Paver patio cost in Dalton, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (300 sq ft)
- $2,600 – $4,700
- Per sq ft
- $8.70 – $14.50
- before permit
- Versus US midpoint
- −14%
- US $4,250
- Rank of 300 metros
- #286
- 1 = most expensive
If you want to install a paver patio in Dalton, plan on $2,600 to $4,700 for 300 sq ft, all in. Per sq ft, that is $8.70 to $14.50 for materials and labor, with the permit on top. The local midpoint runs 14% lower than the national one. Construction laborers earn a median of $16.98 an hour in the Dalton area, 25% below the US median of $22.66.
Estimate your paver patio cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 300 sq ft in Dalton, GA, standard level
$3,250 to $4,050
About $10.50 to $13 per sq ft before permits. Labor is about 56% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,350 | $1,550 |
| Labor | $1,800 | $2,300 |
| Permits and fees | $95 | $220 |
| Total | $3,250 | $4,050 |
Cost breakdown for 300 sq ft in Dalton, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,150 | $1,450 | $1,750 | 40% |
| Labor | $1,450 | $2,050 | $2,650 | 56% |
| Permits and fees | $0 | $160 | $310 | 4% |
| Total | $2,600 | $3,650 | $4,700 | 100% |
Why Dalton prices look the way they do
Labor is 56% of the midpoint bill here, against 60% nationally. The mix of trades behind this job is construction laborers (50%), brickmasons and blockmasons (30%), landscaping and groundskeeping workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Dalton the blended ratio comes out at 0.81.
On the materials line, the BEA goods price index for the Dalton metro is 96.3 (US = 100). The midpoint materials bill for 300 sq ft comes to $1,450, compared with $1,500 at national prices. Permit and inspection fees are scaled by the broader index (89.8) and land at $0 to $310.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Dalton. The wage table below marks each row.
Climate in Dalton: timing your paver patio job
We use NOAA's 1991-2020 climate normals for Chattanooga Lovell Ap (20 miles from the city center). These are 30-year monthly averages, not forecasts.
February through June and September through December are the stretches where digging, grading and setting material in the ground runs into the fewest weather problems in Dalton (9 of 12 months). January has an average overnight low at or below freezing (32°F); July and August have an average daytime high of 90°F or more.
In January the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 56 days a year with a low at or below 32°F at this station.
Dalton gets about 55 inches of precipitation in a normal year, including roughly 4 inches of snow. The wettest months are March, July and December (5.3 inches in March). Inside the workable window, May and October are the driest, at 3.9 and 3.6 inches. The station averages about 58 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 51 | 32 | 5.0 | Cold |
| Feb | 56 | 36 | 5.0 | Workable |
| Mar | 64 | 42 | 5.3 | Workable |
| Apr | 74 | 50 | 4.9 | Workable |
| May | 81 | 59 | 3.9 | Workable |
| Jun | 88 | 67 | 4.2 | Workable |
| Jul | 91 | 71 | 5.1 | Hot |
| Aug | 90 | 70 | 3.7 | Hot |
| Sep | 84 | 64 | 4.2 | Workable |
| Oct | 74 | 51 | 3.6 | Workable |
| Nov | 62 | 40 | 4.8 | Workable |
| Dec | 53 | 35 | 5.3 | Workable |
What nearby projects cost in Dalton
Because every project leans on different trades, Dalton's wage level does not move all prices equally. Against the US midpoint, concrete slab runs −12% and concrete driveway −17%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete patio | 300 sq ft | $1,100 – $3,400 | −14% |
| Stamped concrete | 400 sq ft | $2,850 – $6,900 | −13% |
| Retaining wall | 200 sq ft of wall face | $5,950 – $11,900 | −13% |
| Wood deck | 300 sq ft | $6,450 – $12,900 | −15% |
| Concrete slab | 400 sq ft | $2,100 – $4,600 | −12% |
| Concrete driveway | 600 sq ft | $3,100 – $7,550 | −17% |
Why two Dalton quotes can differ
Paver material
Pavers alone average $2-$4 per sq ft but the full range is $1-$15 depending on concrete, brick, or natural stone (HomeGuide).
Base prep
The base (road base, fabric, edging, bedding and joint sand) is $1.40-$2.20 per sq ft of the materials number.
Excavation and grading
Digging out is $1-$5 per sq ft; regrading a sloped yard is $0.40-$2.00 per sq ft.
Add-ons priced for Dalton
Extras are quoted nationally and then scaled to Dalton by the average of the local wage index (0.81) and goods index (0.96), a factor of 0.88. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Excavation and haul-away | $270 – $1,350 |
Dalton labor market for paver patio
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Dalton is 0.81 times the national level.
Construction laborers (47-2061), 50% of the weighting: a median of $16.98 an hour, 25% below the US median of $22.66. The middle half of them earn between $12.27 and $20.63 an hour. About 240 work in the metro. That is 36.8 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Brickmasons and blockmasons (47-2021) carry 30% of the labor weighting. BLS does not publish this trade for the Dalton metro, so we used the Georgia statewide median: $24.35 an hour against $29.87 for the US. The middle half of them earn between $18.00 and $32.90 an hour.
For landscaping and groundskeeping workers (37-3011, weighted 20%) the local median is $17.49 an hour, which is 7% below the national $18.82. The middle half of them earn between $14.61 and $18.56 an hour. BLS counts 280 of them working in the area, 42.9 for every 10,000 jobs (US: 61.3), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($20.63 an hour) instead of the median, the labor line grows by about $210. At the 25th percentile ($12.27) it shrinks by about $270. The total moves by 5.6% or 7.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 65,300 jobs in the Dalton area. That makes it the 276th largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $12.27 | $16.98 | $20.63 | $22.66 | 0.75 | metro |
| Brickmasons and blockmasons (47-2021) | 30% | $18.00 | $24.35 | $32.90 | $29.87 | 0.82 | state |
| Landscaping and groundskeeping workers (37-3011) | 20% | $14.61 | $17.49 | $18.56 | $18.82 | 0.93 | metro |
| Blended | 100% | 0.81 | |||||
Cost by quality level and size in Dalton
Three bands are cut from the same cited range and localized for Dalton wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,600 to $3,450
Basic concrete pavers, simple pattern, level yard
Standard
$3,250 to $4,050
Mid-grade pavers, a border or curve, some regrading
Premium
$3,850 to $4,700
Natural stone or clay brick, complex pattern, slope or retaining edge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 12x12 (144 sq ft) | $1,250 – $1,700 | $1,600 – $2,050 | $1,950 – $2,400 |
| 16x16 (256 sq ft) | $2,200 – $2,950 | $2,750 – $3,500 | $3,350 – $4,050 |
| 20x20 (400 sq ft) | $3,450 – $4,550 | $4,300 – $5,350 | $5,100 – $6,150 |
| pool deck (800 sq ft) | $6,950 – $9,000 | $8,450 – $10,500 | $10,000 – $12,000 |
Dalton against nearby metros and the rest of Georgia
Of the five closest metros, none is cheaper than Dalton. Huntsville comes closest at about $3,700.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Dalton, GAthis page | $2,600 – $4,700 | $3,650 | |
| Chattanooga, TN35 miles | $2,900 – $5,300 | $4,100 | +12% |
| Gainesville, GA70 miles | $2,650 – $4,850 | $3,750 | +3% |
| Atlanta, GA80 miles | $2,850 – $5,200 | $4,000 | +10% |
| Knoxville, TN95 miles | $2,900 – $5,300 | $4,100 | +13% |
| Huntsville, AL105 miles | $2,650 – $4,800 | $3,700 | +2% |
| Georgia (statewide) | $2,700 – $4,950 | $3,850 | +5% |
| United States | $3,000 – $5,450 | $4,250 | +16% |
Across 300 US metros, Dalton comes in at #286 from the top. The priciest is Kahului, HI at $5,650; the cheapest is Dothan, AL at $3,500 (midpoints, 300 sq ft). Statewide, Dalton is 4% below the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $2,850 – $5,200 | $4,000 | +10% |
| Augusta, GA | 231,930 jobs | $2,650 – $4,850 | $3,750 | +3% |
| Savannah, GA | 198,360 jobs | $2,650 – $4,800 | $3,750 | +2% |
| Columbus, GA | 116,380 jobs | $2,600 – $4,700 | $3,650 | level |
| Gainesville, GA | 103,870 jobs | $2,650 – $4,850 | $3,750 | +3% |
| Athens, GA | 95,800 jobs | $2,650 – $4,750 | $3,700 | +1% |
Cities with a workforce like Dalton's
Big cities and small ones price differently, so here is Dalton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| El Centro, CA | 65,430 jobs | $3,300 – $5,950 | $4,600 | +26% |
| Terre Haute, IN | 65,120 jobs | $2,950 – $5,350 | $4,150 | +14% |
| Harrisonburg, VA | 65,460 jobs | $2,800 – $5,100 | $3,950 | +8% |
| Muskegon, MI | 62,340 jobs | $2,900 – $5,300 | $4,100 | +12% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,250 to $4,050 for Dalton, GA is attached.
Detailed paver patio report for Dalton, GA, $9
The report lays out the paver patio numbers for Dalton, GA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Paver patio in Dalton: your questions
+How much does it cost to install a paver patio in Dalton?
For 300 sq ft, expect $2,600 to $4,700 in the Dalton area. A standard-spec job lands at $3,250 to $4,050. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for paver patio in Dalton?
About $8.70 to $14.50 per sq ft for materials and labor, plus $0 to $310 for the permit if one is needed. The US range is $10 to $17.
+Is paver patio cheaper in Dalton or Chattanooga?
Chattanooga is 35 miles away. The midpoint for 300 sq ft there is $4,100, which is 12% more than Dalton ($3,650). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Dalton?
About 56% at the midpoint, or $2,050 out of $3,650. Materials are 40% and permits 4%. Nationally, labor is 60%.
+What would 20x20 (400 sq ft) cost in Dalton?
$3,450 to $6,150. Pick a different size in the estimator above to get your own number.
+Does paver patio need a permit in Dalton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $310 for fees in the Dalton area (our national range of $0 to $350 scaled by the local price level).
+Is Dalton expensive for paver patio compared with the rest of Georgia?
Dalton is 4% below the Georgia statewide estimate ($3,850 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do construction laborers earn in Dalton?
The BLS median is $16.98 an hour in the Dalton area, compared with $22.66 nationally. The 25th to 75th percentile range is $12.27 to $20.63.
+What do basic and premium paver patio work cost in Dalton?
For 300 sq ft, basic work runs $2,600 to $3,450 and premium work $3,850 to $4,700. Basic means: basic concrete pavers, simple pattern, level yard. Premium means: natural stone or clay brick, complex pattern, slope or retaining edge.
+When is the best time to install a paver patio in Dalton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through June and September through December. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "excavation and haul-away" add in Dalton?
$270 to $1,350 for 300 sq ft, from a national range scaled by the local wage and goods indexes.
Paver patio near Dalton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: 2026 Paver Patio Cost | Paver Installation Costs (accessed November 4, 2026)
- HomeGuide: How Much Does Stamped Concrete Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020