Vinyl fence cost in Rapid City, SD
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,550
- Per linear ft
- $28.50 – $56
- before permit
- Versus US midpoint
- −6%
- US $6,850
- Rank of 300 metros
- #220
- 1 = most expensive
Local price for a vinyl fence in the Rapid City area: $4,300 to $8,550 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Building materials run about 5% below the US average here (BEA goods price index 95.5).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Rapid City, SD, standard level
$5,550 to $7,300
About $36.50 to $48 per linear ft before permits. Labor is about 21% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,450 | $5,600 |
| Labor | $1,050 | $1,600 |
| Permits and fees | $65 | $100 |
| Total | $5,550 | $7,300 |
Cost breakdown for 150 linear ft in Rapid City, SD
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,000 | $6,450 | 78% |
| Labor | $660 | $1,350 | $2,000 | 21% |
| Permits and fees | $35 | $85 | $130 | 1% |
| Total | $4,300 | $6,450 | $8,550 | 100% |
Why Rapid City prices look the way they do
We price the labor side from BLS wage data for 2 trades: carpenters at 50%, construction laborers at 50%. Weighted together, Rapid City wages are 0.89 times the national level. Labor makes up about 21% of the midpoint estimate (22% at national prices).
Materials are scaled with BEA's regional price parity for goods. Rapid City is at 95.5 against 100 for the US, so a materials line of $5,250 nationally becomes $5,000 here (midpoint, 150 linear ft). Permits follow the all-items index of 89.2: $35 to $130.
Who does the work: Rapid City trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Rapid City the blend is 0.89.
Carpenters (47-2031), 50% of the weighting: a median of $23.39 an hour, 20% below the US median of $29.12. The middle half of them earn between $21.34 and $28.88 an hour. About 870 work in the metro. That is 117.9 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $21.94 an hour, which is 3% below the national $22.66. The middle half of them earn between $19.14 and $22.91 an hour. BLS counts 410 of them working in the area, 55.5 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $140 to the midpoint estimate; the 25th percentile takes off about $55. That is a swing of roughly 0.8% to 2.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Rapid City has 73,820 jobs in total (BLS, May 2025), ranking 249th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $21.34 | $23.39 | $28.88 | $29.12 | 0.80 | metro |
| Construction laborers (47-2061) | 50% | $19.14 | $21.94 | $22.91 | $22.66 | 0.97 | metro |
| Blended | 100% | 0.89 | |||||
Rapid City against nearby metros and the rest of South Dakota
Of the five closest metros, none is cheaper than Rapid City. Sioux Falls comes closest at about $6,450.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Rapid City, SDthis page | $4,300 – $8,550 | $6,450 | |
| Bismarck, ND210 miles | $4,350 – $8,800 | $6,600 | +2% |
| Cheyenne, WY220 miles | $4,350 – $8,750 | $6,550 | +2% |
| Greeley, CO260 miles | $4,350 – $8,800 | $6,600 | +3% |
| Fort Collins, CO275 miles | $4,400 – $8,850 | $6,600 | +3% |
| Sioux Falls, SD305 miles | $4,300 – $8,600 | $6,450 | level |
| South Dakota (statewide) | $4,300 – $8,550 | $6,400 | level |
| United States | $4,550 – $9,150 | $6,850 | +7% |
Out of the 300 metros we cover, Rapid City ranks #220 for the cost of this job (#1 is the most expensive). Statewide, Rapid City is 0% above the South Dakota figure.
Elsewhere in South Dakota
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Sioux Falls, SD | 178,590 jobs | $4,300 – $8,600 | $6,450 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Rapid City against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Blacksburg, VA | 74,070 jobs | $4,300 – $8,550 | $6,400 | level |
| Kahului, HI | 73,750 jobs | $5,350 – $11,100 | $8,250 | +28% |
| Sioux City, IA | 75,010 jobs | $4,250 – $8,600 | $6,400 | level |
| Bloomington, IN | 73,240 jobs | $4,350 – $8,800 | $6,600 | +2% |
Pick a size, pick a tier: vinyl fence pricing in Rapid City
The cited range is split into basic, standard and premium bands, then scaled to Rapid City. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,300 to $6,000
4-ft picket or ranch rail
Standard
$5,550 to $7,300
6-ft privacy fence, standard white
Premium
$6,850 to $8,550
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,850 – $4,000 | $3,750 – $4,900 | $4,600 – $5,750 |
| 150 ft (150 linear ft) | $4,300 – $6,000 | $5,550 – $7,300 | $6,850 – $8,550 |
| 200 ft (200 linear ft) | $5,700 – $7,950 | $7,400 – $9,700 | $9,100 – $11,400 |
| full lot (300 linear ft) | $8,500 – $11,900 | $11,100 – $14,500 | $13,600 – $17,000 |
Planning more than one job in Rapid City?
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Rapid City wage and price inputs. Compared with national midpoints, concrete slab comes out highest (−7%) and wood fence lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,750 – $7,050 | −8% |
| Chain-link fence | 150 linear ft | $1,450 – $5,650 | −8% |
| Aluminum fence | 150 linear ft | $3,450 – $10,500 | −8% |
| Concrete slab | 400 sq ft | $2,250 – $4,800 | −7% |
The best months for vinyl fence in Rapid City
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Rapid City Wfo (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Rapid City are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Rapid City gets about 20 inches of precipitation in a normal year, including roughly 54 inches of snow. The wettest months are May, June and July (4.1 inches in May). Inside the workable window, March and November are the driest, at 0.9 and 0.5 inches. The station averages about 24 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 37 | 16 | 0.3 | Cold |
| Feb | 38 | 18 | 0.5 | Cold |
| Mar | 47 | 26 | 0.9 | Workable |
| Apr | 55 | 34 | 2.3 | Workable |
| May | 65 | 45 | 4.1 | Workable |
| Jun | 76 | 55 | 3.3 | Workable |
| Jul | 84 | 62 | 2.6 | Workable |
| Aug | 83 | 60 | 2.2 | Workable |
| Sep | 74 | 51 | 1.4 | Workable |
| Oct | 59 | 38 | 1.5 | Workable |
| Nov | 47 | 27 | 0.5 | Workable |
| Dec | 38 | 19 | 0.4 | Cold |
Specs and site conditions that change a Rapid City bid
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Add-ons priced for Rapid City
Add-ons start from national price ranges and are scaled by 0.92 for Rapid City, which is the average of the area's wage index (0.89) and goods price index (0.95). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $720 |
| Remove old fence | $1,400 – $2,750 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,550 to $7,300 for Rapid City, SD is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Rapid City, SD: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Rapid City: your questions
+How much does it cost to install a vinyl fence in Rapid City?
For 150 linear ft, expect $4,300 to $8,550 in the Rapid City area. A standard-spec job lands at $5,550 to $7,300. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Rapid City?
About $28.50 to $56 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Rapid City or Bismarck?
Bismarck is 210 miles away. The midpoint for 150 linear ft there is $6,600, which is 2% more than Rapid City ($6,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Rapid City?
About 21% at the midpoint, or $1,350 out of $6,450. Materials are 78% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Rapid City?
$5,700 to $11,400. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Rapid City?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the Rapid City area (our national range of $40 to $150 scaled by the local price level).
+Is Rapid City expensive for vinyl fence compared with the rest of South Dakota?
Rapid City is 0% above the South Dakota statewide estimate ($6,400 at the midpoint). We cover 2 metros in South Dakota; see the state page to compare them.
+What do carpenters earn in Rapid City?
The BLS median is $23.39 an hour in the Rapid City area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.34 to $28.88.
+What do basic and premium vinyl fence work cost in Rapid City?
For 150 linear ft, basic work runs $4,300 to $6,000 and premium work $6,850 to $8,550. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Rapid City?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Rapid City?
$140 to $720, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Rapid City
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.