenters ($44.55 an hour) would add about $230 to the statewide midpoint; one at the 25th percentile ($29.15) would take off about $170. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 3,550,970 jobs across Washington (May 2025), which is 2.3% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)50%$29.15$35.67$44.55$29.121.22state
Construction laborers (47-2061)50%$22.56$27.75$34.69$22.661.22state
Blended100%1.22

Washington versus the states around it

Washington ranks 7 of 51 (the 50 states plus DC) for vinyl fence, where 1 is the most expensive. The costliest is Hawaii at $8,250 and the cheapest Arkansas at $6,200, both for 150 linear ft at the midpoint. Washington sits at $7,400. The five states closest by workforce center are listed below.

States near Washington, same project and size
StateDistanceRangeMidpointvs. here
Oregon170 miles away$4,800 – $9,650$7,200−3%
Idaho380 miles away$4,350 – $8,750$6,550−12%
Montana500 miles away$4,400 – $8,900$6,650−10%
Utah650 miles away$4,350 – $8,750$6,550−12%
Nevada780 miles away$4,450 – $9,000$6,700−10%

Why two Washington quotes can differ

  • Type and height

    A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).

  • Gates

    A vinyl gate costs $150-$780 installed, more for large or complex ones.

  • Removal

    Taking down an old fence is $10-$20 per linear foot extra, with disposal.

  • Permit

    Fence permits run $40-$150 depending on location.

Basic, standard or premium: Washington prices

Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from backyard (100 linear ft) to full lot (300 linear ft).

Basic

$4,850 to $6,900

4-ft picket or ranch rail

Standard

$6,400 to $8,450

6-ft privacy fence, standard white

Premium

$7,950 to $9,950

Tall or colored privacy, many corners and gates

Cost by size and quality level
SizeBasicStandardPremium
backyard (100 linear ft)$3,250 – $4,650$4,300 – $5,650$5,300 – $6,700
150 ft (150 linear ft)$4,850 – $6,900$6,400 – $8,450$7,950 – $9,950
200 ft (200 linear ft)$6,500 – $9,200$8,500 – $11,200$10,500 – $13,200
full lot (300 linear ft)$9,700 – $13,700$12,700 – $16,700$15,700 – $19,800

Extras that change the Washington total

Add-ons start from national price ranges and are scaled by 1.13 for Washington, which is the average of the area's wage index (1.22) and goods price index (1.04). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add one gate (flat)$170 – $880
Remove old fence$1,700 – $3,400

If you are planning more than one job in Washington

Each project weights the trades differently, so Washington's wage level does not push every price by the same amount. Compared with the US midpoint, concrete slab is +16% and wood fence +12%.

Related projects with local prices
ProjectSizeRangevs. US
Wood fence150 linear ft$3,450 – $8,550+12%
Chain-link fence150 linear ft$1,700 – $7,150+15%
Aluminum fence150 linear ft$4,350 – $12,900+13%
Concrete slab400 sq ft$2,850 – $5,950+16%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,400 to $8,450 for Washington is attached.

Take this estimate with you: PDF report, $9

Multi-page report for Washington: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Vinyl fence in Washington: your questions

+How much does it cost to install a vinyl fence in Washington?

$4,850 to $9,950 for 150 linear ft, using statewide wages and prices. Metro areas inside Washington can sit above or below that.

+Which city in Washington is cheapest for vinyl fence?

Yakima at about $7,150 (midpoint, 150 linear ft). The priciest is Seattle at $7,450.

+Is vinyl fence cheaper in Washington than the US average?

It is 8% more expensive: $7,400 against $6,850 for 150 linear ft at the midpoint.

+What share of the price is labor in Washington?

About 25% ($1,850). Materials are 74%. Statewide labor for this job is weighted 1.22x the national wage level.

+What do carpenters earn in Washington?

The BLS statewide median is $35.67 an hour, against $29.12 for the US. The 25th to 75th percentile range is $29.15 to $44.55.

+Where does Washington rank for vinyl fence costs?

7th most expensive of 51 (the 50 states plus DC) at the midpoint, $7,400 for 150 linear ft. Rank 1 is the costliest.

+What do basic and premium vinyl fence work cost in Washington?

For 150 linear ft, basic work runs $4,850 to $6,900 and premium work $7,950 to $9,950. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.

+Does the season matter for vinyl fence in Washington?

Yes where winters or summers are hard. Of the Washington metros we cover, Seattle has the most comfortable months (12 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add one gate" add in Washington?

$170 to $880, from a national range scaled by the statewide wage and goods indexes.

Vinyl fence by city in Washington

Vinyl fence: all pricesWashington cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.