Skip to content
CostLocal

Laminate flooring cost in Albany, NY

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (500 sq ft)
$2,000 – $7,050
Per sq ft
$4.05 – $14
before permit
Versus US midpoint
+1%
US $4,500
Rank of 300 metros
#77
1 = most expensive

If you want to install laminate flooring in Albany, plan on $2,000 to $7,050 for 500 sq ft, all in. Per sq ft, that is $4.05 to $14 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Floor layers (except carpet, wood and hard tiles) earn a median of $27.75 an hour in the Albany area, 2% above the US median of $27.15.

Estimate your laminate flooring cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Thicker waterproof laminate, standard trim

Estimated cost for 500 sq ft in Albany, NY, standard level

$3,550 to $5,550

About $7.05 to $11 per sq ft before permits. Labor is about 62% of the bill.

Cost breakdown
PartLowHigh
Materials$1,250$2,250
Labor$2,300$3,300
Permits and fees$0$0
Total$3,550$5,550
Save and get a PDF report

Cost breakdown for 500 sq ft in Albany, NY

Part of the jobLowMidpointHighShare
Materials$500$1,750$3,00038%
Labor$1,500$2,800$4,05062%
Permits and fees$0$0$00%
Total$2,000$4,550$7,050100%

Where the Albany price comes from

We price the labor side from BLS wage data for 2 trades: floor layers (except carpet, wood and hard tiles) at 60%, carpenters at 40%. Weighted together, Albany wages are 1.01 times the national level. Labor makes up about 62% of the midpoint estimate (61% at national prices).

On the materials line, the BEA goods price index for the Albany metro is 99.7 (US = 100). The midpoint materials bill for 500 sq ft comes to $1,750, compared with $1,750 at national prices. Permit and inspection fees are scaled by the broader index (99.6) and land at $0 to $0.

Specs and site conditions that change a Albany bid

  • Trim

    Baseboards run $6-$9 per linear foot and are a common add-on.

  • Heated floors

    Radiant floor heating adds $7-$17 per sq ft and has to go in before the floor does.

  • Brand

    Name-brand laminate such as Pergo runs $5-$17 per sq ft installed.

Cost by quality level and size in Albany

Three bands are cut from the same cited range and localized for Albany wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$2,000 to $4,050

Basic click-lock laminate on a flat subfloor

Standard

$3,550 to $5,550

Thicker waterproof laminate, standard trim

Premium

$5,050 to $7,050

Premium or brand-name laminate, subfloor repair

Cost by size and quality level
SizeBasicStandardPremium
one room (200 sq ft)$810 – $1,600$1,400 – $2,200$2,000 – $2,800
main floor (500 sq ft)$2,000 – $4,050$3,550 – $5,550$5,050 – $7,050
whole house (1,200 sq ft)$4,850 – $9,650$8,450 – $13,300$12,100 – $16,900

What nearby projects cost in Albany

Because every project leans on different trades, Albany's wage level does not move all prices equally. Against the US midpoint, bathroom remodel runs +4% and hardwood flooring level.

Related projects with local prices
ProjectSizeRangevs. US
Hardwood flooring500 sq ft$5,500 – $12,500level
Tile flooring200 sq ft$2,500 – $10,100+2%
Kitchen remodel120 sq ft$18,700 – $31,800+1%
Bathroom remodel45 sq ft$4,900 – $24,300+4%

Albany labor market for laminate floor

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Albany is 1.01 times the national level.

For floor layers (except carpet, wood and hard tiles) (47-2042, weighted 60%) the local median is $27.75 an hour, which is in line with the national $27.15. The middle half of them earn between $23.31 and $32.09 an hour. BLS counts 60 of them working in the area, 1.3 for every 10,000 jobs (US: 1.5), so the local bench is about average.

For carpenters (47-2031, weighted 40%) the local median is $29.19 an hour, which is in line with the national $29.12. The middle half of them earn between $25.00 and $36.71 an hour. BLS counts 2,000 of them working in the area, 44.5 for every 10,000 jobs (US: 43.1), so the local bench is about average.

Quotes come from real crews, not medians. If the floor layers (except carpet, wood and hard tiles) on your job are paid at the 75th percentile ($32.09 an hour) instead of the median, the labor line grows by about $260. At the 25th percentile ($23.31) it shrinks by about $270. The total moves by 5.8% or 6.0%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 449,410 jobs in the Albany-Schenectady-Troy area. That makes it the 55th largest of the 300 metros we cover, with 0.29% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Floor layers (except carpet, wood and hard tiles) (47-2042)60%$23.31$27.75$32.09$27.151.02metro
Carpenters (47-2031)40%$25.00$29.19$36.71$29.121.00metro
Blended100%1.01

How Albany compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 500 sq ft range from $4,550 to $5,250 across Albany and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Albany, NYthis page$2,000 – $7,050$4,550
Pittsfield, MA45 miles$2,350 – $7,950$5,150+14%
Kingston, NY60 miles$2,100 – $7,200$4,650+3%
Amherst, MA70 miles$2,400 – $8,050$5,250+15%
Utica, NY75 miles$2,050 – $7,150$4,600+2%
Springfield, MA80 miles$2,400 – $8,000$5,200+15%
New York (statewide)$2,250 – $7,750$5,000+10%
United States$2,000 – $7,000$4,500−1%

Across 300 US metros, Albany comes in at #77 from the top. The priciest is San Jose, CA at $6,350; the cheapest is Brownsville, TX at $3,550 (midpoints, 500 sq ft). Statewide, Albany is 9% below the New York figure.

Other New York metros

New York metros compared with Albany
MetroSizeRangeMidpointvs. here
New York, NY9,492,000 jobs$2,250 – $7,900$5,050+12%
Buffalo, NY534,550 jobs$1,900 – $6,700$4,300−5%
Rochester, NY494,280 jobs$2,050 – $7,150$4,600+2%
Syracuse, NY300,130 jobs$2,100 – $7,250$4,650+3%
Poughkeepsie, NY268,970 jobs$2,150 – $7,600$4,900+8%
Utica, NY118,390 jobs$2,050 – $7,150$4,600+2%

Cities with a workforce like Albany's

Big cities and small ones price differently, so here is Albany against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Tulsa, OK458,730 jobs$1,550 – $5,700$3,600−20%
Honolulu, HI446,380 jobs$2,700 – $9,100$5,900+31%
Fresno, CA476,890 jobs$2,000 – $7,050$4,500level
New Orleans, LA445,550 jobs$1,650 – $5,950$3,800−17%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,550 to $5,550 for Albany, NY is attached.

Detailed laminate flooring report for Albany, NY, $9

The report lays out the laminate flooring numbers for Albany, NY line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Laminate flooring in Albany: your questions

+How much does it cost to install laminate flooring in Albany?

For 500 sq ft, expect $2,000 to $7,050 in the Albany area. A standard-spec job lands at $3,550 to $5,550. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for laminate floor in Albany?

About $4.05 to $14 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $14.

+Is laminate floor cheaper in Albany or Pittsfield?

Pittsfield is 45 miles away. The midpoint for 500 sq ft there is $5,150, which is 14% more than Albany ($4,550). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Albany?

About 62% at the midpoint, or $2,800 out of $4,550. Materials are 38% and permits 0%. Nationally, labor is 61%.

+What would main floor (500 sq ft) cost in Albany?

$2,000 to $7,050. Pick a different size in the estimator above to get your own number.

+Does laminate floor need a permit in Albany?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Albany area (our national range of $0 to $0 scaled by the local price level).

+Is Albany expensive for laminate floor compared with the rest of New York?

Albany is 9% below the New York statewide estimate ($5,000 at the midpoint). We cover 9 metros in New York; see the state page to compare them.

+What do floor layers (except carpet, wood and hard tiles) earn in Albany?

The BLS median is $27.75 an hour in the Albany area, compared with $27.15 nationally. The 25th to 75th percentile range is $23.31 to $32.09.

+What do basic and premium laminate floor work cost in Albany?

For 500 sq ft, basic work runs $2,000 to $4,050 and premium work $5,050 to $7,050. Basic means: basic click-lock laminate on a flat subfloor. Premium means: premium or brand-name laminate, subfloor repair.

Laminate flooring near Albany

Laminate flooring: all pricesLaminate flooring in New YorkAll projects in AlbanyNew York cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $3-$8 per sq ft laminate labor, matched low-to-low and high-to-high.