Skip to content
CostLocal

Retaining wall cost in Minnesota

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (200 sq ft of wall face)
$8,800 – $15,600
Per sq ft of wall face
$44 – $76
before permit
Versus US midpoint
+19%
US $10,300
Metros covered
4

Minnesota prices for retaining wall: $8,800 to $15,600 for 200 sq ft of wall face, or $44 to $76 per sq ft of wall face without the permit. The state midpoint is 19% above the national one. Local wages for brickmasons and blockmasons are $45.78 an hour.

Inside Minnesota, the metros we cover range from $11,300 (Duluth) to $12,600 (Minneapolis) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your retaining wall cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Standard segmental block wall with drainage

Estimated cost for 200 sq ft of wall face in Minnesota (statewide), standard level

$10,900 to $13,600

About $53.50 to $66.50 per sq ft of wall face before permits. Labor is about 54% of the bill.

Cost breakdown
PartLowHigh
Materials$4,300$6,350
Labor$6,350$6,950
Permits and fees$170$330
Total$10,900$13,600
Save and get a PDF report

Cost breakdown for 200 sq ft of wall face in Minnesota

Part of the jobLowMidpointHighShare
Materials$2,800$5,350$7,85044%
Labor$5,950$6,650$7,35054%
Permits and fees$50$250$4402%
Total$8,800$12,200$15,600100%

Minnesota against its neighbors

Minnesota ranks 3 of 51 (the 50 states plus DC) for retaining wall, where 1 is the most expensive. The costliest is Hawaii at $13,300 and the cheapest New Mexico at $9,000, both for 200 sq ft of wall face at the midpoint. Minnesota sits at $12,200. The five states closest by workforce center are listed below.

States near Minnesota, same project and size
StateDistanceRangeMidpointvs. here
Iowa240 miles away$7,150 – $13,300$10,200−16%
Wisconsin260 miles away$7,950 – $14,300$11,100−9%
North Dakota270 miles away$7,600 – $13,900$10,800−12%
South Dakota290 miles away$6,800 – $12,900$9,850−19%
Nebraska320 miles away$6,850 – $12,900$9,850−19%

If you are planning more than one job in Minnesota

Each project weights the trades differently, so Minnesota's wage level does not push every price by the same amount. Compared with the US midpoint, paver patio is +20% and sod installation +10%.

Related projects with local prices
ProjectSizeRangevs. US
French drain60 linear ft$720 – $2,500+20%
Paver patio300 sq ft$3,600 – $6,550+20%
Concrete driveway600 sq ft$4,100 – $10,600+14%
Sod installation1,500 sq ft$1,650 – $3,600+10%
Sprinkler system4,000 sq ft of lawn$4,750 – $11,900+19%
Inground pool450 sq ft$43,000 – $134,500+19%

Basic, standard or premium: Minnesota prices

Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from short garden wall (4x25 ft), 100 sq ft of wall face to 40 ft x 6 ft (240 sq ft of wall face).

Basic

$8,800 to $11,500

Short block wall, easy access

Standard

$10,900 to $13,600

Standard segmental block wall with drainage

Premium

$12,900 to $15,600

Tall or stone wall, engineered, hard access

Cost by size and quality level
SizeBasicStandardPremium
short garden wall (4x25 ft), 100 sq ft of wall face$4,450 – $5,850$5,500 – $6,950$6,600 – $8,050
20 ft x 4 ft (80 sq ft of wall face)$3,550 – $4,750$4,450 – $5,650$5,350 – $6,500
40 ft x 4 ft (160 sq ft of wall face)$7,050 – $9,250$8,700 – $10,900$10,400 – $12,600
40 ft x 6 ft (240 sq ft of wall face)$10,600 – $13,800$13,000 – $16,200$15,400 – $18,700

Minnesota labor market for retaining wall

Minnesota's labor line is priced from 3 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 1.41 times the national level.

For brickmasons and blockmasons (47-2021, weighted 50%) the local median is $45.78 an hour, which is 53% above the national $29.87. The middle half of them earn between $40.81 and $47.51 an hour. BLS counts 1,040 of them working in the state, 3.5 for every 10,000 jobs (US: 3.4), so the local bench is about average.

For construction laborers (47-2061, weighted 30%) the local median is $28.97 an hour, which is 28% above the national $22.66. The middle half of them earn between $23.28 and $38.32 an hour. BLS counts 28,530 of them working in the state, 96.7 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.

Operating engineers and other construction equipment operators (47-2073), 20% of the weighting: a median of $38.04 an hour, 32% above the US median of $28.78. The middle half of them earn between $30.44 and $46.03 an hour. About 8,590 work in the state. That is 29.1 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.

A crew paid at the 75th percentile for brickmasons and blockmasons ($47.51 an hour) would add about $140 to the statewide midpoint; one at the 25th percentile ($40.81) would take off about $390. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 2,949,820 jobs across Minnesota (May 2025), which is 1.9% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Brickmasons and blockmasons (47-2021)50%$40.81$45.78$47.51$29.871.53state
Construction laborers (47-2061)30%$23.28$28.97$38.32$22.661.28state
Operating engineers and other construction equipment operators (47-2073)20%$30.44$38.04$46.03$28.781.32state
Blended100%1.41

When Minnesota weather lets you build

Weather decides when digging and ground work can happen, and Minnesota is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.

Minneapolis has the longest comfortable season of the metros we cover in Minnesota at 7 months (April through October); St. Cloud has the shortest at 6 (May through October). Rainfall runs from 28 inches a year in St. Cloud to 35 inches in Rochester.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Minneapolis883347: April through October
Duluth278316: May through October
Rochester780357: April through October
St. Cloud382286: May through October

Why two Minnesota quotes can differ

  • Height

    Walls over 4 feet need engineering, deeper excavation and more skilled labor; many cities require permits over 3-4 feet (HomeGuide).

  • Material

    Block, poured concrete and natural stone are priced differently; concrete and stone walls run higher than the segmental block default.

  • Drainage

    Every wall needs drainage behind it. A French drain adds $10-$85+ per linear foot.

  • Rebuilding

    Replacing an old wall adds $15-$30 per linear foot for demolition plus disposal.

  • Permit

    Permits cost $50-$450 depending on location and wall size.

Minnesota metro-by-metro prices

1 of the 4 metros sit above the statewide midpoint of $12,200, and the top-to-bottom gap is 11%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (200 sq ft of wall face)Midpointvs. state
Minneapolis, MN$9,100 – $16,100$12,600+3%
Rochester, MN$8,550 – $15,100$11,800−3%
St. Cloud, MN$8,250 – $14,700$11,500−6%
Duluth, MN$8,150 – $14,500$11,300−7%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $10,900 to $13,600 for Minnesota is attached.

Detailed retaining wall report for Minnesota, $9

Multi-page report for Minnesota: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Retaining wall in Minnesota: your questions

+How much does it cost to build a retaining wall in Minnesota?

$8,800 to $15,600 for 200 sq ft of wall face, using statewide wages and prices. Metro areas inside Minnesota can sit above or below that.

+Which city in Minnesota is cheapest for retaining wall?

Duluth at about $11,300 (midpoint, 200 sq ft of wall face). The priciest is Minneapolis at $12,600.

+Is retaining wall cheaper in Minnesota than the US average?

It is 19% more expensive: $12,200 against $10,300 for 200 sq ft of wall face at the midpoint.

+What share of the price is labor in Minnesota?

About 54% ($6,650). Materials are 44%. Statewide labor for this job is weighted 1.41x the national wage level.

+What do brickmasons and blockmasons earn in Minnesota?

The BLS statewide median is $45.78 an hour, against $29.87 for the US. The 25th to 75th percentile range is $40.81 to $47.51.

+Where does Minnesota rank for retaining wall costs?

3rd most expensive of 51 (the 50 states plus DC) at the midpoint, $12,200 for 200 sq ft of wall face. Rank 1 is the costliest.

+What do basic and premium retaining wall work cost in Minnesota?

For 200 sq ft of wall face, basic work runs $8,800 to $11,500 and premium work $12,900 to $15,600. Basic means: short block wall, easy access. Premium means: tall or stone wall, engineered, hard access.

+Does the season matter for retaining wall in Minnesota?

Yes where winters or summers are hard. Of the Minnesota metros we cover, Minneapolis has the most comfortable months (7 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

Retaining wall by city in Minnesota

Retaining wall: all pricesMinnesota cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 40% of the low installed price and 60% of the high one, since HomeGuide says labor is 40-60% of the total project cost.