Skip to content
CostLocal

Patio door cost in Winston, NC

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1 door)
$550 – $5,400
Per door
$553 – $5,396
before permit
Versus US midpoint
−10%
US $3,300
Rank of 300 metros
#217
1 = most expensive

Local price for a patio door in the Winston area: $550 to $5,400 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 10% lower than the US figure. Carpenters earn a median of $24.01 an hour in the Winston area, 18% below the US median of $29.12.

Estimate your patio door cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Wider slider or French door with better glass

Estimated cost for 1 door in Winston, NC, standard level

$2,000 to $3,950

About $2,006 to $3,943 per door before permits. Labor is about 45% of the bill.

Cost breakdown
PartLowHigh
Materials$1,150$2,150
Labor$870$1,800
Permits and fees$0$0
Total$2,000$3,950
Save and get a PDF report

Cost breakdown for 1 door in Winston, NC

Part of the jobLowMidpointHighShare
Materials$390$1,650$2,90055%
Labor$170$1,350$2,50045%
Permits and fees$0$0$00%
Total$550$2,950$5,400100%

Why Winston prices look the way they do

We price the labor side from BLS wage data for 3 trades: carpenters at 60%, glaziers at 30%, general maintenance and repair workers at 10%. Weighted together, Winston wages are 0.83 times the national level. Labor makes up about 45% of the midpoint estimate (48% at national prices).

Materials are scaled with BEA's regional price parity for goods. Winston is at 96.6 against 100 for the US, so a materials line of $1,700 nationally becomes $1,650 here (midpoint, 1 door). Permits follow the all-items index of 92.0: $0 to $0.

Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Winston. The wage table below marks each row.

Pick a size, pick a tier: patio door pricing in Winston

The cited range is split into basic, standard and premium bands, then scaled to Winston. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one sliding door to two doors.

Basic

$550 to $2,500

Standard vinyl slider, same opening

Standard

$2,000 to $3,950

Wider slider or French door with better glass

Premium

$3,450 to $5,400

Multi-panel or custom door, new opening

Cost by size and quality level
SizeBasicStandardPremium
one sliding door$550 – $2,500$2,000 – $3,950$3,450 – $5,400
two doors$1,100 – $5,000$4,000 – $7,900$6,900 – $10,800

The best months for patio door in Winston

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Winston Salem Rynlds Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

Weather is not a serious constraint for exterior installation in Winston: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.

Winston gets about 43 inches of precipitation in a normal year. The wettest months are July, August and September (4.5 inches in August). The station averages about 33 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Winston Salem Rynlds Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan49313.4Workable
Feb53332.9Workable
Mar61403.6Workable
Apr71483.7Workable
May78573.8Workable
Jun85653.6Workable
Jul88694.2Workable
Aug86684.5Workable
Sep80613.9Workable
Oct71493.3Workable
Nov60393.1Workable
Dec52343.3Workable

Specs and site conditions that change a Winston bid

  • Door type

    Sliding glass doors run $1,200-$4,000 installed; exterior French doors $1,300-$5,500; telescoping doors $1,500-$5,000 (HomeGuide).

  • New opening versus replacement

    Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.

  • Old door removal

    Removing and disposing of the old door is $100-$500 extra.

Planning more than one job in Winston?

Jobs that often go together with patio door are priced below at their usual sizes, using the same Winston wage and price inputs. Compared with national midpoints, front door comes out highest (−7%) and wood deck lowest (−9%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Window replacement10 windows$4,150 – $14,000−7%
Front door1 door$450 – $2,350−7%
Storm door1 door$320 – $880−8%
Wood deck300 sq ft$6,850 – $13,800−9%
Garage door1 door$650 – $3,450−7%

Who does the work: Winston trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Winston the blend is 0.83.

Carpenters (47-2031), 60% of the weighting: a median of $24.01 an hour, 18% below the US median of $29.12. The middle half of them earn between $20.95 and $27.79 an hour. About 510 work in the metro. That is 18.8 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

Glaziers (47-2121) carry 30% of the labor weighting. BLS does not publish this trade for the Winston metro, so we used the North Carolina statewide median: $22.20 an hour against $27.44 for the US. The middle half of them earn between $19.56 and $26.61 an hour.

For general maintenance and repair workers (49-9071, weighted 10%) the local median is $22.64 an hour, which is 5% below the national $23.84. The middle half of them earn between $18.30 and $28.81 an hour. BLS counts 2,480 of them working in the area, 91.2 for every 10,000 jobs (US: 98.4), so the local bench is about average.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $100. That is a swing of roughly 3.4% to 4.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Winston-Salem has 271,980 jobs in total (BLS, May 2025), ranking 94th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)60%$20.95$24.01$27.79$29.120.82metro
Glaziers (47-2121)30%$19.56$22.20$26.61$27.440.81state
General maintenance and repair workers (49-9071)10%$18.30$22.64$28.81$23.840.95metro
Blended100%0.83

How Winston compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 door range from $2,950 to $3,000 across Winston and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Winston, NCthis page$550 – $5,400$2,950
Greensboro, NC30 miles$550 – $5,400$2,950level
Burlington, NC55 miles$550 – $5,350$2,950level
Hickory, NC65 miles$550 – $5,350$2,950−1%
Charlotte, NC70 miles$560 – $5,500$3,000+2%
Durham, NC70 miles$560 – $5,450$3,000+1%
North Carolina (statewide)$550 – $5,400$2,950level
United States$600 – $6,000$3,300+11%

Out of the 300 metros we cover, Winston ranks #217 for the cost of this job (#1 is the most expensive). Statewide, Winston is 0% above the North Carolina figure.

Elsewhere in North Carolina

North Carolina metros compared with Winston
MetroSizeRangeMidpointvs. here
Charlotte, NC1,358,370 jobs$560 – $5,500$3,000+2%
Raleigh, NC743,120 jobs$560 – $5,450$3,000+1%
Greensboro, NC365,410 jobs$550 – $5,400$2,950level
Durham, NC344,020 jobs$560 – $5,450$3,000+1%
Wilmington, NC191,280 jobs$550 – $5,400$3,000level
Asheville, NC180,620 jobs$560 – $5,450$3,000+1%

Metros of a similar size

Big cities and small ones price differently, so here is Winston against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Fayetteville, AR275,180 jobs$540 – $5,250$2,900−2%
Ogden, UT271,370 jobs$560 – $5,450$3,000+1%
Reno, NV275,680 jobs$580 – $5,850$3,200+8%
Jackson, MS270,730 jobs$540 – $5,200$2,850−3%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,000 to $3,950 for Winston, NC is attached.

Detailed patio door report for Winston, NC, $9

The report lays out the patio door numbers for Winston, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Patio door in Winston: your questions

+How much does it cost to install a patio door in Winston?

For 1 door, expect $550 to $5,400 in the Winston area. A standard-spec job lands at $2,000 to $3,950. Small jobs usually cost more per door and large ones less.

+What is the price per door for patio door in Winston?

About $553 to $5,396 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $600 to $6,000.

+Is patio door cheaper in Winston or Greensboro?

Greensboro is 30 miles away. The midpoint for 1 door there is $2,950, which is 0% less than Winston ($2,950). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Winston?

About 45% at the midpoint, or $1,350 out of $2,950. Materials are 55% and permits 0%. Nationally, labor is 48%.

+What would two doors cost in Winston?

$1,100 to $10,800. Pick a different size in the estimator above to get your own number.

+Does patio door need a permit in Winston?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Winston area (our national range of $0 to $0 scaled by the local price level).

+Is Winston expensive for patio door compared with the rest of North Carolina?

Winston is 0% above the North Carolina statewide estimate ($2,950 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.

+What do carpenters earn in Winston?

The BLS median is $24.01 an hour in the Winston area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.95 to $27.79.

+What do basic and premium patio door work cost in Winston?

For 1 door, basic work runs $550 to $2,500 and premium work $3,450 to $5,400. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.

+Is there a bad season to install a patio door in Winston?

Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.

Patio door near Winston

Patio door: all pricesPatio door in North CarolinaAll projects in WinstonNorth Carolina cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.