Shower pan cost in Utah
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (1 pan)
- $870 – $2,650
- Per pan
- $841 – $2,169
- before permit
- Versus US midpoint
- −5%
- US $1,850
- Metros covered
- 5
Utah prices for shower pan: $870 to $2,650 for 1 pan, or $841 to $2,169 per pan without the permit. The state midpoint is 5% below the national one. Local wages for plumbers, pipefitters and steamfitters are $29.76 an hour.
Inside Utah, the metros we cover range from $1,700 (St. George) to $1,800 (Salt Lake City) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Utah (statewide), standard level
$1,400 to $2,150
About $1,239 to $1,771 per pan before permits. Labor is about 55% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $380 | $680 |
| Labor | $860 | $1,100 |
| Permits and fees | $170 | $350 |
| Total | $1,400 | $2,150 |
Cost breakdown for 1 pan in Utah
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $530 | $920 | 30% |
| Labor | $700 | $970 | $1,250 | 55% |
| Permits and fees | $30 | $260 | $490 | 15% |
| Total | $870 | $1,750 | $2,650 | 100% |
Basic, standard or premium: Utah prices
Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from one shower pan to one shower pan.
Basic
$870 to $1,600
Pre-made acrylic or fiberglass pan
Standard
$1,400 to $2,150
Tile-ready pan with tile finish
Premium
$1,950 to $2,650
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $870 – $1,600 | $1,400 – $2,150 | $1,950 – $2,650 |
Shower pan cost by metro in Utah
2 of the 5 metros sit above the statewide midpoint of $1,750, and the top-to-bottom gap is 7%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (1 pan) | Midpoint | vs. state |
|---|---|---|---|
| Salt Lake City, UT | $890 – $2,700 | $1,800 | +2% |
| Ogden, UT | $870 – $2,700 | $1,800 | +1% |
| Provo, UT | $880 – $2,650 | $1,750 | level |
| Logan, UT | $860 – $2,650 | $1,750 | −1% |
| St. George, UT | $810 – $2,550 | $1,700 | −5% |
Utah labor market for shower pan
Utah's labor line is priced from 2 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 0.93 times the national level.
Plumbers, pipefitters and steamfitters (47-2152), 50% of the weighting: a median of $29.76 an hour, in line with the US median of $30.67. The middle half of them earn between $23.62 and $37.23 an hour. About 7,030 work in the state. That is 40.5 per 10,000 jobs, compared with 30.0 nationally, which suggests plenty of local crews to bid.
Tile and stone setters (47-2044), 50% of the weighting: a median of $23.72 an hour, 11% below the US median of $26.77. The middle half of them earn between $21.08 and $28.45 an hour. About 1,590 work in the state. That is 9.2 per 10,000 jobs, compared with 2.3 nationally, which suggests plenty of local crews to bid.
A crew paid at the 75th percentile for plumbers, pipefitters and steamfitters ($37.23 an hour) would add about $130 to the statewide midpoint; one at the 25th percentile ($23.62) would take off about $110. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 1,735,590 jobs across Utah (May 2025), which is 1.1% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $23.62 | $29.76 | $37.23 | $30.67 | 0.97 | state |
| Tile and stone setters (47-2044) | 50% | $21.08 | $23.72 | $28.45 | $26.77 | 0.89 | state |
| Blended | 100% | 0.93 | |||||
Utah against its neighbors
Utah ranks 33 of 51 (the 50 states plus DC) for shower pan, where 1 is the most expensive. The costliest is Massachusetts at $2,350 and the cheapest Arkansas at $1,500, both for 1 pan at the midpoint. Utah sits at $1,750. The five states closest by workforce center are listed below.
Why two Utah quotes can differ
Pre-made versus custom
Pre-made trays are $500-$1,550 installed; a custom tile pan is $900-$3,500; a custom stone pan is $1,200-$2,000 or more (HomeGuide).
Extras
Benches, trench drains and curb changes add $100-$600.
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Other Utah jobs that often go with shower pan
Each project weights the trades differently, so Utah's wage level does not push every price by the same amount. Compared with the US midpoint, kitchen remodel is −5% and kitchen cabinets −7%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,400 – $21,900 | −6% |
| Kitchen cabinets | 25 linear ft | $4,000 – $13,000 | −7% |
| Window replacement | 10 windows | $4,250 – $14,200 | −5% |
| Kitchen remodel | 120 sq ft | $17,600 – $30,000 | −5% |
| Kitchen backsplash | 30 sq ft | $280 – $1,400 | −7% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,400 to $2,150 for Utah is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Utah: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Utah: your questions
+How much does it cost to install a shower pan in Utah?
$870 to $2,650 for 1 pan, using statewide wages and prices. Metro areas inside Utah can sit above or below that.
+Which city in Utah is cheapest for shower pan?
St. George at about $1,700 (midpoint, 1 pan). The priciest is Salt Lake City at $1,800.
+Is shower pan cheaper in Utah than the US average?
It is 5% cheaper: $1,750 against $1,850 for 1 pan at the midpoint.
+What share of the price is labor in Utah?
About 55% ($970). Materials are 30%. Statewide labor for this job is weighted 0.93x the national wage level.
+What do plumbers, pipefitters and steamfitters earn in Utah?
The BLS statewide median is $29.76 an hour, against $30.67 for the US. The 25th to 75th percentile range is $23.62 to $37.23.
+Where does Utah rank for shower pan costs?
33rd most expensive of 51 (the 50 states plus DC) at the midpoint, $1,750 for 1 pan. Rank 1 is the costliest.
+What do basic and premium shower pan work cost in Utah?
For 1 pan, basic work runs $870 to $1,600 and premium work $1,950 to $2,650. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan by city in Utah
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.