Tile flooring cost in Auburn, AL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (200 sq ft)
- $2,000 – $9,150
- Per sq ft
- $9.90 – $45.50
- before permit
- Versus US midpoint
- −10%
- US $6,200
- Rank of 300 metros
- #259
- 1 = most expensive
Local price for a tile floor in the Auburn area: $2,000 to $9,150 for 200 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 10% lower than the US figure. Tile and stone setters earn a median of $21.54 an hour in the Auburn area, 20% below the US median of $26.77.
Estimate your tile flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 200 sq ft in Auburn, AL, standard level
$4,150 to $7,000
About $20.50 to $35 per sq ft before permits. Labor is about 36% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,300 | $4,850 |
| Labor | $1,850 | $2,150 |
| Permits and fees | $0 | $0 |
| Total | $4,150 | $7,000 |
Cost breakdown for 200 sq ft in Auburn, AL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $390 | $3,550 | $6,750 | 64% |
| Labor | $1,600 | $2,000 | $2,400 | 36% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $2,000 | $5,550 | $9,150 | 100% |
Where the Auburn price comes from
The wage side of the estimate leans on tile and stone setters, who do 85% of the hours on a typical job. Their local median is $21.54 an hour. Add the other trades involved and the blended wage index for Auburn is 0.80 (US = 1.00), which puts labor at 36% of the total. BLS does not publish this trade for the metro, so we used the Alabama statewide median.
Materials are scaled with BEA's regional price parity for goods. Auburn is at 96.4 against 100 for the US, so a materials line of $3,700 nationally becomes $3,550 here (midpoint, 200 sq ft). Permits follow the all-items index of 87.9: $0 to $0.
Data note: 85% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Auburn. The wage table below marks each row.
Pick a size, pick a tier: tile flooring pricing in Auburn
The cited range is split into basic, standard and premium bands, then scaled to Auburn. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from bathroom (50 sq ft) to main floor (400 sq ft).
Basic
$2,000 to $4,850
Basic ceramic or vinyl tile, simple square layout
Standard
$4,150 to $7,000
Porcelain tile, standard layout
Premium
$6,300 to $9,150
Large-format, natural stone or patterned layouts
| Size | Basic | Standard | Premium |
|---|---|---|---|
| bathroom (50 sq ft) | $500 – $1,200 | $1,050 – $1,750 | $1,550 – $2,300 |
| kitchen (150 sq ft) | $1,500 – $3,650 | $3,100 – $5,250 | $4,700 – $6,850 |
| main floor (400 sq ft) | $3,950 – $9,700 | $8,250 – $14,000 | $12,600 – $18,300 |
Tile flooring: what moves the price in Auburn
Tile alone
Tile costs $2-$35 per sq ft before installation, which is what makes the range so wide.
Subfloor
Uneven or damaged subfloors need prep work before the tile goes down.
Tile type
Porcelain runs $15-$50 per sq ft installed. Luxury vinyl tile is $4-$16 (HomeGuide).
Who does the work: Auburn trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Auburn the blend is 0.80.
Tile and stone setters (47-2044) carry 85% of the labor weighting. BLS does not publish this trade for the Auburn metro, so we used the Alabama statewide median: $21.54 an hour against $26.77 for the US. The middle half of them earn between $17.91 and $22.86 an hour.
For construction laborers (47-2061, weighted 15%) the local median is $17.36 an hour, which is 23% below the national $22.66. The middle half of them earn between $13.70 and $21.30 an hour. BLS counts 670 of them working in the area, 92.1 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (tile and stone setters) from the median to the 75th percentile wage adds about $100 to the midpoint estimate; the 25th percentile takes off about $290. That is a swing of roughly 5.2% to 1.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Auburn-Opelika has 72,710 jobs in total (BLS, May 2025), ranking 252nd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Tile and stone setters (47-2044) | 85% | $17.91 | $21.54 | $22.86 | $26.77 | 0.80 | state |
| Construction laborers (47-2061) | 15% | $13.70 | $17.36 | $21.30 | $22.66 | 0.77 | metro |
| Blended | 100% | 0.80 | |||||
Is Auburn cheap or dear? The local comparison
Of the five closest metros, 1 is cheaper than Auburn. Dothan is the lowest at about $5,550 (midpoint, 200 sq ft), 85 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Auburn, ALthis page | $2,000 – $9,150 | $5,550 | |
| Columbus, GA40 miles | $2,050 – $9,300 | $5,700 | +2% |
| Montgomery, AL50 miles | $2,000 – $9,150 | $5,550 | level |
| Dothan, AL85 miles | $1,950 – $9,100 | $5,550 | −1% |
| Birmingham, AL100 miles | $2,000 – $9,200 | $5,600 | +1% |
| Albany, GA100 miles | $2,050 – $9,250 | $5,650 | +2% |
| Alabama (statewide) | $2,000 – $9,150 | $5,550 | level |
| United States | $2,400 – $10,000 | $6,200 | +11% |
Out of the 300 metros we cover, Auburn ranks #259 for the cost of this job (#1 is the most expensive). Statewide, Auburn is 0% below the Alabama figure.
Elsewhere in Alabama
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Birmingham, AL | 520,290 jobs | $2,000 – $9,200 | $5,600 | +1% |
| Huntsville, AL | 266,650 jobs | $2,050 – $9,250 | $5,650 | +1% |
| Mobile, AL | 172,550 jobs | $2,000 – $9,150 | $5,550 | level |
| Montgomery, AL | 165,550 jobs | $2,000 – $9,150 | $5,550 | level |
| Tuscaloosa, AL | 108,460 jobs | $2,000 – $9,150 | $5,550 | level |
| Daphne, AL | 87,120 jobs | $2,000 – $9,150 | $5,600 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Auburn against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bloomington, IN | 73,240 jobs | $2,150 – $9,300 | $5,750 | +3% |
| Prescott Valley, AZ | 72,300 jobs | $2,250 – $9,550 | $5,900 | +6% |
| Kahului, HI | 73,750 jobs | $2,900 – $11,500 | $7,200 | +30% |
| Coeur d'Alene, ID | 72,280 jobs | $2,150 – $9,400 | $5,800 | +4% |
What nearby projects cost in Auburn
Jobs that often go together with tile floor are priced below at their usual sizes, using the same Auburn wage and price inputs. Compared with national midpoints, hardwood flooring comes out highest (−12%) and laminate flooring lowest (−18%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $4,800 – $11,000 | −12% |
| Laminate flooring | 500 sq ft | $1,550 – $5,800 | −18% |
| Bathroom remodel | 45 sq ft | $4,100 – $20,400 | −12% |
| Shower pan | 1 pan | $780 – $2,450 | −14% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,150 to $7,000 for Auburn, AL is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Auburn, AL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Tile flooring in Auburn: your questions
+How much does it cost to install a tile floor in Auburn?
For 200 sq ft, expect $2,000 to $9,150 in the Auburn area. A standard-spec job lands at $4,150 to $7,000. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for tile floor in Auburn?
About $9.90 to $45.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $12 to $50.
+Is tile floor cheaper in Auburn or Columbus?
Columbus is 40 miles away. The midpoint for 200 sq ft there is $5,700, which is 2% more than Auburn ($5,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Auburn?
About 36% at the midpoint, or $2,000 out of $5,550. Materials are 64% and permits 0%. Nationally, labor is 40%.
+What would kitchen (150 sq ft) cost in Auburn?
$1,500 to $6,850. Pick a different size in the estimator above to get your own number.
+Does tile floor need a permit in Auburn?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Auburn area (our national range of $0 to $0 scaled by the local price level).
+Is Auburn expensive for tile floor compared with the rest of Alabama?
Auburn is 0% below the Alabama statewide estimate ($5,550 at the midpoint). We cover 9 metros in Alabama; see the state page to compare them.
+What do tile and stone setters earn in Auburn?
BLS has no published metro figure here, so we use the statewide median of $21.54 an hour, compared with $26.77 nationally. The 25th to 75th percentile range is $17.91 to $22.86.
+What do basic and premium tile floor work cost in Auburn?
For 200 sq ft, basic work runs $2,000 to $4,850 and premium work $6,300 to $9,150. Basic means: basic ceramic or vinyl tile, simple square layout. Premium means: large-format, natural stone or patterned layouts.
Tile flooring near Auburn
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.