Storm door cost in Santa Fe, NM
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $340 – $910
- Per door
- $337 – $913
- before permit
- Versus US midpoint
- −4%
- US $650
- Rank of 300 metros
- #137
- 1 = most expensive
Santa Fe homeowners pay roughly $340 to $910 to install a storm door at 1 door, or $337 to $913 per door (permit not included). Against the US midpoint, Santa Fe is 4% lower. Building materials run about 4% below the US average here (BEA goods price index 96.1).
Estimate your storm door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Santa Fe, NM, standard level
$510 to $740
About $510 to $740 per door before permits. Labor is about 40% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $290 | $450 |
| Labor | $220 | $290 |
| Permits and fees | $0 | $0 |
| Total | $510 | $740 |
Cost breakdown for 1 door in Santa Fe, NM
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $170 | $370 | $580 | 60% |
| Labor | $170 | $250 | $340 | 40% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $340 | $630 | $910 | 100% |
What is behind the Santa Fe number
We price the labor side from BLS wage data for 2 trades: carpenters at 80%, general maintenance and repair workers at 20%. Weighted together, Santa Fe wages are 0.96 times the national level. Labor makes up about 40% of the midpoint estimate (40% at national prices).
On the materials line, the BEA goods price index for the Santa Fe metro is 96.1 (US = 100). The midpoint materials bill for 1 door comes to $370, compared with $390 at national prices. Permit and inspection fees are scaled by the broader index (98.8) and land at $0 to $0.
Pick a size, pick a tier: storm door pricing in Santa Fe
Three bands are cut from the same cited range and localized for Santa Fe wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 2 common sizes.
Basic
$340 to $570
Basic mid-view door with a standard screen
Standard
$510 to $740
Full-view door with a self-storing screen
Premium
$680 to $910
Low-E full-view or ventilating door
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one storm door | $340 – $570 | $510 – $740 | $680 – $910 |
| front and back doors | $670 – $1,150 | $1,000 – $1,500 | $1,350 – $1,850 |
Related projects, priced for Santa Fe
Because every project leans on different trades, Santa Fe's wage level does not move all prices equally. Against the US midpoint, front door runs −4% and window replacement −6%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Front door | 1 door | $480 – $2,400 | −4% |
| Patio door | 1 door | $570 – $5,650 | −6% |
| Garage door | 1 door | $670 – $3,550 | −4% |
| Window replacement | 10 windows | $4,200 – $14,200 | −6% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Santa Fe is 0.96 times the national level.
For carpenters (47-2031, weighted 80%) the local median is $28.57 an hour, which is in line with the national $29.12. The middle half of them earn between $23.73 and $29.66 an hour. BLS counts 210 of them working in the area, 34.0 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
General maintenance and repair workers (49-9071), 20% of the weighting: a median of $21.08 an hour, 12% below the US median of $23.84. The middle half of them earn between $17.90 and $24.63 an hour. About 690 work in the metro. That is 111.7 per 10,000 jobs, compared with 98.4 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($29.66 an hour) instead of the median, the labor line grows by about $10. At the 25th percentile ($23.73) it shrinks by about $35. The total moves by 1.3% or 5.6%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 61,770 jobs in the Santa Fe area. That makes it the 282nd largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 80% | $23.73 | $28.57 | $29.66 | $29.12 | 0.98 | metro |
| General maintenance and repair workers (49-9071) | 20% | $17.90 | $21.08 | $24.63 | $23.84 | 0.88 | metro |
| Blended | 100% | 0.96 | |||||
Storm door: what moves the price in Santa Fe
Permit
No permit fee is included in this estimate; storm doors rarely need one.
Door style
A mid-view door is $350-$700 installed, a full-view door $425-$950, and a low-E full-view door $475-$1,000 (HomeGuide).
Replacing versus new
Replacing an old storm door runs $400-$1,050 because the old door has to come off.
Santa Fe against nearby metros and the rest of New Mexico
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 door range from $580 to $630 across Santa Fe and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Santa Fe, NMthis page | $340 – $910 | $630 | |
| Albuquerque, NM40 miles | $340 – $920 | $630 | +1% |
| Pueblo, CO200 miles | $330 – $910 | $620 | −1% |
| Las Cruces, NM225 miles | $330 – $900 | $620 | −2% |
| Amarillo, TX230 miles | $310 – $850 | $580 | −8% |
| Colorado Springs, CO240 miles | $340 – $910 | $620 | level |
| New Mexico (statewide) | $340 – $920 | $630 | level |
| United States | $350 – $950 | $650 | +4% |
Across 300 US metros, Santa Fe comes in at #137 from the top. The priciest is Honolulu, HI at $820; the cheapest is Brownsville, TX at $530 (midpoints, 1 door). Statewide, Santa Fe is 0% below the New Mexico figure.
Other New Mexico metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Albuquerque, NM | 404,700 jobs | $340 – $920 | $630 | +1% |
| Las Cruces, NM | 80,000 jobs | $330 – $900 | $620 | −2% |
Cities with a workforce like Santa Fe's
Big cities and small ones price differently, so here is Santa Fe against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Pueblo, CO | 61,780 jobs | $330 – $910 | $620 | −1% |
| Decatur, AL | 61,240 jobs | $320 – $880 | $600 | −4% |
| Hattiesburg, MS | 62,230 jobs | $310 – $860 | $580 | −7% |
| Dothan, AL | 60,720 jobs | $300 – $830 | $560 | −10% |
When to schedule storm door in Santa Fe
We use NOAA's 1991-2020 climate normals for Santa Fe 2 (5 miles from the city center). These are 30-year monthly averages, not forecasts.
February through November is the stretch where exterior installation runs into the fewest weather problems in Santa Fe (10 of 12 months). January and December have an average daytime high under 45°F.
In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Santa Fe gets about 13 inches of precipitation in a normal year, including roughly 20 inches of snow. The wettest months are July, August and September (2.3 inches in July). Inside the workable window, February and April are the driest, at 0.5 and 0.6 inches. The station averages about 24 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 43 | 18 | 0.6 | Cold |
| Feb | 48 | 21 | 0.5 | Workable |
| Mar | 57 | 26 | 0.7 | Workable |
| Apr | 64 | 32 | 0.6 | Workable |
| May | 74 | 41 | 0.9 | Workable |
| Jun | 84 | 50 | 0.9 | Workable |
| Jul | 86 | 55 | 2.3 | Workable |
| Aug | 83 | 54 | 2.0 | Workable |
| Sep | 78 | 47 | 1.4 | Workable |
| Oct | 66 | 35 | 1.3 | Workable |
| Nov | 53 | 24 | 0.8 | Workable |
| Dec | 43 | 18 | 0.8 | Cold |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $510 to $740 for Santa Fe, NM is attached.
Detailed storm door report for Santa Fe, NM, $9
Multi-page report for Santa Fe, NM: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Storm door in Santa Fe: your questions
+How much does it cost to install a storm door in Santa Fe?
For 1 door, expect $340 to $910 in the Santa Fe area. A standard-spec job lands at $510 to $740. Small jobs usually cost more per door and large ones less.
+What is the price per door for storm door in Santa Fe?
About $337 to $913 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $350 to $950.
+Is storm door cheaper in Santa Fe or Albuquerque?
Albuquerque is 40 miles away. The midpoint for 1 door there is $630, which is 1% more than Santa Fe ($630). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Santa Fe?
About 40% at the midpoint, or $250 out of $630. Materials are 60% and permits 0%. Nationally, labor is 40%.
+What would front and back doors cost in Santa Fe?
$670 to $1,850. Pick a different size in the estimator above to get your own number.
+Does storm door need a permit in Santa Fe?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Santa Fe area (our national range of $0 to $0 scaled by the local price level).
+Is Santa Fe expensive for storm door compared with the rest of New Mexico?
Santa Fe is 0% below the New Mexico statewide estimate ($630 at the midpoint). We cover 3 metros in New Mexico; see the state page to compare them.
+What do carpenters earn in Santa Fe?
The BLS median is $28.57 an hour in the Santa Fe area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.73 to $29.66.
+What do basic and premium storm door work cost in Santa Fe?
For 1 door, basic work runs $340 to $570 and premium work $680 to $910. Basic means: basic mid-view door with a standard screen. Premium means: low-E full-view or ventilating door.
+When is the best time to install a storm door in Santa Fe?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through November. February and April are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Storm door near Santa Fe
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Storm Door Installation Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are HomeGuide's door-alone price ($175-$600). Labor is the remainder, which matches its $175-$350 installation figure.