Metal roof cost in Killeen, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,000 sq ft of roof)
- $8,600 – $28,600
- Per sq ft of roof
- $4.25 – $14
- before permit
- Versus US midpoint
- −13%
- US $21,300
- Rank of 300 metros
- #281
- 1 = most expensive
If you want to install a metal roof in Killeen, plan on $8,600 to $28,600 for 2,000 sq ft of roof, all in. Per sq ft of roof, that is $4.25 to $14 for materials and labor, with the permit on top. The local midpoint runs 13% lower than the national one. Roofers earn a median of $22.13 an hour in the Killeen area, 17% below the US median of $26.65.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Killeen, TX, standard level
$14,600 to $22,600
About $7.20 to $11 per sq ft of roof before permits. Labor is about 53% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $5,800 | $11,100 |
| Labor | $8,550 | $11,200 |
| Permits and fees | $230 | $360 |
| Total | $14,600 | $22,600 |
Cost breakdown for 2,000 sq ft of roof in Killeen, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $8,450 | $15,000 | 45% |
| Labor | $6,600 | $9,900 | $13,200 | 53% |
| Permits and fees | $140 | $300 | $460 | 2% |
| Total | $8,600 | $18,600 | $28,600 | 100% |
What is behind the Killeen number
We price the labor side from BLS wage data for 3 trades: roofers at 70%, sheet metal workers at 20%, construction laborers at 10%. Weighted together, Killeen wages are 0.82 times the national level. Labor makes up about 53% of the midpoint estimate (56% at national prices). BLS does not publish this trade for the metro, so we used the Texas statewide median.
On the materials line, the BEA goods price index for the Killeen metro is 93.8 (US = 100). The midpoint materials bill for 2,000 sq ft of roof comes to $8,450, compared with $9,000 at national prices. Permit and inspection fees are scaled by the broader index (91.1) and land at $140 to $460.
Data note: 70% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Killeen. The wage table below marks each row.
Killeen against nearby metros and the rest of Texas
Of the five closest metros, 1 is cheaper than Killeen. San Antonio is the lowest at about $18,600 (midpoint, 2,000 sq ft of roof), 130 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Killeen, TXthis page | $8,600 – $28,600 | $18,600 | |
| Waco, TX40 miles | $9,000 – $29,500 | $19,200 | +3% |
| Austin, TX65 miles | $9,200 – $29,800 | $19,500 | +5% |
| College Station, TX85 miles | $8,700 – $28,800 | $18,800 | +1% |
| Dallas, TX125 miles | $9,150 – $30,900 | $20,000 | +7% |
| San Antonio, TX130 miles | $8,600 – $28,600 | $18,600 | level |
| Texas (statewide) | $8,850 – $29,700 | $19,300 | +3% |
| United States | $10,200 – $32,500 | $21,300 | +14% |
Across 300 US metros, Killeen comes in at #281 from the top. The priciest is Worcester, MA at $29,600; the cheapest is Lubbock, TX at $17,000 (midpoints, 2,000 sq ft of roof). Statewide, Killeen is 3% below the Texas figure.
Other Texas metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $9,150 – $30,900 | $20,000 | +7% |
| Houston, TX | 3,289,720 jobs | $8,800 – $29,900 | $19,300 | +4% |
| Austin, TX | 1,293,690 jobs | $9,200 – $29,800 | $19,500 | +5% |
| San Antonio, TX | 1,126,880 jobs | $8,600 – $28,600 | $18,600 | level |
| El Paso, TX | 339,120 jobs | $7,600 – $26,600 | $17,100 | −8% |
| McAllen, TX | 296,700 jobs | $8,400 – $28,300 | $18,300 | −2% |
Cities with a workforce like Killeen's
Big cities and small ones price differently, so here is Killeen against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Gainesville, FL | 152,670 jobs | $8,650 – $29,000 | $18,800 | +1% |
| Fargo, ND | 148,660 jobs | $11,200 – $34,000 | $22,600 | +21% |
| Roanoke, VA | 153,980 jobs | $8,600 – $29,000 | $18,800 | +1% |
| Myrtle Beach, SC | 146,260 jobs | $8,650 – $29,000 | $18,800 | +1% |
Why two Killeen quotes can differ
Panel type
Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).
Metal and gauge
Galvalume and galvanized steel are budget-friendly; copper and zinc are the top of the range.
Labor
Metal roof labor is $4-$8 per sq ft, or $400-$800 per roofing square, and standing seam needs specialist crews.
Climate in Killeen: timing your metal roof job
We use NOAA's 1991-2020 climate normals for Killeen (5 miles from the city center). These are 30-year monthly averages, not forecasts.
October through May is the stretch where exterior installation runs into the fewest weather problems in Killeen (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.
Killeen gets about 35 inches of precipitation in a normal year. The wettest months are May, September and October (4.7 inches in May). Inside the workable window, February and April are the driest, at 2.2 and 2.1 inches. The station averages about 105 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 60 | 36 | 2.5 | Workable |
| Feb | 63 | 40 | 2.2 | Workable |
| Mar | 70 | 47 | 3.3 | Workable |
| Apr | 77 | 54 | 2.1 | Workable |
| May | 84 | 63 | 4.7 | Workable |
| Jun | 92 | 70 | 3.2 | Hot |
| Jul | 96 | 72 | 2.7 | Hot |
| Aug | 97 | 73 | 1.6 | Hot |
| Sep | 90 | 67 | 3.9 | Hot |
| Oct | 80 | 56 | 3.4 | Workable |
| Nov | 69 | 46 | 2.7 | Workable |
| Dec | 60 | 38 | 2.4 | Workable |
Cost by quality level and size in Killeen
Three bands are cut from the same cited range and localized for Killeen wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$8,600 to $16,600
Corrugated or exposed-fastener steel panels
Standard
$14,600 to $22,600
Standing seam steel
Premium
$20,600 to $28,600
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $5,200 – $10,100 | $8,850 – $13,700 | $12,500 – $17,400 |
| average (2,000 sq ft of roof) | $8,600 – $16,600 | $14,600 – $22,600 | $20,600 – $28,600 |
| large (2,800 sq ft of roof) | $12,000 – $23,200 | $20,400 – $31,500 | $28,800 – $39,900 |
Killeen labor market for metal roof
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Killeen is 0.82 times the national level.
Roofers (47-2181) carry 70% of the labor weighting. BLS does not publish this trade for the Killeen metro, so we used the Texas statewide median: $22.13 an hour against $26.65 for the US. The middle half of them earn between $18.00 and $25.78 an hour.
For sheet metal workers (47-2211, weighted 20%) the local median is $24.24 an hour, which is 18% below the national $29.71. The middle half of them earn between $21.35 and $26.59 an hour. BLS counts 50 of them working in the area, 3.3 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Construction laborers (47-2061), 10% of the weighting: a median of $18.12 an hour, 20% below the US median of $22.66. The middle half of them earn between $17.28 and $22.05 an hour. About 940 work in the metro. That is 62.4 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the roofers on your job are paid at the 75th percentile ($25.78 an hour) instead of the median, the labor line grows by about $1,150. At the 25th percentile ($18.00) it shrinks by about $1,300. The total moves by 6.2% or 7.0%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 150,580 jobs in the Killeen-Temple area. That makes it the 155th largest of the 300 metros we cover, with 0.10% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $18.00 | $22.13 | $25.78 | $26.65 | 0.83 | state |
| Sheet metal workers (47-2211) | 20% | $21.35 | $24.24 | $26.59 | $29.71 | 0.82 | metro |
| Construction laborers (47-2061) | 10% | $17.28 | $18.12 | $22.05 | $22.66 | 0.80 | metro |
| Blended | 100% | 0.82 | |||||
Related projects, priced for Killeen
Because every project leans on different trades, Killeen's wage level does not move all prices equally. Against the US midpoint, attic insulation runs −6% and vinyl siding −13%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,200 – $10,900 | −13% |
| Gutters | 160 linear ft | $1,100 – $3,750 | −11% |
| Attic insulation | 1,000 sq ft | $950 – $3,750 | −6% |
| Vinyl siding | 2,100 sq ft of wall | $7,250 – $21,800 | −13% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $14,600 to $22,600 for Killeen, TX is attached.
Detailed metal roof report for Killeen, TX, $9
The report lays out the metal roof numbers for Killeen, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Killeen: your questions
+How much does it cost to install a metal roof in Killeen?
For 2,000 sq ft of roof, expect $8,600 to $28,600 in the Killeen area. A standard-spec job lands at $14,600 to $22,600. Small jobs usually cost more per sq ft of roof and large ones less.
+What is the price per sq ft of roof for metal roof in Killeen?
About $4.25 to $14 per sq ft of roof for materials and labor, plus $140 to $460 for the permit if one is needed. The US range is $5 to $16.
+Is metal roof cheaper in Killeen or Waco?
Waco is 40 miles away. The midpoint for 2,000 sq ft of roof there is $19,200, which is 3% more than Killeen ($18,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Killeen?
About 53% at the midpoint, or $9,900 out of $18,600. Materials are 45% and permits 2%. Nationally, labor is 56%.
+What would average (2,000 sq ft of roof) cost in Killeen?
$8,600 to $28,600. Pick a different size in the estimator above to get your own number.
+Does metal roof need a permit in Killeen?
Often, but rules are set by your city or county building office, so call before you hire. Budget $140 to $460 for fees in the Killeen area (our national range of $150 to $500 scaled by the local price level).
+Is Killeen expensive for metal roof compared with the rest of Texas?
Killeen is 3% below the Texas statewide estimate ($19,300 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do roofers earn in Killeen?
BLS has no published metro figure here, so we use the statewide median of $22.13 an hour, compared with $26.65 nationally. The 25th to 75th percentile range is $18.00 to $25.78.
+What do basic and premium metal roof work cost in Killeen?
For 2,000 sq ft of roof, basic work runs $8,600 to $16,600 and premium work $20,600 to $28,600. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+When is the best time to install a metal roof in Killeen?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. February and April are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Metal roof near Killeen
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.