Metal roof cost in Asheville, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,000 sq ft of roof)
- $9,250 – $30,300
- Per sq ft of roof
- $4.55 – $15
- before permit
- Versus US midpoint
- −7%
- US $21,300
- Rank of 300 metros
- #162
- 1 = most expensive
If you want to install a metal roof in Asheville, plan on $9,250 to $30,300 for 2,000 sq ft of roof, all in. Per sq ft of roof, that is $4.55 to $15 for materials and labor, with the permit on top. The local midpoint runs 7% lower than the national one. Roofers earn a median of $23.89 an hour in the Asheville area, 10% below the US median of $26.65.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Asheville, NC, standard level
$15,600 to $24,000
About $7.65 to $12 per sq ft of roof before permits. Labor is about 54% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,000 | $11,400 |
| Labor | $9,300 | $12,200 |
| Permits and fees | $250 | $380 |
| Total | $15,600 | $24,000 |
Cost breakdown for 2,000 sq ft of roof in Asheville, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,950 | $8,700 | $15,500 | 44% |
| Labor | $7,150 | $10,800 | $14,300 | 54% |
| Permits and fees | $140 | $310 | $480 | 2% |
| Total | $9,250 | $19,800 | $30,300 | 100% |
Where the Asheville price comes from
The wage side of the estimate leans on roofers, who do 70% of the hours on a typical job. Their local median is $23.89 an hour. Add the other trades involved and the blended wage index for Asheville is 0.90 (US = 1.00), which puts labor at 54% of the total.
On the materials line, the BEA goods price index for the Asheville metro is 96.6 (US = 100). The midpoint materials bill for 2,000 sq ft of roof comes to $8,700, compared with $9,000 at national prices. Permit and inspection fees are scaled by the broader index (96.5) and land at $140 to $480.
What nearby projects cost in Asheville
Because every project leans on different trades, Asheville's wage level does not move all prices equally. Against the US midpoint, gutters runs −6% and vinyl siding −7%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,650 – $11,700 | −7% |
| Gutters | 160 linear ft | $1,200 – $3,950 | −6% |
| Attic insulation | 1,000 sq ft | $930 – $3,800 | −6% |
| Vinyl siding | 2,100 sq ft of wall | $7,800 – $23,400 | −7% |
Asheville labor market for metal roof
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Asheville is 0.90 times the national level.
For roofers (47-2181, weighted 70%) the local median is $23.89 an hour, which is 10% below the national $26.65. The middle half of them earn between $21.50 and $26.29 an hour. BLS counts 110 of them working in the area, 6.1 for every 10,000 jobs (US: 8.7), so the local bench is thinner than average.
For sheet metal workers (47-2211, weighted 20%) the local median is $24.90 an hour, which is 16% below the national $29.71. The middle half of them earn between $22.16 and $30.31 an hour. BLS counts 110 of them working in the area, 6.1 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Construction laborers (47-2061), 10% of the weighting: a median of $22.85 an hour, in line with the US median of $22.66. The middle half of them earn between $18.46 and $23.75 an hour. About 1,340 work in the metro. That is 74.2 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the roofers on your job are paid at the 75th percentile ($26.29 an hour) instead of the median, the labor line grows by about $760. At the 25th percentile ($21.50) it shrinks by about $750. The total moves by 3.8% or 3.8%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 180,620 jobs in the Asheville area. That makes it the 127th largest of the 300 metros we cover, with 0.12% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $21.50 | $23.89 | $26.29 | $26.65 | 0.90 | metro |
| Sheet metal workers (47-2211) | 20% | $22.16 | $24.90 | $30.31 | $29.71 | 0.84 | metro |
| Construction laborers (47-2061) | 10% | $18.46 | $22.85 | $23.75 | $22.66 | 1.01 | metro |
| Blended | 100% | 0.90 | |||||
Climate in Asheville: timing your metal roof job
We use NOAA's 1991-2020 climate normals for Asheville (5 miles from the city center). These are 30-year monthly averages, not forecasts.
Weather is not a serious constraint for exterior installation in Asheville: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Asheville gets about 41 inches of precipitation in a normal year, including roughly 12 inches of snow. The wettest months are April, July and September (4.1 inches in July). The station averages about 16 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 48 | 29 | 3.3 | Workable |
| Feb | 52 | 32 | 2.9 | Workable |
| Mar | 59 | 38 | 3.5 | Workable |
| Apr | 69 | 46 | 3.7 | Workable |
| May | 76 | 54 | 3.5 | Workable |
| Jun | 83 | 61 | 3.4 | Workable |
| Jul | 86 | 65 | 4.1 | Workable |
| Aug | 85 | 64 | 3.6 | Workable |
| Sep | 79 | 58 | 3.7 | Workable |
| Oct | 69 | 47 | 2.6 | Workable |
| Nov | 59 | 37 | 3.0 | Workable |
| Dec | 51 | 32 | 3.3 | Workable |
How Asheville compares
Of the five closest metros, all are cheaper than Asheville. Kingsport is the lowest at about $18,400 (midpoint, 2,000 sq ft of roof), 70 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Asheville, NCthis page | $9,250 – $30,300 | $19,800 | |
| Johnson City, TN45 miles | $8,900 – $29,500 | $19,200 | −3% |
| Hickory, NC65 miles | $8,750 – $29,300 | $19,000 | −4% |
| Greenville, SC65 miles | $8,700 – $29,200 | $18,900 | −4% |
| Spartanburg, SC70 miles | $8,650 – $29,100 | $18,900 | −5% |
| Kingsport, TN70 miles | $8,350 – $28,500 | $18,400 | −7% |
| North Carolina (statewide) | $9,100 – $30,000 | $19,500 | −1% |
| United States | $10,200 – $32,500 | $21,300 | +8% |
Across 300 US metros, Asheville comes in at #162 from the top. The priciest is Worcester, MA at $29,600; the cheapest is Lubbock, TX at $17,000 (midpoints, 2,000 sq ft of roof). Statewide, Asheville is 1% above the North Carolina figure.
Other North Carolina metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $9,050 – $29,900 | $19,500 | −1% |
| Raleigh, NC | 743,120 jobs | $9,300 – $30,400 | $19,800 | level |
| Greensboro, NC | 365,410 jobs | $9,150 – $30,100 | $19,600 | −1% |
| Durham, NC | 344,020 jobs | $9,000 – $29,800 | $19,400 | −2% |
| Winston, NC | 271,980 jobs | $9,000 – $29,700 | $19,400 | −2% |
| Wilmington, NC | 191,280 jobs | $9,000 – $29,800 | $19,400 | −2% |
Cities with a workforce like Asheville's
Big cities and small ones price differently, so here is Asheville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lincoln, NE | 182,620 jobs | $8,950 – $29,400 | $19,200 | −3% |
| Davenport, IA | 180,450 jobs | $9,700 – $30,900 | $20,300 | +3% |
| York, PA | 183,590 jobs | $9,950 – $32,200 | $21,100 | +7% |
| Lafayette, LA | 179,570 jobs | $8,850 – $29,100 | $19,000 | −4% |
Specs and site conditions that change a Asheville bid
Other metals
Tin runs $600-$1,800 per roofing square (100 sq ft) installed and aluminum $700-$1,700 per square (HomeGuide).
Panel type
Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).
Metal and gauge
Galvalume and galvanized steel are budget-friendly; copper and zinc are the top of the range.
Asheville: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Asheville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$9,250 to $17,700
Corrugated or exposed-fastener steel panels
Standard
$15,600 to $24,000
Standing seam steel
Premium
$21,900 to $30,300
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $5,600 – $10,700 | $9,450 – $14,500 | $13,300 – $18,400 |
| average (2,000 sq ft of roof) | $9,250 – $17,700 | $15,600 – $24,000 | $21,900 – $30,300 |
| large (2,800 sq ft of roof) | $12,900 – $24,600 | $21,700 – $33,400 | $30,500 – $42,200 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $15,600 to $24,000 for Asheville, NC is attached.
A detailed PDF report of this estimate, $9
The report lays out the metal roof numbers for Asheville, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Asheville: your questions
+How much does it cost to install a metal roof in Asheville?
For 2,000 sq ft of roof, expect $9,250 to $30,300 in the Asheville area. A standard-spec job lands at $15,600 to $24,000. Small jobs usually cost more per sq ft of roof and large ones less.
+What is the price per sq ft of roof for metal roof in Asheville?
About $4.55 to $15 per sq ft of roof for materials and labor, plus $140 to $480 for the permit if one is needed. The US range is $5 to $16.
+Is metal roof cheaper in Asheville or Johnson City?
Johnson City is 45 miles away. The midpoint for 2,000 sq ft of roof there is $19,200, which is 3% less than Asheville ($19,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Asheville?
About 54% at the midpoint, or $10,800 out of $19,800. Materials are 44% and permits 2%. Nationally, labor is 56%.
+What would average (2,000 sq ft of roof) cost in Asheville?
$9,250 to $30,300. Pick a different size in the estimator above to get your own number.
+Does metal roof need a permit in Asheville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $140 to $480 for fees in the Asheville area (our national range of $150 to $500 scaled by the local price level).
+Is Asheville expensive for metal roof compared with the rest of North Carolina?
Asheville is 1% above the North Carolina statewide estimate ($19,500 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do roofers earn in Asheville?
The BLS median is $23.89 an hour in the Asheville area, compared with $26.65 nationally. The 25th to 75th percentile range is $21.50 to $26.29.
+What do basic and premium metal roof work cost in Asheville?
For 2,000 sq ft of roof, basic work runs $9,250 to $17,700 and premium work $21,900 to $30,300. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+Is there a bad season to install a metal roof in Asheville?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
Metal roof near Asheville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.