Tile flooring cost in Lexington Park, MD
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (200 sq ft)
- $2,100 – $9,500
- Per sq ft
- $10.50 – $47.50
- before permit
- Versus US midpoint
- −7%
- US $6,200
- Rank of 300 metros
- #162
- 1 = most expensive
Local price for a tile floor in the Lexington Park area: $2,100 to $9,500 for 200 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 7% lower than the US figure. Tile and stone setters earn a median of $21.96 an hour in the Lexington Park area, 18% below the US median of $26.77.
Estimate your tile flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 200 sq ft in Lexington Park, MD, standard level
$4,300 to $7,300
About $21.50 to $36.50 per sq ft before permits. Labor is about 36% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,350 | $5,000 |
| Labor | $1,950 | $2,250 |
| Permits and fees | $0 | $0 |
| Total | $4,300 | $7,300 |
Cost breakdown for 200 sq ft in Lexington Park, MD
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $400 | $3,700 | $7,000 | 64% |
| Labor | $1,700 | $2,100 | $2,550 | 36% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $2,100 | $5,800 | $9,500 | 100% |
Where the Lexington Park price comes from
Labor is 36% of the midpoint bill here, against 40% nationally. The mix of trades behind this job is tile and stone setters (85%), construction laborers (15%). We weight each trade's local median wage by that share and compare it with the national median. In Lexington Park the blended ratio comes out at 0.84. BLS does not publish this trade for the metro, so we used the Maryland statewide median.
Materials are scaled with BEA's regional price parity for goods. Lexington Park is at 99.7 against 100 for the US, so a materials line of $3,700 nationally becomes $3,700 here (midpoint, 200 sq ft). Permits follow the all-items index of 100.8: $0 to $0.
Data note: 85% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Lexington Park. The wage table below marks each row.
Lexington Park: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Lexington Park. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from bathroom (50 sq ft) to main floor (400 sq ft).
Basic
$2,100 to $5,050
Basic ceramic or vinyl tile, simple square layout
Standard
$4,300 to $7,300
Porcelain tile, standard layout
Premium
$6,550 to $9,500
Large-format, natural stone or patterned layouts
| Size | Basic | Standard | Premium |
|---|---|---|---|
| bathroom (50 sq ft) | $520 – $1,250 | $1,100 – $1,800 | $1,650 – $2,400 |
| kitchen (150 sq ft) | $1,550 – $3,800 | $3,250 – $5,450 | $4,900 – $7,150 |
| main floor (400 sq ft) | $4,150 – $10,100 | $8,600 – $14,600 | $13,100 – $19,000 |
Who does the work: Lexington Park trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Lexington Park the blend is 0.84.
Tile and stone setters (47-2044) carry 85% of the labor weighting. BLS does not publish this trade for the Lexington Park metro, so we used the Maryland statewide median: $21.96 an hour against $26.77 for the US. The middle half of them earn between $18.57 and $25.00 an hour.
For construction laborers (47-2061, weighted 15%) the local median is $21.88 an hour, which is 3% below the national $22.66. The middle half of them earn between $18.05 and $23.85 an hour. BLS counts 450 of them working in the area, 63.7 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (tile and stone setters) from the median to the 75th percentile wage adds about $240 to the midpoint estimate; the 25th percentile takes off about $270. That is a swing of roughly 4.6% to 4.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Lexington Park has 70,650 jobs in total (BLS, May 2025), ranking 259th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Tile and stone setters (47-2044) | 85% | $18.57 | $21.96 | $25.00 | $26.77 | 0.82 | state |
| Construction laborers (47-2061) | 15% | $18.05 | $21.88 | $23.85 | $22.66 | 0.97 | metro |
| Blended | 100% | 0.84 | |||||
Is Lexington Park cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 200 sq ft range from $5,600 to $6,150 across Lexington Park and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Lexington Park, MDthis page | $2,100 – $9,500 | $5,800 | |
| Washington, DC65 miles | $2,200 – $10,000 | $6,150 | +6% |
| Baltimore, MD70 miles | $2,100 – $9,700 | $5,900 | +2% |
| Dover, DE75 miles | $2,400 – $9,750 | $6,050 | +5% |
| Richmond, VA80 miles | $2,200 – $9,450 | $5,850 | +1% |
| Virginia Beach, VA100 miles | $2,000 – $9,200 | $5,600 | −3% |
| Maryland (statewide) | $2,100 – $9,700 | $5,900 | +2% |
| United States | $2,400 – $10,000 | $6,200 | +7% |
Out of the 300 metros we cover, Lexington Park ranks #162 for the cost of this job (#1 is the most expensive). Statewide, Lexington Park is 2% below the Maryland figure.
Elsewhere in Maryland
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Baltimore, MD | 1,356,680 jobs | $2,100 – $9,700 | $5,900 | +2% |
| Hagerstown, MD | 107,170 jobs | $2,050 – $9,250 | $5,650 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Lexington Park against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bismarck, ND | 71,270 jobs | $2,000 – $9,150 | $5,550 | −4% |
| Janesville, WI | 69,870 jobs | $2,650 – $9,950 | $6,300 | +9% |
| Redding, CA | 71,550 jobs | $2,300 – $10,200 | $6,200 | +7% |
| Wausau, WI | 69,530 jobs | $2,600 – $9,950 | $6,300 | +8% |
What nearby projects cost in Lexington Park
Jobs that often go together with tile floor are priced below at their usual sizes, using the same Lexington Park wage and price inputs. Compared with national midpoints, hardwood flooring comes out highest (−1%) and shower pan lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $5,450 – $12,400 | −1% |
| Laminate flooring | 500 sq ft | $1,900 – $6,700 | −5% |
| Bathroom remodel | 45 sq ft | $4,550 – $22,400 | −4% |
| Shower pan | 1 pan | $830 – $2,600 | −8% |
Why two Lexington Park quotes can differ
Tile alone
Tile costs $2-$35 per sq ft before installation, which is what makes the range so wide.
Subfloor
Uneven or damaged subfloors need prep work before the tile goes down.
Tile type
Porcelain runs $15-$50 per sq ft installed. Luxury vinyl tile is $4-$16 (HomeGuide).
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,300 to $7,300 for Lexington Park, MD is attached.
Detailed tile flooring report for Lexington Park, MD, $9
The report lays out the tile flooring numbers for Lexington Park, MD line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Tile flooring in Lexington Park: your questions
+How much does it cost to install a tile floor in Lexington Park?
For 200 sq ft, expect $2,100 to $9,500 in the Lexington Park area. A standard-spec job lands at $4,300 to $7,300. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for tile floor in Lexington Park?
About $10.50 to $47.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $12 to $50.
+Is tile floor cheaper in Lexington Park or Washington?
Washington is 65 miles away. The midpoint for 200 sq ft there is $6,150, which is 6% more than Lexington Park ($5,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Lexington Park?
About 36% at the midpoint, or $2,100 out of $5,800. Materials are 64% and permits 0%. Nationally, labor is 40%.
+What would kitchen (150 sq ft) cost in Lexington Park?
$1,550 to $7,150. Pick a different size in the estimator above to get your own number.
+Does tile floor need a permit in Lexington Park?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Lexington Park area (our national range of $0 to $0 scaled by the local price level).
+Is Lexington Park expensive for tile floor compared with the rest of Maryland?
Lexington Park is 2% below the Maryland statewide estimate ($5,900 at the midpoint). We cover 3 metros in Maryland; see the state page to compare them.
+What do tile and stone setters earn in Lexington Park?
BLS has no published metro figure here, so we use the statewide median of $21.96 an hour, compared with $26.77 nationally. The 25th to 75th percentile range is $18.57 to $25.00.
+What do basic and premium tile floor work cost in Lexington Park?
For 200 sq ft, basic work runs $2,100 to $5,050 and premium work $6,550 to $9,500. Basic means: basic ceramic or vinyl tile, simple square layout. Premium means: large-format, natural stone or patterned layouts.
Tile flooring near Lexington Park
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.