Patio door cost in Hartford, CT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $620 – $6,300
- Per door
- $615 – $6,310
- before permit
- Versus US midpoint
- +5%
- US $3,300
- Rank of 300 metros
- #55
- 1 = most expensive
Local price for a patio door in the Hartford area: $620 to $6,300 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 5% higher than the US figure. Carpenters earn a median of $31.14 an hour in the Hartford area, 7% above the US median of $29.12.
Estimate your patio door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Hartford, CT, standard level
$2,300 to $4,600
About $2,324 to $4,602 per door before permits. Labor is about 52% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $2,150 |
| Labor | $1,200 | $2,450 |
| Permits and fees | $0 | $0 |
| Total | $2,300 | $4,600 |
Cost breakdown for 1 door in Hartford, CT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $390 | $1,650 | $2,900 | 48% |
| Labor | $230 | $1,800 | $3,400 | 52% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $620 | $3,450 | $6,300 | 100% |
Why Hartford prices look the way they do
We price the labor side from BLS wage data for 3 trades: carpenters at 60%, glaziers at 30%, general maintenance and repair workers at 10%. Weighted together, Hartford wages are 1.13 times the national level. Labor makes up about 52% of the midpoint estimate (48% at national prices).
Materials are scaled with BEA's regional price parity for goods. Hartford is at 97.3 against 100 for the US, so a materials line of $1,700 nationally becomes $1,650 here (midpoint, 1 door). Permits follow the all-items index of 102.7: $0 to $0.
Specs and site conditions that change a Hartford bid
Door type
Sliding glass doors run $1,200-$4,000 installed; exterior French doors $1,300-$5,500; telescoping doors $1,500-$5,000 (HomeGuide).
New opening versus replacement
Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.
Old door removal
Removing and disposing of the old door is $100-$500 extra.
Hartford against nearby metros and the rest of Connecticut
Same job, same size (1 door), priced for the nearest metros. Amherst is the priciest of the group at $3,700. Waterbury is the cheapest at $3,350.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Hartford, CTthis page | $620 – $6,300 | $3,450 | |
| Norwich, CT25 miles | $610 – $6,150 | $3,400 | −2% |
| Waterbury, CT30 miles | $600 – $6,050 | $3,350 | −4% |
| Springfield, MA30 miles | $650 – $6,800 | $3,700 | +7% |
| New Haven, CT30 miles | $610 – $6,200 | $3,400 | −1% |
| Amherst, MA45 miles | $650 – $6,800 | $3,700 | +8% |
| Connecticut (statewide) | $610 – $6,200 | $3,400 | −2% |
| United States | $600 – $6,000 | $3,300 | −5% |
Out of the 300 metros we cover, Hartford ranks #55 for the cost of this job (#1 is the most expensive). Statewide, Hartford is 2% above the Connecticut figure.
Elsewhere in Connecticut
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bridgeport, CT | 404,180 jobs | $610 – $6,150 | $3,400 | −2% |
| New Haven, CT | 281,410 jobs | $610 – $6,200 | $3,400 | −1% |
| Waterbury, CT | 160,710 jobs | $600 – $6,050 | $3,350 | −4% |
| Norwich, CT | 126,450 jobs | $610 – $6,150 | $3,400 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Hartford against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Memphis, TN | 611,670 jobs | $560 – $5,450 | $3,000 | −13% |
| Grand Rapids, MI | 598,260 jobs | $560 – $5,600 | $3,100 | −11% |
| Richmond, VA | 660,350 jobs | $570 – $5,650 | $3,100 | −10% |
| Buffalo, NY | 534,550 jobs | $610 – $6,150 | $3,350 | −3% |
Planning more than one job in Hartford?
Jobs that often go together with patio door are priced below at their usual sizes, using the same Hartford wage and price inputs. Compared with national midpoints, wood deck comes out highest (+3%) and front door lowest (level); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Window replacement | 10 windows | $4,700 – $15,300 | +3% |
| Front door | 1 door | $520 – $2,500 | level |
| Storm door | 1 door | $360 – $970 | +2% |
| Wood deck | 300 sq ft | $7,750 – $15,600 | +3% |
| Garage door | 1 door | $730 – $3,750 | +2% |
The best months for patio door in Hartford
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Hartford Brainard Fld (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Hartford are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Hartford gets about 43 inches of precipitation in a normal year. The wettest months are June, September and October (4.2 inches in October). Inside the workable window, May and November are the driest, at 3.4 and 3.4 inches. The station averages about 17 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 37 | 20 | 2.9 | Cold |
| Feb | 40 | 22 | 2.6 | Cold |
| Mar | 48 | 30 | 3.5 | Workable |
| Apr | 60 | 40 | 3.8 | Workable |
| May | 71 | 50 | 3.4 | Workable |
| Jun | 80 | 60 | 3.9 | Workable |
| Jul | 85 | 66 | 3.9 | Workable |
| Aug | 83 | 64 | 3.5 | Workable |
| Sep | 76 | 56 | 4.0 | Workable |
| Oct | 64 | 44 | 4.2 | Workable |
| Nov | 52 | 35 | 3.4 | Workable |
| Dec | 42 | 26 | 3.8 | Cold |
Cost by quality level and size in Hartford
The cited range is split into basic, standard and premium bands, then scaled to Hartford. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one sliding door to two doors.
Basic
$620 to $2,900
Standard vinyl slider, same opening
Standard
$2,300 to $4,600
Wider slider or French door with better glass
Premium
$4,050 to $6,300
Multi-panel or custom door, new opening
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one sliding door | $620 – $2,900 | $2,300 – $4,600 | $4,050 – $6,300 |
| two doors | $1,250 – $5,800 | $4,650 – $9,200 | $8,050 – $12,600 |
Who does the work: Hartford trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Hartford the blend is 1.13.
Carpenters (47-2031), 60% of the weighting: a median of $31.14 an hour, 7% above the US median of $29.12. The middle half of them earn between $28.29 and $40.07 an hour. About 1,660 work in the metro. That is 27.7 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
Glaziers (47-2121), 30% of the weighting: a median of $33.86 an hour, 23% above the US median of $27.44. The middle half of them earn between $28.67 and $38.89 an hour. About 280 work in the metro. That is 4.7 per 10,000 jobs, compared with 3.8 nationally, which suggests plenty of local crews to bid.
For general maintenance and repair workers (49-9071, weighted 10%) the local median is $28.21 an hour, which is 18% above the national $23.84. The middle half of them earn between $22.06 and $35.22 an hour. BLS counts 4,020 of them working in the area, 67.0 for every 10,000 jobs (US: 98.4), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $290 to the midpoint estimate; the 25th percentile takes off about $95. That is a swing of roughly 2.7% to 8.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Hartford-West Hartford-East Hartford has 599,770 jobs in total (BLS, May 2025), ranking 47th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $28.29 | $31.14 | $40.07 | $29.12 | 1.07 | metro |
| Glaziers (47-2121) | 30% | $28.67 | $33.86 | $38.89 | $27.44 | 1.23 | metro |
| General maintenance and repair workers (49-9071) | 10% | $22.06 | $28.21 | $35.22 | $23.84 | 1.18 | metro |
| Blended | 100% | 1.13 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,300 to $4,600 for Hartford, CT is attached.
Take this estimate with you: PDF report, $9
The report lays out the patio door numbers for Hartford, CT line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Patio door in Hartford: your questions
+How much does it cost to install a patio door in Hartford?
For 1 door, expect $620 to $6,300 in the Hartford area. A standard-spec job lands at $2,300 to $4,600. Small jobs usually cost more per door and large ones less.
+What is the price per door for patio door in Hartford?
About $615 to $6,310 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $600 to $6,000.
+Is patio door cheaper in Hartford or Norwich?
Norwich is 25 miles away. The midpoint for 1 door there is $3,400, which is 2% less than Hartford ($3,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Hartford?
About 52% at the midpoint, or $1,800 out of $3,450. Materials are 48% and permits 0%. Nationally, labor is 48%.
+What would two doors cost in Hartford?
$1,250 to $12,600. Pick a different size in the estimator above to get your own number.
+Does patio door need a permit in Hartford?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Hartford area (our national range of $0 to $0 scaled by the local price level).
+Is Hartford expensive for patio door compared with the rest of Connecticut?
Hartford is 2% above the Connecticut statewide estimate ($3,400 at the midpoint). We cover 5 metros in Connecticut; see the state page to compare them.
+What do carpenters earn in Hartford?
The BLS median is $31.14 an hour in the Hartford area, compared with $29.12 nationally. The 25th to 75th percentile range is $28.29 to $40.07.
+What do basic and premium patio door work cost in Hartford?
For 1 door, basic work runs $620 to $2,900 and premium work $4,050 to $6,300. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.
+When is the best time to install a patio door in Hartford?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. May and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Patio door near Hartford
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does It Cost to Install or Replace Patio Doors? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.