Metal roof cost in Chambersburg, PA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,000 sq ft of roof)
- $11,100 – $34,400
- Per sq ft of roof
- $5.45 – $17
- before permit
- Versus US midpoint
- +7%
- US $21,300
- Rank of 300 metros
- #64
- 1 = most expensive
If you want to install a metal roof in Chambersburg, plan on $11,100 to $34,400 for 2,000 sq ft of roof, all in. Per sq ft of roof, that is $5.45 to $17 for materials and labor, with the permit on top. The local midpoint runs 7% higher than the national one. Roofers earn a median of $31.00 an hour in the Chambersburg area, 16% above the US median of $26.65.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Chambersburg, PA, standard level
$18,100 to $27,400
About $8.90 to $13.50 per sq ft of roof before permits. Labor is about 59% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,250 | $11,900 |
| Labor | $11,600 | $15,100 |
| Permits and fees | $240 | $370 |
| Total | $18,100 | $27,400 |
Cost breakdown for 2,000 sq ft of roof in Chambersburg, PA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,000 | $9,050 | $16,100 | 40% |
| Labor | $8,900 | $13,300 | $17,800 | 59% |
| Permits and fees | $140 | $310 | $470 | 1% |
| Total | $11,100 | $22,700 | $34,400 | 100% |
Why Chambersburg prices look the way they do
Labor is 59% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is roofers (70%), sheet metal workers (20%), construction laborers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Chambersburg the blended ratio comes out at 1.11.
On the materials line, the BEA goods price index for the Chambersburg metro is 100.7 (US = 100). The midpoint materials bill for 2,000 sq ft of roof comes to $9,050, compared with $9,000 at national prices. Permit and inspection fees are scaled by the broader index (94.6) and land at $140 to $470.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Chambersburg. The wage table below marks each row.
Cost by quality level and size in Chambersburg
Three bands are cut from the same cited range and localized for Chambersburg wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$11,100 to $20,400
Corrugated or exposed-fastener steel panels
Standard
$18,100 to $27,400
Standing seam steel
Premium
$25,100 to $34,400
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $6,700 – $12,300 | $10,900 – $16,600 | $15,200 – $20,800 |
| average (2,000 sq ft of roof) | $11,100 – $20,400 | $18,100 – $27,400 | $25,100 – $34,400 |
| large (2,800 sq ft of roof) | $15,400 – $28,400 | $25,200 – $38,200 | $34,900 – $47,900 |
Planning more than one job in Chambersburg?
Because every project leans on different trades, Chambersburg's wage level does not move all prices equally. Against the US midpoint, roof replacement runs +9% and vinyl siding −6%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,700 – $13,500 | +9% |
| Gutters | 160 linear ft | $1,300 – $4,250 | +2% |
| Attic insulation | 1,000 sq ft | $1,000 – $4,050 | +1% |
| Vinyl siding | 2,100 sq ft of wall | $7,950 – $23,800 | −6% |
Chambersburg labor market for metal roof
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Chambersburg is 1.11 times the national level.
For roofers (47-2181, weighted 70%) the local median is $31.00 an hour, which is 16% above the national $26.65. The middle half of them earn between $21.70 and $31.00 an hour. BLS counts 70 of them working in the area, 11.6 for every 10,000 jobs (US: 8.7), so the local bench is deeper than average.
Sheet metal workers (47-2211) carry 20% of the labor weighting. BLS does not publish this trade for the Chambersburg metro, so we used the Pennsylvania statewide median: $29.52 an hour against $29.71 for the US. The middle half of them earn between $24.35 and $42.12 an hour.
Construction laborers (47-2061), 10% of the weighting: a median of $22.53 an hour, in line with the US median of $22.66. The middle half of them earn between $19.13 and $24.90 an hour. About 440 work in the metro. That is 73.0 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the roofers on your job are paid at the 75th percentile ($31.00 an hour) instead of the median, the labor line grows by about $0. At the 25th percentile ($21.70) it shrinks by about $2,950. The total moves by 0.0% or 12.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 60,280 jobs in the Chambersburg area. That makes it the 287th largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $21.70 | $31.00 | $31.00 | $26.65 | 1.16 | metro |
| Sheet metal workers (47-2211) | 20% | $24.35 | $29.52 | $42.12 | $29.71 | 0.99 | state |
| Construction laborers (47-2061) | 10% | $19.13 | $22.53 | $24.90 | $22.66 | 0.99 | metro |
| Blended | 100% | 1.11 | |||||
Chambersburg against nearby metros and the rest of Pennsylvania
Of the five closest metros, all are cheaper than Chambersburg. Winchester is the lowest at about $18,800 (midpoint, 2,000 sq ft of roof), 60 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Chambersburg, PAthis page | $11,100 – $34,400 | $22,700 | |
| Hagerstown, MD30 miles | $10,500 – $32,700 | $21,600 | −5% |
| Harrisburg, PA45 miles | $9,800 – $31,900 | $20,800 | −8% |
| Altoona, PA50 miles | $8,950 – $30,100 | $19,500 | −14% |
| York, PA55 miles | $9,950 – $32,200 | $21,100 | −7% |
| Winchester, VA60 miles | $8,550 – $28,900 | $18,800 | −17% |
| Pennsylvania (statewide) | $10,200 – $32,500 | $21,300 | −6% |
| United States | $10,200 – $32,500 | $21,300 | −6% |
Across 300 US metros, Chambersburg comes in at #64 from the top. The priciest is Worcester, MA at $29,600; the cheapest is Lubbock, TX at $17,000 (midpoints, 2,000 sq ft of roof). Statewide, Chambersburg is 6% above the Pennsylvania figure.
Other Pennsylvania metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $11,100 – $33,900 | $22,500 | −1% |
| Pittsburgh, PA | 1,114,490 jobs | $9,800 – $31,900 | $20,800 | −8% |
| Allentown, PA | 377,180 jobs | $10,600 – $33,400 | $22,000 | −3% |
| Harrisburg, PA | 335,010 jobs | $9,800 – $31,900 | $20,800 | −8% |
| Scranton, PA | 255,620 jobs | $9,700 – $31,600 | $20,600 | −9% |
| Lancaster, PA | 252,230 jobs | $9,850 – $32,000 | $20,900 | −8% |
Cities with a workforce like Chambersburg's
Big cities and small ones price differently, so here is Chambersburg against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Jonesboro, AR | 60,620 jobs | $8,550 – $28,500 | $18,500 | −18% |
| Alexandria, LA | 60,000 jobs | $8,850 – $29,100 | $19,000 | −16% |
| Sheboygan, WI | 60,630 jobs | $11,000 – $33,500 | $22,200 | −2% |
| Niles, MI | 59,970 jobs | $10,300 – $32,000 | $21,100 | −7% |
Climate in Chambersburg: timing your metal roof job
We use NOAA's 1991-2020 climate normals for Chambersburg 1 Ese (in the city). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Chambersburg (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Chambersburg gets about 44 inches of precipitation in a normal year, including roughly 31 inches of snow. The wettest months are May, June and September (4.1 inches in September). Inside the workable window, October and November are the driest, at 3.5 and 3.1 inches. The station averages about 19 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 37 | 23 | 3.2 | Cold |
| Feb | 41 | 25 | 2.6 | Cold |
| Mar | 50 | 32 | 3.6 | Workable |
| Apr | 63 | 42 | 4.0 | Workable |
| May | 73 | 52 | 4.1 | Workable |
| Jun | 81 | 61 | 4.1 | Workable |
| Jul | 85 | 65 | 3.8 | Workable |
| Aug | 83 | 63 | 3.8 | Workable |
| Sep | 76 | 56 | 4.1 | Workable |
| Oct | 64 | 45 | 3.5 | Workable |
| Nov | 52 | 35 | 3.1 | Workable |
| Dec | 41 | 27 | 3.5 | Cold |
Metal roof: what moves the price in Chambersburg
Other metals
Tin runs $600-$1,800 per roofing square (100 sq ft) installed and aluminum $700-$1,700 per square (HomeGuide).
Panel type
Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).
Metal and gauge
Galvalume and galvanized steel are budget-friendly; copper and zinc are the top of the range.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $18,100 to $27,400 for Chambersburg, PA is attached.
A detailed PDF report of this estimate, $9
The report lays out the metal roof numbers for Chambersburg, PA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Chambersburg: your questions
+How much does it cost to install a metal roof in Chambersburg?
For 2,000 sq ft of roof, expect $11,100 to $34,400 in the Chambersburg area. A standard-spec job lands at $18,100 to $27,400. Small jobs usually cost more per sq ft of roof and large ones less.
+What is the price per sq ft of roof for metal roof in Chambersburg?
About $5.45 to $17 per sq ft of roof for materials and labor, plus $140 to $470 for the permit if one is needed. The US range is $5 to $16.
+Is metal roof cheaper in Chambersburg or Hagerstown?
Hagerstown is 30 miles away. The midpoint for 2,000 sq ft of roof there is $21,600, which is 5% less than Chambersburg ($22,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Chambersburg?
About 59% at the midpoint, or $13,300 out of $22,700. Materials are 40% and permits 1%. Nationally, labor is 56%.
+What would average (2,000 sq ft of roof) cost in Chambersburg?
$11,100 to $34,400. Pick a different size in the estimator above to get your own number.
+Does metal roof need a permit in Chambersburg?
Often, but rules are set by your city or county building office, so call before you hire. Budget $140 to $470 for fees in the Chambersburg area (our national range of $150 to $500 scaled by the local price level).
+Is Chambersburg expensive for metal roof compared with the rest of Pennsylvania?
Chambersburg is 6% above the Pennsylvania statewide estimate ($21,300 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.
+What do roofers earn in Chambersburg?
The BLS median is $31.00 an hour in the Chambersburg area, compared with $26.65 nationally. The 25th to 75th percentile range is $21.70 to $31.00.
+What do basic and premium metal roof work cost in Chambersburg?
For 2,000 sq ft of roof, basic work runs $11,100 to $20,400 and premium work $25,100 to $34,400. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+When is the best time to install a metal roof in Chambersburg?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Metal roof near Chambersburg
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.