Skip to content
CostLocal

Patio door cost in Tallahassee, FL

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1 door)
$540 – $5,300
Per door
$545 – $5,283
before permit
Versus US midpoint
−12%
US $3,300
Rank of 300 metros
#254
1 = most expensive

A patio door in Tallahassee, FL usually costs $540 to $5,300 for 1 door. That works out to about $545 to $5,283 per door before permits. Compared with the national midpoint that is $390 less. Carpenters earn a median of $22.53 an hour in the Tallahassee area, 23% below the US median of $29.12.

Estimate your patio door cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Wider slider or French door with better glass

Estimated cost for 1 door in Tallahassee, FL, standard level

$1,950 to $3,850

About $1,966 to $3,862 per door before permits. Labor is about 44% of the bill.

Cost breakdown
PartLowHigh
Materials$1,150$2,150
Labor$830$1,750
Permits and fees$0$0
Total$1,950$3,850
Save and get a PDF report

Cost breakdown for 1 door in Tallahassee, FL

Part of the jobLowMidpointHighShare
Materials$380$1,650$2,90056%
Labor$160$1,300$2,40044%
Permits and fees$0$0$00%
Total$540$2,900$5,300100%

What is behind the Tallahassee number

Labor is 44% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is carpenters (60%), glaziers (30%), general maintenance and repair workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Tallahassee the blended ratio comes out at 0.80.

Materials are scaled with BEA's regional price parity for goods. Tallahassee is at 96.2 against 100 for the US, so a materials line of $1,700 nationally becomes $1,650 here (midpoint, 1 door). Permits follow the all-items index of 93.9: $0 to $0.

Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Tallahassee. The wage table below marks each row.

Tallahassee weather and the patio door calendar

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Tallahassee (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Tallahassee are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.

Tallahassee gets about 59 inches of precipitation in a normal year. The wettest months are June, July and August (7.8 inches in June). Inside the workable window, October and November are the driest, at 3.2 and 3.1 inches. The station averages about 103 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Tallahassee (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan64414.4Workable
Feb68444.3Workable
Mar74495.2Workable
Apr80543.5Workable
May87633.4Workable
Jun91717.8Hot
Jul92737.1Hot
Aug92737.6Hot
Sep89704.9Workable
Oct82593.2Workable
Nov73483.1Workable
Dec66434.2Workable

Tallahassee: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Tallahassee. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one sliding door to two doors.

Basic

$540 to $2,450

Standard vinyl slider, same opening

Standard

$1,950 to $3,850

Wider slider or French door with better glass

Premium

$3,400 to $5,300

Multi-panel or custom door, new opening

Cost by size and quality level
SizeBasicStandardPremium
one sliding door$540 – $2,450$1,950 – $3,850$3,400 – $5,300
two doors$1,100 – $4,900$3,950 – $7,700$6,800 – $10,600

Related projects, priced for Tallahassee

Jobs that often go together with patio door are priced below at their usual sizes, using the same Tallahassee wage and price inputs. Compared with national midpoints, window replacement comes out highest (−8%) and wood deck lowest (−12%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Window replacement10 windows$4,100 – $13,900−8%
Front door1 door$430 – $2,300−8%
Storm door1 door$310 – $860−11%
Wood deck300 sq ft$6,650 – $13,400−12%
Garage door1 door$630 – $3,400−8%

Tallahassee against nearby metros and the rest of Florida

Same job, same size (1 door), priced for the nearest metros. Crestview is the priciest of the group at $2,950. Albany is the cheapest at $2,750.

Comparison with nearby areas
AreaRangeMidpointvs. here
Tallahassee, FLthis page$540 – $5,300$2,900
Panama City, FL80 miles$550 – $5,350$2,950+1%
Albany, GA90 miles$520 – $5,000$2,750−6%
Dothan, AL95 miles$530 – $5,100$2,850−3%
Gainesville, FL115 miles$550 – $5,350$2,950+1%
Crestview, FL125 miles$550 – $5,350$2,950+1%
Florida (statewide)$560 – $5,450$3,000+3%
United States$600 – $6,000$3,300+13%

Out of the 300 metros we cover, Tallahassee ranks #254 for the cost of this job (#1 is the most expensive). Statewide, Tallahassee is 3% below the Florida figure.

Elsewhere in Florida

Florida metros compared with Tallahassee
MetroSizeRangeMidpointvs. here
Miami, FL2,819,940 jobs$580 – $5,600$3,100+6%
Tampa, FL1,447,120 jobs$550 – $5,450$3,000+3%
Orlando, FL1,411,730 jobs$550 – $5,400$2,950+2%
Jacksonville, FL765,930 jobs$560 – $5,450$3,000+3%
North Port, FL339,940 jobs$560 – $5,450$3,000+3%
Cape Coral, FL304,790 jobs$550 – $5,400$3,000+2%

Metros of a similar size

Big cities and small ones price differently, so here is Tallahassee against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Salinas, CA186,430 jobs$640 – $6,500$3,550+23%
York, PA183,590 jobs$610 – $6,100$3,350+15%
Salem, OR188,620 jobs$640 – $6,500$3,550+22%
Lincoln, NE182,620 jobs$550 – $5,400$2,950+2%

Patio door: what moves the price in Tallahassee

  • Glass

    Low-E, tempered and hurricane-rated glass cost more than basic single-pane glass.

  • Door type

    Sliding glass doors run $1,200-$4,000 installed; exterior French doors $1,300-$5,500; telescoping doors $1,500-$5,000 (HomeGuide).

  • New opening versus replacement

    Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.

What local crews earn in Tallahassee

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Tallahassee the blend is 0.80.

Carpenters (47-2031), 60% of the weighting: a median of $22.53 an hour, 23% below the US median of $29.12. The middle half of them earn between $20.00 and $25.95 an hour. About 470 work in the metro. That is 25.2 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

Glaziers (47-2121) carry 30% of the labor weighting. BLS does not publish this trade for the Tallahassee metro, so we used the Florida statewide median: $22.61 an hour against $27.44 for the US. The middle half of them earn between $18.11 and $28.54 an hour.

For general maintenance and repair workers (49-9071, weighted 10%) the local median is $20.81 an hour, which is 13% below the national $23.84. The middle half of them earn between $17.26 and $23.51 an hour. BLS counts 1,980 of them working in the area, 106.4 for every 10,000 jobs (US: 98.4), so the local bench is about average.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $110 to the midpoint estimate; the 25th percentile takes off about $85. That is a swing of roughly 2.9% to 3.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Tallahassee has 186,160 jobs in total (BLS, May 2025), ranking 124th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)60%$20.00$22.53$25.95$29.120.77metro
Glaziers (47-2121)30%$18.11$22.61$28.54$27.440.82state
General maintenance and repair workers (49-9071)10%$17.26$20.81$23.51$23.840.87metro
Blended100%0.80

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,950 to $3,850 for Tallahassee, FL is attached.

Detailed patio door report for Tallahassee, FL, $9

The report lays out the patio door numbers for Tallahassee, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Patio door in Tallahassee: your questions

+How much does it cost to install a patio door in Tallahassee?

For 1 door, expect $540 to $5,300 in the Tallahassee area. A standard-spec job lands at $1,950 to $3,850. Small jobs usually cost more per door and large ones less.

+What is the price per door for patio door in Tallahassee?

About $545 to $5,283 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $600 to $6,000.

+Is patio door cheaper in Tallahassee or Panama City?

Panama City is 80 miles away. The midpoint for 1 door there is $2,950, which is 1% more than Tallahassee ($2,900). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Tallahassee?

About 44% at the midpoint, or $1,300 out of $2,900. Materials are 56% and permits 0%. Nationally, labor is 48%.

+What would two doors cost in Tallahassee?

$1,100 to $10,600. Pick a different size in the estimator above to get your own number.

+Does patio door need a permit in Tallahassee?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Tallahassee area (our national range of $0 to $0 scaled by the local price level).

+Is Tallahassee expensive for patio door compared with the rest of Florida?

Tallahassee is 3% below the Florida statewide estimate ($3,000 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.

+What do carpenters earn in Tallahassee?

The BLS median is $22.53 an hour in the Tallahassee area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.00 to $25.95.

+What do basic and premium patio door work cost in Tallahassee?

For 1 door, basic work runs $540 to $2,450 and premium work $3,400 to $5,300. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.

+When is the best time to install a patio door in Tallahassee?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Patio door near Tallahassee

Patio door: all pricesPatio door in FloridaAll projects in TallahasseeFlorida cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.