Shower pan cost in Yuma, AZ
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $870 – $2,650
- Per pan
- $841 – $2,169
- before permit
- Versus US midpoint
- −6%
- US $1,850
- Rank of 300 metros
- #162
- 1 = most expensive
Local price for a shower pan in the Yuma area: $870 to $2,650 for 1 pan. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Plumbers, pipefitters and steamfitters earn a median of $28.36 an hour in the Yuma area, 8% below the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Yuma, AZ, standard level
$1,400 to $2,100
About $1,240 to $1,771 per pan before permits. Labor is about 56% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $380 | $680 |
| Labor | $860 | $1,100 |
| Permits and fees | $160 | $330 |
| Total | $1,400 | $2,100 |
Cost breakdown for 1 pan in Yuma, AZ
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $530 | $910 | 30% |
| Labor | $700 | $980 | $1,250 | 56% |
| Permits and fees | $30 | $250 | $460 | 14% |
| Total | $870 | $1,750 | $2,650 | 100% |
Where the Yuma price comes from
Labor is 56% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is plumbers, pipefitters and steamfitters (50%), tile and stone setters (50%). We weight each trade's local median wage by that share and compare it with the national median. In Yuma the blended ratio comes out at 0.93.
Materials are scaled with BEA's regional price parity for goods. Yuma is at 96.2 against 100 for the US, so a materials line of $550 nationally becomes $530 here (midpoint, 1 pan). Permits follow the all-items index of 92.7: $30 to $460.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Yuma. The wage table below marks each row.
Shower pan: what moves the price in Yuma
Pre-made versus custom
Pre-made trays are $500-$1,550 installed; a custom tile pan is $900-$3,500; a custom stone pan is $1,200-$2,000 or more (HomeGuide).
Extras
Benches, trench drains and curb changes add $100-$600.
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Cost by quality level and size in Yuma
The cited range is split into basic, standard and premium bands, then scaled to Yuma. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one shower pan to one shower pan.
Basic
$870 to $1,550
Pre-made acrylic or fiberglass pan
Standard
$1,400 to $2,100
Tile-ready pan with tile finish
Premium
$1,950 to $2,650
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $870 – $1,550 | $1,400 – $2,100 | $1,950 – $2,650 |
Who does the work: Yuma trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Yuma the blend is 0.93.
Plumbers, pipefitters and steamfitters (47-2152), 50% of the weighting: a median of $28.36 an hour, 8% below the US median of $30.67. The middle half of them earn between $21.75 and $31.97 an hour. About 170 work in the metro. That is 24.7 per 10,000 jobs, compared with 30.0 nationally, so expect fewer local crews to bid.
Tile and stone setters (47-2044) carry 50% of the labor weighting. BLS does not publish this trade for the Yuma metro, so we used the Arizona statewide median: $25.00 an hour against $26.77 for the US. The middle half of them earn between $20.66 and $30.39 an hour.
A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $60 to the midpoint estimate; the 25th percentile takes off about $110. That is a swing of roughly 6.5% to 3.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Yuma has 68,880 jobs in total (BLS, May 2025), ranking 262nd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $21.75 | $28.36 | $31.97 | $30.67 | 0.92 | metro |
| Tile and stone setters (47-2044) | 50% | $20.66 | $25.00 | $30.39 | $26.77 | 0.93 | state |
| Blended | 100% | 0.93 | |||||
Planning more than one job in Yuma?
Jobs that often go together with shower pan are priced below at their usual sizes, using the same Yuma wage and price inputs. Compared with national midpoints, window replacement comes out highest (−5%) and kitchen cabinets lowest (−11%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,350 – $21,500 | −8% |
| Kitchen cabinets | 25 linear ft | $3,900 – $12,300 | −11% |
| Window replacement | 10 windows | $4,250 – $14,200 | −5% |
| Kitchen remodel | 120 sq ft | $17,400 – $29,600 | −6% |
| Kitchen backsplash | 30 sq ft | $280 – $1,400 | −6% |
Yuma against nearby metros and the rest of Arizona
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 pan range from $1,750 to $2,050 across Yuma and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Yuma, AZthis page | $870 – $2,650 | $1,750 | |
| El Centro, CA85 miles | $950 – $2,850 | $1,900 | +8% |
| Phoenix, AZ110 miles | $910 – $2,750 | $1,850 | +4% |
| Tucson, AZ130 miles | $860 – $2,650 | $1,750 | level |
| Prescott Valley, AZ150 miles | $870 – $2,650 | $1,750 | +1% |
| San Diego, CA165 miles | $1,000 – $3,050 | $2,050 | +16% |
| Arizona (statewide) | $890 – $2,700 | $1,800 | +2% |
| United States | $930 – $2,800 | $1,850 | +7% |
Out of the 300 metros we cover, Yuma ranks #162 for the cost of this job (#1 is the most expensive). Statewide, Yuma is 2% below the Arizona figure.
Elsewhere in Arizona
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Phoenix, AZ | 2,375,760 jobs | $910 – $2,750 | $1,850 | +4% |
| Tucson, AZ | 389,630 jobs | $860 – $2,650 | $1,750 | level |
| Prescott Valley, AZ | 72,300 jobs | $870 – $2,650 | $1,750 | +1% |
| Flagstaff, AZ | 66,610 jobs | $870 – $2,650 | $1,750 | +1% |
| Lake Havasu City, AZ | 56,490 jobs | $830 – $2,550 | $1,700 | −3% |
Metros of a similar size
Big cities and small ones price differently, so here is Yuma against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Wausau, WI | 69,530 jobs | $1,100 – $3,050 | $2,050 | +18% |
| State College, PA | 68,840 jobs | $990 – $2,900 | $1,950 | +11% |
| Janesville, WI | 69,870 jobs | $1,050 – $2,950 | $2,000 | +15% |
| Traverse City, MI | 68,440 jobs | $860 – $2,600 | $1,750 | −1% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,400 to $2,100 for Yuma, AZ is attached.
Detailed shower pan report for Yuma, AZ, $9
The report lays out the shower pan numbers for Yuma, AZ line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Yuma: your questions
+How much does it cost to install a shower pan in Yuma?
For 1 pan, expect $870 to $2,650 in the Yuma area. A standard-spec job lands at $1,400 to $2,100. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Yuma?
About $841 to $2,169 per pan for materials and labor, plus $30 to $460 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Yuma or El Centro?
El Centro is 85 miles away. The midpoint for 1 pan there is $1,900, which is 8% more than Yuma ($1,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Yuma?
About 56% at the midpoint, or $980 out of $1,750. Materials are 30% and permits 14%. Nationally, labor is 56%.
+What would one shower pan cost in Yuma?
$870 to $2,650. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Yuma?
Often, but rules are set by your city or county building office, so call before you hire. Budget $30 to $460 for fees in the Yuma area (our national range of $30 to $500 scaled by the local price level).
+Is Yuma expensive for shower pan compared with the rest of Arizona?
Yuma is 2% below the Arizona statewide estimate ($1,800 at the midpoint). We cover 6 metros in Arizona; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Yuma?
The BLS median is $28.36 an hour in the Yuma area, compared with $30.67 nationally. The 25th to 75th percentile range is $21.75 to $31.97.
+What do basic and premium shower pan work cost in Yuma?
For 1 pan, basic work runs $870 to $1,550 and premium work $1,950 to $2,650. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Yuma
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.