Skip to content
CostLocal

Kitchen remodel cost in Janesville, WI

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (120 sq ft)
$18,400 – $31,200
Per sq ft
$149 – $248
before permit
Versus US midpoint
−1%
US $25,000
Rank of 300 metros
#92
1 = most expensive

If you want to remodel a kitchen in Janesville, plan on $18,400 to $31,200 for 120 sq ft, all in. Per sq ft, that is $149 to $248 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Building materials run about 6% below the US average here (BEA goods price index 93.8).

Estimate your kitchen remodel cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full remodel, mid-range finishes, some layout changes

Estimated cost for 120 sq ft in Janesville, WI, standard level

$22,200 to $27,400

About $179 to $219 per sq ft before permits. Labor is about 24% of the bill.

Cost breakdown
PartLowHigh
Materials$16,100$19,600
Labor$5,400$6,600
Permits and fees$750$1,100
Total$22,200$27,400
Save and get a PDF report

Cost breakdown for 120 sq ft in Janesville, WI

Part of the jobLowMidpointHighShare
Materials$13,400$17,800$22,30072%
Labor$4,500$6,000$7,50024%
Permits and fees$470$940$1,4004%
Total$18,400$24,800$31,200100%

Why Janesville prices look the way they do

We price the labor side from BLS wage data for 6 trades: carpenters at 45%, electricians at 15%, plumbers, pipefitters and steamfitters at 15%, tile and stone setters at 10%, drywall and ceiling tile installers at 10%, painters, construction and maintenance at 5%. Weighted together, Janesville wages are 1.21 times the national level. Labor makes up about 24% of the midpoint estimate (20% at national prices).

On the materials line, the BEA goods price index for the Janesville metro is 93.8 (US = 100). The midpoint materials bill for 120 sq ft comes to $17,800, compared with $19,000 at national prices. Permit and inspection fees are scaled by the broader index (93.7) and land at $470 to $1,400.

Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Janesville. The wage table below marks each row.

Cost by quality level and size in Janesville

Three bands are cut from the same cited range and localized for Janesville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$18,400 to $23,500

Update: cabinets, counters, flooring and lighting; same layout

Standard

$22,200 to $27,400

Full remodel, mid-range finishes, some layout changes

Premium

$26,100 to $31,200

Large or custom remodel, high-end finishes

Cost by size and quality level
SizeBasicStandardPremium
small kitchen (100 sq ft)$15,400 – $19,700$18,600 – $23,000$21,900 – $26,300
10x12 kitchen (120 sq ft)$18,400 – $23,500$22,200 – $27,400$26,100 – $31,200
average kitchen (200 sq ft)$30,300 – $38,600$36,500 – $44,900$42,800 – $51,100
large kitchen (300 sq ft)$45,200 – $57,500$54,400 – $66,700$63,600 – $76,000

What nearby projects cost in Janesville

Because every project leans on different trades, Janesville's wage level does not move all prices equally. Against the US midpoint, home addition runs +13% and window replacement level.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen cabinets25 linear ft$4,400 – $15,500+9%
Bathroom remodel45 sq ft$5,000 – $24,800+6%
Window replacement10 windows$4,550 – $14,900level
Home addition300 sq ft$43,100 – $87,100+13%
Shower pan1 pan$1,050 – $2,950+8%
Kitchen backsplash30 sq ft$310 – $1,550+2%

Is Janesville cheap or dear? The local comparison

Same job, same size (120 sq ft), priced for the nearest metros. Kenosha is the priciest of the group at $26,500. Racine is the cheapest at $24,300.

Comparison with nearby areas
AreaRangeMidpointvs. here
Janesville, WIthis page$18,400 – $31,200$24,800
Rockford, IL25 miles$18,600 – $31,600$25,100+1%
Madison, WI40 miles$18,100 – $30,900$24,500−1%
Kenosha, WI60 miles$19,700 – $33,400$26,500+7%
Milwaukee, WI65 miles$18,100 – $30,800$24,400−1%
Racine, WI65 miles$18,000 – $30,600$24,300−2%
Wisconsin (statewide)$18,000 – $30,700$24,300−2%
United States$18,500 – $31,500$25,000+1%

Across 300 US metros, Janesville comes in at #92 from the top. The priciest is Honolulu, HI at $30,000; the cheapest is Brownsville, TX at $22,100 (midpoints, 120 sq ft). Statewide, Janesville is 2% above the Wisconsin figure.

Other Wisconsin metros

Wisconsin metros compared with Janesville
MetroSizeRangeMidpointvs. here
Milwaukee, WI820,780 jobs$18,100 – $30,800$24,400−1%
Madison, WI408,070 jobs$18,100 – $30,900$24,500−1%
Green Bay, WI174,550 jobs$18,000 – $30,600$24,300−2%
Appleton, WI124,230 jobs$18,000 – $30,600$24,300−2%
Oshkosh, WI93,750 jobs$18,600 – $31,700$25,100+1%
Eau Claire, WI86,060 jobs$17,900 – $30,500$24,200−2%

Cities with a workforce like Janesville's

Big cities and small ones price differently, so here is Janesville against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Lexington Park, MD70,650 jobs$18,400 – $31,300$24,800level
Wausau, WI69,530 jobs$17,700 – $30,100$23,900−4%
Bismarck, ND71,270 jobs$17,600 – $29,900$23,700−4%
Yuma, AZ68,880 jobs$17,400 – $29,600$23,500−5%

Specs and site conditions that change a Janesville bid

  • Cabinets

    In a 10x10 kitchen, cabinets alone are $3,000-$11,000 for stock or semi-custom and up to $26,500 for fully custom.

  • Counters

    New countertops are $50-$150 per square foot installed; HomeGuide gives $1,500-$6,000 for an average kitchen.

  • Structure

    Moving or removing walls can need a structural engineer at $1,900-$3,700+.

Janesville labor market for kitchen remodel

Wages are the part of this estimate that changes most from town to town. 6 trades carry the job here, and each is compared with its US median. The weighted result for Janesville is 1.21 times the national level.

For carpenters (47-2031, weighted 45%) the local median is $36.24 an hour, which is 24% above the national $29.12. The middle half of them earn between $23.92 and $39.98 an hour. BLS counts 360 of them working in the area, 51.5 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.

Electricians (47-2111), 15% of the weighting: a median of $39.51 an hour, 30% above the US median of $30.38. The middle half of them earn between $28.67 and $46.61 an hour. About 560 work in the metro. That is 80.1 per 10,000 jobs, compared with 48.7 nationally, which suggests plenty of local crews to bid.

For plumbers, pipefitters and steamfitters (47-2152, weighted 15%) the local median is $38.01 an hour, which is 24% above the national $30.67. The middle half of them earn between $28.72 and $49.75 an hour. BLS counts 140 of them working in the area, 20.0 for every 10,000 jobs (US: 30.0), so the local bench is thinner than average.

Tile and stone setters (47-2044) carry 10% of the labor weighting. BLS does not publish this trade for the Janesville metro, so we used the Wisconsin statewide median: $30.14 an hour against $26.77 for the US. The middle half of them earn between $27.44 and $36.42 an hour.

Drywall and ceiling tile installers (47-2081) carry 10% of the labor weighting. BLS does not publish this trade for the Janesville metro, so we used the Wisconsin statewide median: $28.83 an hour against $28.33 for the US. The middle half of them earn between $23.05 and $33.42 an hour.

For painters, construction and maintenance (47-2141, weighted 5%) the local median is $25.04 an hour, which is 5% above the national $23.75. The middle half of them earn between $18.70 and $30.62 an hour. BLS counts 50 of them working in the area, 7.2 for every 10,000 jobs (US: 14.5), so the local bench is thinner than average.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($39.98 an hour) instead of the median, the labor line grows by about $290. At the 25th percentile ($23.92) it shrinks by about $950. The total moves by 1.2% or 3.8%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 69,870 jobs in the Janesville-Beloit area. That makes it the 260th largest of the 300 metros we cover, with 0.04% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)45%$23.92$36.24$39.98$29.121.24metro
Electricians (47-2111)15%$28.67$39.51$46.61$30.381.30metro
Plumbers, pipefitters and steamfitters (47-2152)15%$28.72$38.01$49.75$30.671.24metro
Tile and stone setters (47-2044)10%$27.44$30.14$36.42$26.771.13state
Drywall and ceiling tile installers (47-2081)10%$23.05$28.83$33.42$28.331.02state
Painters, construction and maintenance (47-2141)5%$18.70$25.04$30.62$23.751.05metro
Blended100%1.21

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $22,200 to $27,400 for Janesville, WI is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Janesville, WI: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen remodel in Janesville: your questions

+How much does it cost to remodel a kitchen in Janesville?

For 120 sq ft, expect $18,400 to $31,200 in the Janesville area. A standard-spec job lands at $22,200 to $27,400. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for kitchen remodel in Janesville?

About $149 to $248 per sq ft for materials and labor, plus $470 to $1,400 for the permit if one is needed. The US range is $150 to $250.

+Is kitchen remodel cheaper in Janesville or Rockford?

Rockford is 25 miles away. The midpoint for 120 sq ft there is $25,100, which is 1% more than Janesville ($24,800). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Janesville?

About 24% at the midpoint, or $6,000 out of $24,800. Materials are 72% and permits 4%. Nationally, labor is 20%.

+What would average kitchen (200 sq ft) cost in Janesville?

$30,300 to $51,100. Pick a different size in the estimator above to get your own number.

+Does kitchen remodel need a permit in Janesville?

Often, but rules are set by your city or county building office, so call before you hire. Budget $470 to $1,400 for fees in the Janesville area (our national range of $500 to $1,500 scaled by the local price level).

+Is Janesville expensive for kitchen remodel compared with the rest of Wisconsin?

Janesville is 2% above the Wisconsin statewide estimate ($24,300 at the midpoint). We cover 12 metros in Wisconsin; see the state page to compare them.

+What do carpenters earn in Janesville?

The BLS median is $36.24 an hour in the Janesville area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.92 to $39.98.

+What do basic and premium kitchen remodel work cost in Janesville?

For 120 sq ft, basic work runs $18,400 to $23,500 and premium work $26,100 to $31,200. Basic means: update: cabinets, counters, flooring and lighting; same layout. Premium means: large or custom remodel, high-end finishes.

Kitchen remodel near Janesville

Kitchen remodel: all pricesKitchen remodel in WisconsinAll projects in JanesvilleWisconsin cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 70% of the low installed price and 85% of the high one, from HomeGuide's statement that professional labor is 15-30% of a kitchen remodeling budget. Cost to Renovate's mid-range kitchen split (45% labor, 50% materials) sits inside that band.