Tile flooring cost in Santa Maria, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (200 sq ft)
- $2,550 – $10,600
- Per sq ft
- $13 – $53
- before permit
- Versus US midpoint
- +6%
- US $6,200
- Rank of 300 metros
- #54
- 1 = most expensive
Local price for a tile floor in the Santa Maria area: $2,550 to $10,600 for 200 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% higher than the US figure. Building materials run about 5% above the US average here (BEA goods price index 105.2).
Estimate your tile flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 200 sq ft in Santa Maria, CA, standard level
$4,950 to $8,200
About $25 to $41 per sq ft before permits. Labor is about 41% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $5,300 |
| Labor | $2,450 | $2,900 |
| Permits and fees | $0 | $0 |
| Total | $4,950 | $8,200 |
Cost breakdown for 200 sq ft in Santa Maria, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $420 | $3,900 | $7,350 | 59% |
| Labor | $2,150 | $2,700 | $3,200 | 41% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $2,550 | $6,600 | $10,600 | 100% |
Where the Santa Maria price comes from
We price the labor side from BLS wage data for 2 trades: tile and stone setters at 85%, construction laborers at 15%. Weighted together, Santa Maria wages are 1.07 times the national level. Labor makes up about 41% of the midpoint estimate (40% at national prices).
Materials are scaled with BEA's regional price parity for goods. Santa Maria is at 105.2 against 100 for the US, so a materials line of $3,700 nationally becomes $3,900 here (midpoint, 200 sq ft). Permits follow the all-items index of 108.8: $0 to $0.
Is Santa Maria cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 200 sq ft range from $6,400 to $7,000 across Santa Maria and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Santa Maria, CAthis page | $2,550 – $10,600 | $6,600 | |
| Oxnard, CA55 miles | $2,500 – $10,500 | $6,500 | −1% |
| San Luis Obispo, CA65 miles | $2,400 – $10,300 | $6,400 | −3% |
| Bakersfield, CA95 miles | $2,550 – $10,600 | $6,600 | level |
| Los Angeles, CA110 miles | $2,600 – $10,700 | $6,650 | +1% |
| Visalia, CA135 miles | $2,900 – $11,100 | $7,000 | +6% |
| California (statewide) | $2,600 – $10,700 | $6,650 | +1% |
| United States | $2,400 – $10,000 | $6,200 | −6% |
Out of the 300 metros we cover, Santa Maria ranks #54 for the cost of this job (#1 is the most expensive). Statewide, Santa Maria is 1% below the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $2,600 – $10,700 | $6,650 | +1% |
| San Francisco, CA | 2,373,920 jobs | $2,850 – $11,200 | $7,050 | +7% |
| Riverside, CA | 1,716,760 jobs | $2,450 – $10,200 | $6,300 | −4% |
| San Diego, CA | 1,538,060 jobs | $2,550 – $10,800 | $6,650 | +1% |
| San Jose, CA | 1,134,970 jobs | $2,750 – $10,900 | $6,800 | +4% |
| Sacramento, CA | 1,080,590 jobs | $2,500 – $10,500 | $6,500 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Santa Maria against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Springfield, MA | 201,240 jobs | $2,850 – $10,500 | $6,650 | +1% |
| Manchester, NH | 199,560 jobs | $2,200 – $9,600 | $5,900 | −10% |
| Santa Rosa, CA | 205,260 jobs | $2,600 – $10,600 | $6,600 | level |
| Savannah, GA | 198,360 jobs | $2,100 – $9,300 | $5,700 | −14% |
What nearby projects cost in Santa Maria
Jobs that often go together with tile floor are priced below at their usual sizes, using the same Santa Maria wage and price inputs. Compared with national midpoints, hardwood flooring comes out highest (+11%) and shower pan lowest (+3%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $6,150 – $13,900 | +11% |
| Laminate flooring | 500 sq ft | $2,250 – $7,750 | +11% |
| Bathroom remodel | 45 sq ft | $5,050 – $25,000 | +7% |
| Shower pan | 1 pan | $940 – $2,900 | +3% |
Who does the work: Santa Maria trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Santa Maria the blend is 1.07.
Tile and stone setters (47-2044), 85% of the weighting: a median of $28.21 an hour, 5% above the US median of $26.77. The middle half of them earn between $22.86 and $35.34 an hour. About 160 work in the metro. That is 8.0 per 10,000 jobs, compared with 2.3 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 15%) the local median is $26.99 an hour, which is 19% above the national $22.66. The middle half of them earn between $22.80 and $32.79 an hour. BLS counts 1,150 of them working in the area, 57.3 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (tile and stone setters) from the median to the 75th percentile wage adds about $570 to the midpoint estimate; the 25th percentile takes off about $420. That is a swing of roughly 6.5% to 8.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Santa Maria-Santa Barbara has 200,760 jobs in total (BLS, May 2025), ranking 114th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Tile and stone setters (47-2044) | 85% | $22.86 | $28.21 | $35.34 | $26.77 | 1.05 | metro |
| Construction laborers (47-2061) | 15% | $22.80 | $26.99 | $32.79 | $22.66 | 1.19 | metro |
| Blended | 100% | 1.07 | |||||
Cost by quality level and size in Santa Maria
The cited range is split into basic, standard and premium bands, then scaled to Santa Maria. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from bathroom (50 sq ft) to main floor (400 sq ft).
Basic
$2,550 to $5,800
Basic ceramic or vinyl tile, simple square layout
Standard
$4,950 to $8,200
Porcelain tile, standard layout
Premium
$7,400 to $10,600
Large-format, natural stone or patterned layouts
| Size | Basic | Standard | Premium |
|---|---|---|---|
| bathroom (50 sq ft) | $640 – $1,450 | $1,250 – $2,050 | $1,850 – $2,650 |
| kitchen (150 sq ft) | $1,950 – $4,350 | $3,750 – $6,150 | $5,550 – $7,950 |
| main floor (400 sq ft) | $5,150 – $11,600 | $9,950 – $16,400 | $14,800 – $21,200 |
Tile flooring: what moves the price in Santa Maria
Subfloor
Uneven or damaged subfloors need prep work before the tile goes down.
Tile type
Porcelain runs $15-$50 per sq ft installed. Luxury vinyl tile is $4-$16 (HomeGuide).
Labor
Labor starts around $5 per sq ft for the simplest jobs and tops $20 for patterns or premium tile.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,950 to $8,200 for Santa Maria, CA is attached.
Detailed tile flooring report for Santa Maria, CA, $9
The report lays out the tile flooring numbers for Santa Maria, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Tile flooring in Santa Maria: your questions
+How much does it cost to install a tile floor in Santa Maria?
For 200 sq ft, expect $2,550 to $10,600 in the Santa Maria area. A standard-spec job lands at $4,950 to $8,200. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for tile floor in Santa Maria?
About $13 to $53 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $12 to $50.
+Is tile floor cheaper in Santa Maria or Oxnard?
Oxnard is 55 miles away. The midpoint for 200 sq ft there is $6,500, which is 1% less than Santa Maria ($6,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Santa Maria?
About 41% at the midpoint, or $2,700 out of $6,600. Materials are 59% and permits 0%. Nationally, labor is 40%.
+What would kitchen (150 sq ft) cost in Santa Maria?
$1,950 to $7,950. Pick a different size in the estimator above to get your own number.
+Does tile floor need a permit in Santa Maria?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Santa Maria area (our national range of $0 to $0 scaled by the local price level).
+Is Santa Maria expensive for tile floor compared with the rest of California?
Santa Maria is 1% below the California statewide estimate ($6,650 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do tile and stone setters earn in Santa Maria?
The BLS median is $28.21 an hour in the Santa Maria area, compared with $26.77 nationally. The 25th to 75th percentile range is $22.86 to $35.34.
+What do basic and premium tile floor work cost in Santa Maria?
For 200 sq ft, basic work runs $2,550 to $5,800 and premium work $7,400 to $10,600. Basic means: basic ceramic or vinyl tile, simple square layout. Premium means: large-format, natural stone or patterned layouts.
Tile flooring near Santa Maria
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.