Shower pan cost in Bloomington, IL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $1,100 – $3,000
- Per pan
- $1,050 – $2,526
- before permit
- Versus US midpoint
- +9%
- US $1,850
- Rank of 300 metros
- #53
- 1 = most expensive
Local price for a shower pan in the Bloomington area: $1,100 to $3,000 for 1 pan. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% higher than the US figure. Plumbers, pipefitters and steamfitters earn a median of $37.36 an hour in the Bloomington area, 22% above the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Bloomington, IL, standard level
$1,650 to $2,400
About $1,493 to $2,083 per pan before permits. Labor is about 63% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $370 | $660 |
| Labor | $1,150 | $1,400 |
| Permits and fees | $160 | $340 |
| Total | $1,650 | $2,400 |
Cost breakdown for 1 pan in Bloomington, IL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $520 | $890 | 25% |
| Labor | $910 | $1,250 | $1,650 | 63% |
| Permits and fees | $30 | $250 | $470 | 12% |
| Total | $1,100 | $2,050 | $3,000 | 100% |
What is behind the Bloomington number
We price the labor side from BLS wage data for 2 trades: plumbers, pipefitters and steamfitters at 50%, tile and stone setters at 50%. Weighted together, Bloomington wages are 1.21 times the national level. Labor makes up about 63% of the midpoint estimate (56% at national prices).
Materials are scaled with BEA's regional price parity for goods. Bloomington is at 93.6 against 100 for the US, so a materials line of $550 nationally becomes $520 here (midpoint, 1 pan). Permits follow the all-items index of 93.5: $30 to $470.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Bloomington. The wage table below marks each row.
Related projects, priced for Bloomington
Jobs that often go together with shower pan are priced below at their usual sizes, using the same Bloomington wage and price inputs. Compared with national midpoints, kitchen cabinets comes out highest (+8%) and kitchen remodel lowest (−1%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $5,000 – $24,900 | +7% |
| Kitchen cabinets | 25 linear ft | $4,350 – $15,400 | +8% |
| Window replacement | 10 windows | $4,550 – $14,800 | −1% |
| Kitchen remodel | 120 sq ft | $18,300 – $31,200 | −1% |
| Kitchen backsplash | 30 sq ft | $320 – $1,550 | +5% |
Cost by quality level and size in Bloomington
The cited range is split into basic, standard and premium bands, then scaled to Bloomington. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one shower pan to one shower pan.
Basic
$1,100 to $1,850
Pre-made acrylic or fiberglass pan
Standard
$1,650 to $2,400
Tile-ready pan with tile finish
Premium
$2,250 to $3,000
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $1,100 – $1,850 | $1,650 – $2,400 | $2,250 – $3,000 |
Specs and site conditions that change a Bloomington bid
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Pre-made versus custom
Pre-made trays are $500-$1,550 installed; a custom tile pan is $900-$3,500; a custom stone pan is $1,200-$2,000 or more (HomeGuide).
How Bloomington compares
Same job, same size (1 pan), priced for the nearest metros. Chicago is the priciest of the group at $2,400. Lafayette is the cheapest at $1,750.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Bloomington, ILthis page | $1,100 – $3,000 | $2,050 | |
| Champaign, IL35 miles | $1,200 – $3,200 | $2,200 | +7% |
| Peoria, IL40 miles | $1,100 – $3,050 | $2,100 | +3% |
| Springfield, IL65 miles | $1,200 – $3,150 | $2,150 | +7% |
| Lafayette, IN95 miles | $860 – $2,600 | $1,750 | −15% |
| Chicago, IL100 miles | $1,300 – $3,550 | $2,400 | +19% |
| Illinois (statewide) | $1,250 – $3,350 | $2,300 | +13% |
| United States | $930 – $2,800 | $1,850 | −8% |
Out of the 300 metros we cover, Bloomington ranks #53 for the cost of this job (#1 is the most expensive). Statewide, Bloomington is 11% below the Illinois figure.
Elsewhere in Illinois
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Chicago, IL | 4,513,280 jobs | $1,300 – $3,550 | $2,400 | +19% |
| Peoria, IL | 166,020 jobs | $1,100 – $3,050 | $2,100 | +3% |
| Rockford, IL | 137,650 jobs | $1,150 – $3,150 | $2,150 | +7% |
| Champaign, IL | 105,500 jobs | $1,200 – $3,200 | $2,200 | +7% |
| Springfield, IL | 100,810 jobs | $1,200 – $3,150 | $2,150 | +7% |
Metros of a similar size
Big cities and small ones price differently, so here is Bloomington against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Florence, SC | 89,060 jobs | $790 – $2,450 | $1,650 | −20% |
| Monroe, LA | 87,500 jobs | $790 – $2,450 | $1,600 | −21% |
| Medford, OR | 89,060 jobs | $990 – $2,950 | $1,950 | −3% |
| Joplin, MO | 87,190 jobs | $950 – $2,750 | $1,850 | −9% |
Who does the work: Bloomington trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Bloomington the blend is 1.21.
Plumbers, pipefitters and steamfitters (47-2152), 50% of the weighting: a median of $37.36 an hour, 22% above the US median of $30.67. The middle half of them earn between $24.14 and $47.25 an hour. About 180 work in the metro. That is 20.4 per 10,000 jobs, compared with 30.0 nationally, so expect fewer local crews to bid.
Tile and stone setters (47-2044) carry 50% of the labor weighting. BLS does not publish this trade for the Bloomington metro, so we used the Illinois statewide median: $32.29 an hour against $26.77 for the US. The middle half of them earn between $23.20 and $44.83 an hour.
A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $170 to the midpoint estimate; the 25th percentile takes off about $230. That is a swing of roughly 11.1% to 8.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Bloomington has 88,110 jobs in total (BLS, May 2025), ranking 222nd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $24.14 | $37.36 | $47.25 | $30.67 | 1.22 | metro |
| Tile and stone setters (47-2044) | 50% | $23.20 | $32.29 | $44.83 | $26.77 | 1.21 | state |
| Blended | 100% | 1.21 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,650 to $2,400 for Bloomington, IL is attached.
Detailed shower pan report for Bloomington, IL, $9
The report lays out the shower pan numbers for Bloomington, IL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Bloomington: your questions
+How much does it cost to install a shower pan in Bloomington?
For 1 pan, expect $1,100 to $3,000 in the Bloomington area. A standard-spec job lands at $1,650 to $2,400. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Bloomington?
About $1,050 to $2,526 per pan for materials and labor, plus $30 to $470 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Bloomington or Champaign?
Champaign is 35 miles away. The midpoint for 1 pan there is $2,200, which is 7% more than Bloomington ($2,050). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Bloomington?
About 63% at the midpoint, or $1,250 out of $2,050. Materials are 25% and permits 12%. Nationally, labor is 56%.
+What would one shower pan cost in Bloomington?
$1,100 to $3,000. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Bloomington?
Often, but rules are set by your city or county building office, so call before you hire. Budget $30 to $470 for fees in the Bloomington area (our national range of $30 to $500 scaled by the local price level).
+Is Bloomington expensive for shower pan compared with the rest of Illinois?
Bloomington is 11% below the Illinois statewide estimate ($2,300 at the midpoint). We cover 6 metros in Illinois; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Bloomington?
The BLS median is $37.36 an hour in the Bloomington area, compared with $30.67 nationally. The 25th to 75th percentile range is $24.14 to $47.25.
+What do basic and premium shower pan work cost in Bloomington?
For 1 pan, basic work runs $1,100 to $1,850 and premium work $2,250 to $3,000. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Bloomington
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.