Patio door cost in Greensboro, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $550 – $5,400
- Per door
- $552 – $5,382
- before permit
- Versus US midpoint
- −10%
- US $3,300
- Rank of 300 metros
- #221
- 1 = most expensive
Local price for a patio door in the Greensboro area: $550 to $5,400 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 10% lower than the US figure. Carpenters earn a median of $24.00 an hour in the Greensboro area, 18% below the US median of $29.12.
Estimate your patio door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Greensboro, NC, standard level
$2,000 to $3,950
About $2,001 to $3,933 per door before permits. Labor is about 45% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $2,150 |
| Labor | $860 | $1,800 |
| Permits and fees | $0 | $0 |
| Total | $2,000 | $3,950 |
Cost breakdown for 1 door in Greensboro, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $390 | $1,650 | $2,900 | 55% |
| Labor | $170 | $1,300 | $2,500 | 45% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $550 | $2,950 | $5,400 | 100% |
Why Greensboro prices look the way they do
We price the labor side from BLS wage data for 3 trades: carpenters at 60%, glaziers at 30%, general maintenance and repair workers at 10%. Weighted together, Greensboro wages are 0.83 times the national level. Labor makes up about 45% of the midpoint estimate (48% at national prices).
Materials are scaled with BEA's regional price parity for goods. Greensboro is at 96.6 against 100 for the US, so a materials line of $1,700 nationally becomes $1,650 here (midpoint, 1 door). Permits follow the all-items index of 92.9: $0 to $0.
Planning more than one job in Greensboro?
Jobs that often go together with patio door are priced below at their usual sizes, using the same Greensboro wage and price inputs. Compared with national midpoints, garage door comes out highest (−6%) and wood deck lowest (−9%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Window replacement | 10 windows | $4,100 – $14,000 | −7% |
| Front door | 1 door | $450 – $2,350 | −7% |
| Storm door | 1 door | $320 – $880 | −8% |
| Wood deck | 300 sq ft | $6,850 – $13,700 | −9% |
| Garage door | 1 door | $650 – $3,450 | −6% |
Greensboro: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Greensboro. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one sliding door to two doors.
Basic
$550 to $2,500
Standard vinyl slider, same opening
Standard
$2,000 to $3,950
Wider slider or French door with better glass
Premium
$3,450 to $5,400
Multi-panel or custom door, new opening
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one sliding door | $550 – $2,500 | $2,000 – $3,950 | $3,450 – $5,400 |
| two doors | $1,100 – $4,950 | $4,000 – $7,850 | $6,900 – $10,800 |
Greensboro against nearby metros and the rest of North Carolina
Same job, same size (1 door), priced for the nearest metros. Charlotte is the priciest of the group at $3,000. Burlington is the cheapest at $2,950.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greensboro, NCthis page | $550 – $5,400 | $2,950 | |
| Burlington, NC20 miles | $550 – $5,350 | $2,950 | level |
| Winston, NC30 miles | $550 – $5,400 | $2,950 | level |
| Durham, NC40 miles | $560 – $5,450 | $3,000 | +2% |
| Raleigh, NC75 miles | $560 – $5,450 | $3,000 | +1% |
| Charlotte, NC80 miles | $560 – $5,500 | $3,000 | +2% |
| North Carolina (statewide) | $550 – $5,400 | $2,950 | level |
| United States | $600 – $6,000 | $3,300 | +11% |
Out of the 300 metros we cover, Greensboro ranks #221 for the cost of this job (#1 is the most expensive). Statewide, Greensboro is 0% above the North Carolina figure.
Elsewhere in North Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $560 – $5,500 | $3,000 | +2% |
| Raleigh, NC | 743,120 jobs | $560 – $5,450 | $3,000 | +1% |
| Durham, NC | 344,020 jobs | $560 – $5,450 | $3,000 | +2% |
| Winston, NC | 271,980 jobs | $550 – $5,400 | $2,950 | level |
| Wilmington, NC | 191,280 jobs | $550 – $5,400 | $3,000 | +1% |
| Asheville, NC | 180,620 jobs | $560 – $5,450 | $3,000 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Greensboro against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dayton, OH | 372,660 jobs | $580 – $5,850 | $3,200 | +8% |
| Little Rock, AR | 358,210 jobs | $530 – $5,200 | $2,850 | −3% |
| Allentown, PA | 377,180 jobs | $600 – $6,050 | $3,300 | +12% |
| Worcester, MA | 349,880 jobs | $640 – $6,650 | $3,650 | +23% |
Patio door: what moves the price in Greensboro
Door type
Sliding glass doors run $1,200-$4,000 installed; exterior French doors $1,300-$5,500; telescoping doors $1,500-$5,000 (HomeGuide).
New opening versus replacement
Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.
Old door removal
Removing and disposing of the old door is $100-$500 extra.
Who does the work: Greensboro trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Greensboro the blend is 0.83.
Carpenters (47-2031), 60% of the weighting: a median of $24.00 an hour, 18% below the US median of $29.12. The middle half of them earn between $19.49 and $28.58 an hour. About 760 work in the metro. That is 20.8 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
Glaziers (47-2121), 30% of the weighting: a median of $21.75 an hour, 21% below the US median of $27.44. The middle half of them earn between $19.28 and $27.18 an hour. About 50 work in the metro. That is 1.4 per 10,000 jobs, compared with 3.8 nationally, so expect fewer local crews to bid.
For general maintenance and repair workers (49-9071, weighted 10%) the local median is $22.75 an hour, which is 5% below the national $23.84. The middle half of them earn between $18.58 and $28.38 an hour. BLS counts 3,530 of them working in the area, 96.6 for every 10,000 jobs (US: 98.4), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $150 to the midpoint estimate; the 25th percentile takes off about $150. That is a swing of roughly 5.0% to 5.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Greensboro-High Point has 365,410 jobs in total (BLS, May 2025), ranking 71st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $19.49 | $24.00 | $28.58 | $29.12 | 0.82 | metro |
| Glaziers (47-2121) | 30% | $19.28 | $21.75 | $27.18 | $27.44 | 0.79 | metro |
| General maintenance and repair workers (49-9071) | 10% | $18.58 | $22.75 | $28.38 | $23.84 | 0.95 | metro |
| Blended | 100% | 0.83 | |||||
The best months for patio door in Greensboro
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Greensboro Wtp (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Greensboro: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Greensboro gets about 46 inches of precipitation in a normal year. The wettest months are June, July and August (5.8 inches in July). The station averages about 42 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 50 | 30 | 3.2 | Workable |
| Feb | 54 | 33 | 2.5 | Workable |
| Mar | 62 | 39 | 3.7 | Workable |
| Apr | 71 | 48 | 3.6 | Workable |
| May | 79 | 58 | 3.3 | Workable |
| Jun | 85 | 65 | 5.1 | Workable |
| Jul | 89 | 71 | 5.8 | Workable |
| Aug | 87 | 68 | 4.5 | Workable |
| Sep | 81 | 61 | 4.4 | Workable |
| Oct | 71 | 49 | 3.2 | Workable |
| Nov | 61 | 39 | 3.0 | Workable |
| Dec | 53 | 33 | 3.4 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,000 to $3,950 for Greensboro, NC is attached.
Detailed patio door report for Greensboro, NC, $9
The report lays out the patio door numbers for Greensboro, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Patio door in Greensboro: your questions
+How much does it cost to install a patio door in Greensboro?
For 1 door, expect $550 to $5,400 in the Greensboro area. A standard-spec job lands at $2,000 to $3,950. Small jobs usually cost more per door and large ones less.
+What is the price per door for patio door in Greensboro?
About $552 to $5,382 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $600 to $6,000.
+Is patio door cheaper in Greensboro or Burlington?
Burlington is 20 miles away. The midpoint for 1 door there is $2,950, which is 0% less than Greensboro ($2,950). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greensboro?
About 45% at the midpoint, or $1,300 out of $2,950. Materials are 55% and permits 0%. Nationally, labor is 48%.
+What would two doors cost in Greensboro?
$1,100 to $10,800. Pick a different size in the estimator above to get your own number.
+Does patio door need a permit in Greensboro?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Greensboro area (our national range of $0 to $0 scaled by the local price level).
+Is Greensboro expensive for patio door compared with the rest of North Carolina?
Greensboro is 0% above the North Carolina statewide estimate ($2,950 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do carpenters earn in Greensboro?
The BLS median is $24.00 an hour in the Greensboro area, compared with $29.12 nationally. The 25th to 75th percentile range is $19.49 to $28.58.
+What do basic and premium patio door work cost in Greensboro?
For 1 door, basic work runs $550 to $2,500 and premium work $3,450 to $5,400. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.
+Is there a bad season to install a patio door in Greensboro?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
Patio door near Greensboro
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does It Cost to Install or Replace Patio Doors? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.