Skip to content
CostLocal

Laminate flooring cost in Janesville, WI

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (500 sq ft)
$2,050 – $7,050
Per sq ft
$4.10 – $14
before permit
Versus US midpoint
+1%
US $4,500
Rank of 300 metros
#74
1 = most expensive

Local price for a laminate floor in the Janesville area: $2,050 to $7,050 for 500 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Floor layers (except carpet, wood and hard tiles) earn a median of $25.42 an hour in the Janesville area, 6% below the US median of $27.15.

Estimate your laminate flooring cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Thicker waterproof laminate, standard trim

Estimated cost for 500 sq ft in Janesville, WI, standard level

$3,550 to $5,550

About $7.10 to $11 per sq ft before permits. Labor is about 64% of the bill.

Cost breakdown
PartLowHigh
Materials$1,150$2,100
Labor$2,400$3,450
Permits and fees$0$0
Total$3,550$5,550
Save and get a PDF report

Cost breakdown for 500 sq ft in Janesville, WI

Part of the jobLowMidpointHighShare
Materials$470$1,650$2,80036%
Labor$1,600$2,900$4,25064%
Permits and fees$0$0$00%
Total$2,050$4,550$7,050100%

Why Janesville prices look the way they do

We price the labor side from BLS wage data for 2 trades: floor layers (except carpet, wood and hard tiles) at 60%, carpenters at 40%. Weighted together, Janesville wages are 1.06 times the national level. Labor makes up about 64% of the midpoint estimate (61% at national prices). BLS does not publish this trade for the metro, so we used the Wisconsin statewide median.

Materials are scaled with BEA's regional price parity for goods. Janesville is at 93.8 against 100 for the US, so a materials line of $1,750 nationally becomes $1,650 here (midpoint, 500 sq ft). Permits follow the all-items index of 93.7: $0 to $0.

Data note: 60% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Janesville. The wage table below marks each row.

Planning more than one job in Janesville?

Jobs that often go together with laminate floor are priced below at their usual sizes, using the same Janesville wage and price inputs. Compared with national midpoints, bathroom remodel comes out highest (+6%) and kitchen remodel lowest (−1%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Hardwood flooring500 sq ft$5,700 – $12,800+3%
Tile flooring200 sq ft$2,650 – $9,950+2%
Kitchen remodel120 sq ft$18,400 – $31,200−1%
Bathroom remodel45 sq ft$5,000 – $24,800+6%

Specs and site conditions that change a Janesville bid

  • Brand

    Name-brand laminate such as Pergo runs $5-$17 per sq ft installed.

  • Floating versus glued

    Click-lock or floating laminate is the easiest and cheapest to install (HomeGuide).

  • Trim

    Baseboards run $6-$9 per linear foot and are a common add-on.

Is Janesville cheap or dear? The local comparison

Same job, same size (500 sq ft), priced for the nearest metros. Janesville is the priciest of the group. Racine is the cheapest at $4,100.

Comparison with nearby areas
AreaRangeMidpointvs. here
Janesville, WIthis page$2,050 – $7,050$4,550
Rockford, IL25 miles$2,000 – $6,850$4,400−3%
Madison, WI40 miles$1,900 – $6,600$4,250−7%
Kenosha, WI60 miles$1,950 – $7,000$4,500−1%
Milwaukee, WI65 miles$1,950 – $6,750$4,350−5%
Racine, WI65 miles$1,800 – $6,400$4,100−10%
Wisconsin (statewide)$1,950 – $6,700$4,300−5%
United States$2,000 – $7,000$4,500−1%

Out of the 300 metros we cover, Janesville ranks #74 for the cost of this job (#1 is the most expensive). Statewide, Janesville is 6% above the Wisconsin figure.

Elsewhere in Wisconsin

Wisconsin metros compared with Janesville
MetroSizeRangeMidpointvs. here
Milwaukee, WI820,780 jobs$1,950 – $6,750$4,350−5%
Madison, WI408,070 jobs$1,900 – $6,600$4,250−7%
Green Bay, WI174,550 jobs$2,050 – $7,000$4,500−1%
Appleton, WI124,230 jobs$1,950 – $6,700$4,300−5%
Oshkosh, WI93,750 jobs$2,150 – $7,300$4,700+4%
Eau Claire, WI86,060 jobs$1,900 – $6,600$4,250−6%

Metros of a similar size

Big cities and small ones price differently, so here is Janesville against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Lexington Park, MD70,650 jobs$1,900 – $6,700$4,300−6%
Wausau, WI69,530 jobs$1,800 – $6,400$4,100−10%
Bismarck, ND71,270 jobs$1,800 – $6,350$4,050−11%
Yuma, AZ68,880 jobs$1,650 – $6,050$3,850−15%

Janesville: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Janesville. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one room (200 sq ft) to whole house (1,200 sq ft).

Basic

$2,050 to $4,050

Basic click-lock laminate on a flat subfloor

Standard

$3,550 to $5,550

Thicker waterproof laminate, standard trim

Premium

$5,050 to $7,050

Premium or brand-name laminate, subfloor repair

Cost by size and quality level
SizeBasicStandardPremium
one room (200 sq ft)$820 – $1,600$1,400 – $2,200$2,000 – $2,800
main floor (500 sq ft)$2,050 – $4,050$3,550 – $5,550$5,050 – $7,050
whole house (1,200 sq ft)$4,950 – $9,750$8,550 – $13,300$12,100 – $16,900

Who does the work: Janesville trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Janesville the blend is 1.06.

Floor layers (except carpet, wood and hard tiles) (47-2042) carry 60% of the labor weighting. BLS does not publish this trade for the Janesville metro, so we used the Wisconsin statewide median: $25.42 an hour against $27.15 for the US. The middle half of them earn between $22.49 and $34.27 an hour.

Carpenters (47-2031), 40% of the weighting: a median of $36.24 an hour, 24% above the US median of $29.12. The middle half of them earn between $23.92 and $39.98 an hour. About 360 work in the metro. That is 51.5 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.

A quick sensitivity check: moving the lead trade (floor layers (except carpet, wood and hard tiles)) from the median to the 75th percentile wage adds about $540 to the midpoint estimate; the 25th percentile takes off about $180. That is a swing of roughly 3.9% to 11.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Janesville-Beloit has 69,870 jobs in total (BLS, May 2025), ranking 260th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Floor layers (except carpet, wood and hard tiles) (47-2042)60%$22.49$25.42$34.27$27.150.94state
Carpenters (47-2031)40%$23.92$36.24$39.98$29.121.24metro
Blended100%1.06

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,550 to $5,550 for Janesville, WI is attached.

A detailed PDF report of this estimate, $9

The report lays out the laminate flooring numbers for Janesville, WI line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Laminate flooring in Janesville: your questions

+How much does it cost to install laminate flooring in Janesville?

For 500 sq ft, expect $2,050 to $7,050 in the Janesville area. A standard-spec job lands at $3,550 to $5,550. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for laminate floor in Janesville?

About $4.10 to $14 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $14.

+Is laminate floor cheaper in Janesville or Rockford?

Rockford is 25 miles away. The midpoint for 500 sq ft there is $4,400, which is 3% less than Janesville ($4,550). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Janesville?

About 64% at the midpoint, or $2,900 out of $4,550. Materials are 36% and permits 0%. Nationally, labor is 61%.

+What would main floor (500 sq ft) cost in Janesville?

$2,050 to $7,050. Pick a different size in the estimator above to get your own number.

+Does laminate floor need a permit in Janesville?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Janesville area (our national range of $0 to $0 scaled by the local price level).

+Is Janesville expensive for laminate floor compared with the rest of Wisconsin?

Janesville is 6% above the Wisconsin statewide estimate ($4,300 at the midpoint). We cover 12 metros in Wisconsin; see the state page to compare them.

+What do floor layers (except carpet, wood and hard tiles) earn in Janesville?

BLS has no published metro figure here, so we use the statewide median of $25.42 an hour, compared with $27.15 nationally. The 25th to 75th percentile range is $22.49 to $34.27.

+What do basic and premium laminate floor work cost in Janesville?

For 500 sq ft, basic work runs $2,050 to $4,050 and premium work $5,050 to $7,050. Basic means: basic click-lock laminate on a flat subfloor. Premium means: premium or brand-name laminate, subfloor repair.

Laminate flooring near Janesville

Laminate flooring: all pricesLaminate flooring in WisconsinAll projects in JanesvilleWisconsin cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $3-$8 per sq ft laminate labor, matched low-to-low and high-to-high.