Skip to content
CostLocal

Laminate flooring cost in Binghamton, NY

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (500 sq ft)
$2,100 – $7,250
Per sq ft
$4.20 – $14.50
before permit
Versus US midpoint
+4%
US $4,500
Rank of 300 metros
#51
1 = most expensive

If you want to install laminate flooring in Binghamton, plan on $2,100 to $7,250 for 500 sq ft, all in. Per sq ft, that is $4.20 to $14.50 for materials and labor, with the permit on top. The local midpoint runs 4% higher than the national one. Floor layers (except carpet, wood and hard tiles) earn a median of $29.50 an hour in the Binghamton area, 9% above the US median of $27.15.

Estimate your laminate flooring cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Thicker waterproof laminate, standard trim

Estimated cost for 500 sq ft in Binghamton, NY, standard level

$3,650 to $5,700

About $7.25 to $11.50 per sq ft before permits. Labor is about 63% of the bill.

Cost breakdown
PartLowHigh
Materials$1,250$2,250
Labor$2,400$3,450
Permits and fees$0$0
Total$3,650$5,700
Save and get a PDF report

Cost breakdown for 500 sq ft in Binghamton, NY

Part of the jobLowMidpointHighShare
Materials$500$1,750$3,00037%
Labor$1,600$2,900$4,25063%
Permits and fees$0$0$00%
Total$2,100$4,650$7,250100%

Where the Binghamton price comes from

Labor is 63% of the midpoint bill here, against 61% nationally. The mix of trades behind this job is floor layers (except carpet, wood and hard tiles) (60%), carpenters (40%). We weight each trade's local median wage by that share and compare it with the national median. In Binghamton the blended ratio comes out at 1.06. BLS does not publish this trade for the metro, so we used the New York statewide median.

On the materials line, the BEA goods price index for the Binghamton metro is 99.7 (US = 100). The midpoint materials bill for 500 sq ft comes to $1,750, compared with $1,750 at national prices. Permit and inspection fees are scaled by the broader index (92.9) and land at $0 to $0.

Data note: 60% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Binghamton. The wage table below marks each row.

Specs and site conditions that change a Binghamton bid

  • Trim

    Baseboards run $6-$9 per linear foot and are a common add-on.

  • Heated floors

    Radiant floor heating adds $7-$17 per sq ft and has to go in before the floor does.

  • Brand

    Name-brand laminate such as Pergo runs $5-$17 per sq ft installed.

Cost by quality level and size in Binghamton

Three bands are cut from the same cited range and localized for Binghamton wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$2,100 to $4,150

Basic click-lock laminate on a flat subfloor

Standard

$3,650 to $5,700

Thicker waterproof laminate, standard trim

Premium

$5,200 to $7,250

Premium or brand-name laminate, subfloor repair

Cost by size and quality level
SizeBasicStandardPremium
one room (200 sq ft)$840 – $1,650$1,450 – $2,300$2,050 – $2,900
main floor (500 sq ft)$2,100 – $4,150$3,650 – $5,700$5,200 – $7,250
whole house (1,200 sq ft)$5,000 – $9,950$8,700 – $13,700$12,400 – $17,400

Binghamton labor market for laminate floor

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Binghamton is 1.06 times the national level.

Floor layers (except carpet, wood and hard tiles) (47-2042) carry 60% of the labor weighting. BLS does not publish this trade for the Binghamton metro, so we used the New York statewide median: $29.50 an hour against $27.15 for the US. The middle half of them earn between $25.00 and $35.50 an hour.

For carpenters (47-2031, weighted 40%) the local median is $29.81 an hour, which is in line with the national $29.12. The middle half of them earn between $24.27 and $36.54 an hour. BLS counts 400 of them working in the area, 41.2 for every 10,000 jobs (US: 43.1), so the local bench is about average.

Quotes come from real crews, not medians. If the floor layers (except carpet, wood and hard tiles) on your job are paid at the 75th percentile ($35.50 an hour) instead of the median, the labor line grows by about $360. At the 25th percentile ($25.00) it shrinks by about $270. The total moves by 7.8% or 5.9%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 97,030 jobs in the Binghamton area. That makes it the 207th largest of the 300 metros we cover, with 0.06% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Floor layers (except carpet, wood and hard tiles) (47-2042)60%$25.00$29.50$35.50$27.151.09state
Carpenters (47-2031)40%$24.27$29.81$36.54$29.121.02metro
Blended100%1.06

Related projects, priced for Binghamton

Because every project leans on different trades, Binghamton's wage level does not move all prices equally. Against the US midpoint, bathroom remodel runs +8% and hardwood flooring +2%.

Related projects with local prices
ProjectSizeRangevs. US
Hardwood flooring500 sq ft$5,600 – $12,700+2%
Tile flooring200 sq ft$2,600 – $10,300+4%
Kitchen remodel120 sq ft$18,900 – $32,100+2%
Bathroom remodel45 sq ft$5,050 – $25,200+8%

Is Binghamton cheap or dear? The local comparison

Same job, same size (500 sq ft), priced for the nearest metros. Syracuse is the priciest of the group at $4,650. Allentown is the cheapest at $4,600.

Comparison with nearby areas
AreaRangeMidpointvs. here
Binghamton, NYthis page$2,100 – $7,250$4,650
Scranton, PA60 miles$2,050 – $7,150$4,600−1%
Syracuse, NY60 miles$2,100 – $7,250$4,650level
Kingston, NY90 miles$2,100 – $7,200$4,650level
Utica, NY90 miles$2,050 – $7,150$4,600−1%
Allentown, PA100 miles$2,050 – $7,150$4,600−1%
New York (statewide)$2,250 – $7,750$5,000+7%
United States$2,000 – $7,000$4,500−4%

Across 300 US metros, Binghamton comes in at #51 from the top. The priciest is San Jose, CA at $6,350; the cheapest is Brownsville, TX at $3,550 (midpoints, 500 sq ft). Statewide, Binghamton is 6% below the New York figure.

Other New York metros

New York metros compared with Binghamton
MetroSizeRangeMidpointvs. here
New York, NY9,492,000 jobs$2,250 – $7,900$5,050+9%
Buffalo, NY534,550 jobs$1,900 – $6,700$4,300−8%
Rochester, NY494,280 jobs$2,050 – $7,150$4,600−1%
Albany, NY449,410 jobs$2,000 – $7,050$4,550−3%
Syracuse, NY300,130 jobs$2,100 – $7,250$4,650level
Poughkeepsie, NY268,970 jobs$2,150 – $7,600$4,900+5%

Cities with a workforce like Binghamton's

Big cities and small ones price differently, so here is Binghamton against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Lynchburg, VA97,190 jobs$1,750 – $6,300$4,050−13%
Yakima, WA97,010 jobs$2,050 – $7,250$4,650level
Slidell, LA98,240 jobs$1,600 – $5,900$3,750−20%
Athens, GA95,800 jobs$1,650 – $6,050$3,850−18%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,650 to $5,700 for Binghamton, NY is attached.

Detailed laminate flooring report for Binghamton, NY, $9

The report lays out the laminate flooring numbers for Binghamton, NY line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Laminate flooring in Binghamton: your questions

+How much does it cost to install laminate flooring in Binghamton?

For 500 sq ft, expect $2,100 to $7,250 in the Binghamton area. A standard-spec job lands at $3,650 to $5,700. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for laminate floor in Binghamton?

About $4.20 to $14.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $14.

+Is laminate floor cheaper in Binghamton or Scranton?

Scranton is 60 miles away. The midpoint for 500 sq ft there is $4,600, which is 1% less than Binghamton ($4,650). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Binghamton?

About 63% at the midpoint, or $2,900 out of $4,650. Materials are 37% and permits 0%. Nationally, labor is 61%.

+What would main floor (500 sq ft) cost in Binghamton?

$2,100 to $7,250. Pick a different size in the estimator above to get your own number.

+Does laminate floor need a permit in Binghamton?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Binghamton area (our national range of $0 to $0 scaled by the local price level).

+Is Binghamton expensive for laminate floor compared with the rest of New York?

Binghamton is 6% below the New York statewide estimate ($5,000 at the midpoint). We cover 9 metros in New York; see the state page to compare them.

+What do floor layers (except carpet, wood and hard tiles) earn in Binghamton?

BLS has no published metro figure here, so we use the statewide median of $29.50 an hour, compared with $27.15 nationally. The 25th to 75th percentile range is $25.00 to $35.50.

+What do basic and premium laminate floor work cost in Binghamton?

For 500 sq ft, basic work runs $2,100 to $4,150 and premium work $5,200 to $7,250. Basic means: basic click-lock laminate on a flat subfloor. Premium means: premium or brand-name laminate, subfloor repair.

Laminate flooring near Binghamton

Laminate flooring: all pricesLaminate flooring in New YorkAll projects in BinghamtonNew York cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $3-$8 per sq ft laminate labor, matched low-to-low and high-to-high.