Patio door cost in Norwich, CT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $610 – $6,150
- Per door
- $606 – $6,165
- before permit
- Versus US midpoint
- +3%
- US $3,300
- Rank of 300 metros
- #67
- 1 = most expensive
Local price for a patio door in the Norwich area: $610 to $6,150 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Carpenters earn a median of $31.01 an hour in the Norwich area, 6% above the US median of $29.12.
Estimate your patio door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Norwich, CT, standard level
$2,250 to $4,500
About $2,273 to $4,497 per door before permits. Labor is about 51% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $2,150 |
| Labor | $1,150 | $2,350 |
| Permits and fees | $0 | $0 |
| Total | $2,250 | $4,500 |
Cost breakdown for 1 door in Norwich, CT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $390 | $1,650 | $2,900 | 49% |
| Labor | $220 | $1,750 | $3,250 | 51% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $610 | $3,400 | $6,150 | 100% |
Where the Norwich price comes from
Labor is 51% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is carpenters (60%), glaziers (30%), general maintenance and repair workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Norwich the blended ratio comes out at 1.08.
Materials are scaled with BEA's regional price parity for goods. Norwich is at 97.3 against 100 for the US, so a materials line of $1,700 nationally becomes $1,650 here (midpoint, 1 door). Permits follow the all-items index of 100.4: $0 to $0.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Norwich. The wage table below marks each row.
Pick a size, pick a tier: patio door pricing in Norwich
The cited range is split into basic, standard and premium bands, then scaled to Norwich. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one sliding door to two doors.
Basic
$610 to $2,850
Standard vinyl slider, same opening
Standard
$2,250 to $4,500
Wider slider or French door with better glass
Premium
$3,950 to $6,150
Multi-panel or custom door, new opening
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one sliding door | $610 – $2,850 | $2,250 – $4,500 | $3,950 – $6,150 |
| two doors | $1,200 – $5,650 | $4,550 – $9,000 | $7,900 – $12,300 |
Patio door: what moves the price in Norwich
Door type
Sliding glass doors run $1,200-$4,000 installed; exterior French doors $1,300-$5,500; telescoping doors $1,500-$5,000 (HomeGuide).
New opening versus replacement
Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.
Old door removal
Removing and disposing of the old door is $100-$500 extra.
Who does the work: Norwich trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Norwich the blend is 1.08.
Carpenters (47-2031), 60% of the weighting: a median of $31.01 an hour, 6% above the US median of $29.12. The middle half of them earn between $25.21 and $37.99 an hour. About 740 work in the metro. That is 58.5 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
Glaziers (47-2121) carry 30% of the labor weighting. BLS does not publish this trade for the Norwich metro, so we used the Connecticut statewide median: $30.69 an hour against $27.44 for the US. The middle half of them earn between $27.42 and $38.41 an hour.
For general maintenance and repair workers (49-9071, weighted 10%) the local median is $25.57 an hour, which is 7% above the national $23.84. The middle half of them earn between $21.80 and $30.76 an hour. BLS counts 820 of them working in the area, 64.8 for every 10,000 jobs (US: 98.4), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $230 to the midpoint estimate; the 25th percentile takes off about $190. That is a swing of roughly 5.6% to 6.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Norwich-New London-Willimantic has 126,450 jobs in total (BLS, May 2025), ranking 171st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $25.21 | $31.01 | $37.99 | $29.12 | 1.06 | metro |
| Glaziers (47-2121) | 30% | $27.42 | $30.69 | $38.41 | $27.44 | 1.12 | state |
| General maintenance and repair workers (49-9071) | 10% | $21.80 | $25.57 | $30.76 | $23.84 | 1.07 | metro |
| Blended | 100% | 1.08 | |||||
How Norwich compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 door range from $3,300 to $3,700 across Norwich and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Norwich, CTthis page | $610 – $6,150 | $3,400 | |
| Hartford, CT25 miles | $620 – $6,300 | $3,450 | +2% |
| New Haven, CT40 miles | $610 – $6,200 | $3,400 | +1% |
| Providence, RI45 miles | $600 – $6,050 | $3,300 | −2% |
| Waterbury, CT50 miles | $600 – $6,050 | $3,350 | −1% |
| Springfield, MA55 miles | $650 – $6,800 | $3,700 | +10% |
| Connecticut (statewide) | $610 – $6,200 | $3,400 | level |
| United States | $600 – $6,000 | $3,300 | −3% |
Out of the 300 metros we cover, Norwich ranks #67 for the cost of this job (#1 is the most expensive). Statewide, Norwich is 0% below the Connecticut figure.
Elsewhere in Connecticut
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Hartford, CT | 599,770 jobs | $620 – $6,300 | $3,450 | +2% |
| Bridgeport, CT | 404,180 jobs | $610 – $6,150 | $3,400 | level |
| New Haven, CT | 281,410 jobs | $610 – $6,200 | $3,400 | +1% |
| Waterbury, CT | 160,710 jobs | $600 – $6,050 | $3,350 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Norwich against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Elkhart, IN | 127,730 jobs | $590 – $6,050 | $3,350 | −2% |
| Crestview, FL | 125,050 jobs | $550 – $5,350 | $2,950 | −13% |
| Kennewick, WA | 129,490 jobs | $640 – $6,400 | $3,500 | +4% |
| Duluth, MN | 124,710 jobs | $590 – $6,050 | $3,350 | −2% |
The best months for patio door in Norwich
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Norwich Public Utility Plt (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Norwich are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Norwich gets about 52 inches of precipitation in a normal year, including roughly 28 inches of snow. The wettest months are March, October and December (5.1 inches in March). Inside the workable window, May and July are the driest, at 3.6 and 3.6 inches. The station averages about 15 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 38 | 21 | 3.9 | Cold |
| Feb | 41 | 23 | 3.8 | Cold |
| Mar | 48 | 29 | 5.1 | Workable |
| Apr | 59 | 39 | 4.7 | Workable |
| May | 70 | 49 | 3.6 | Workable |
| Jun | 78 | 59 | 4.3 | Workable |
| Jul | 84 | 65 | 3.6 | Workable |
| Aug | 83 | 63 | 4.4 | Workable |
| Sep | 76 | 55 | 4.8 | Workable |
| Oct | 64 | 44 | 4.9 | Workable |
| Nov | 53 | 34 | 4.2 | Workable |
| Dec | 43 | 27 | 5.0 | Cold |
What nearby projects cost in Norwich
Jobs that often go together with patio door are priced below at their usual sizes, using the same Norwich wage and price inputs. Compared with national midpoints, wood deck comes out highest (+2%) and front door lowest (level); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Window replacement | 10 windows | $4,550 – $15,000 | +1% |
| Front door | 1 door | $510 – $2,500 | level |
| Storm door | 1 door | $360 – $960 | +1% |
| Wood deck | 300 sq ft | $7,700 – $15,400 | +2% |
| Garage door | 1 door | $710 – $3,700 | +1% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,250 to $4,500 for Norwich, CT is attached.
Take this estimate with you: PDF report, $9
The report lays out the patio door numbers for Norwich, CT line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Patio door in Norwich: your questions
+How much does it cost to install a patio door in Norwich?
For 1 door, expect $610 to $6,150 in the Norwich area. A standard-spec job lands at $2,250 to $4,500. Small jobs usually cost more per door and large ones less.
+What is the price per door for patio door in Norwich?
About $606 to $6,165 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $600 to $6,000.
+Is patio door cheaper in Norwich or Hartford?
Hartford is 25 miles away. The midpoint for 1 door there is $3,450, which is 2% more than Norwich ($3,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Norwich?
About 51% at the midpoint, or $1,750 out of $3,400. Materials are 49% and permits 0%. Nationally, labor is 48%.
+What would two doors cost in Norwich?
$1,200 to $12,300. Pick a different size in the estimator above to get your own number.
+Does patio door need a permit in Norwich?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Norwich area (our national range of $0 to $0 scaled by the local price level).
+Is Norwich expensive for patio door compared with the rest of Connecticut?
Norwich is 0% below the Connecticut statewide estimate ($3,400 at the midpoint). We cover 5 metros in Connecticut; see the state page to compare them.
+What do carpenters earn in Norwich?
The BLS median is $31.01 an hour in the Norwich area, compared with $29.12 nationally. The 25th to 75th percentile range is $25.21 to $37.99.
+What do basic and premium patio door work cost in Norwich?
For 1 door, basic work runs $610 to $2,850 and premium work $3,950 to $6,150. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.
+When is the best time to install a patio door in Norwich?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. May and July are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Patio door near Norwich
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does It Cost to Install or Replace Patio Doors? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.