Skip to content
CostLocal

Laminate flooring cost in Dothan, AL

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (500 sq ft)
$1,500 – $5,650
Per sq ft
$3.05 – $11.50
before permit
Versus US midpoint
−20%
US $4,500
Rank of 300 metros
#299
1 = most expensive

A laminate floor in Dothan, AL usually costs $1,500 to $5,650 for 500 sq ft. That works out to about $3.05 to $11.50 per sq ft before permits. Compared with the national midpoint that is $900 less. Floor layers (except carpet, wood and hard tiles) earn a median of $18.62 an hour in the Dothan area, 31% below the US median of $27.15.

Estimate your laminate flooring cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Thicker waterproof laminate, standard trim

Estimated cost for 500 sq ft in Dothan, AL, standard level

$2,750 to $4,450

About $5.55 to $8.85 per sq ft before permits. Labor is about 53% of the bill.

Cost breakdown
PartLowHigh
Materials$1,200$2,150
Labor$1,550$2,250
Permits and fees$0$0
Total$2,750$4,450
Save and get a PDF report

Cost breakdown for 500 sq ft in Dothan, AL

Part of the jobLowMidpointHighShare
Materials$480$1,700$2,90047%
Labor$1,050$1,900$2,80053%
Permits and fees$0$0$00%
Total$1,500$3,600$5,650100%

Where the Dothan price comes from

We price the labor side from BLS wage data for 2 trades: floor layers (except carpet, wood and hard tiles) at 60%, carpenters at 40%. Weighted together, Dothan wages are 0.69 times the national level. Labor makes up about 53% of the midpoint estimate (61% at national prices). BLS does not publish this trade for the metro, so we used the Alabama statewide median.

Materials are scaled with BEA's regional price parity for goods. Dothan is at 96.4 against 100 for the US, so a materials line of $1,750 nationally becomes $1,700 here (midpoint, 500 sq ft). Permits follow the all-items index of 83.8: $0 to $0.

Data note: 60% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Dothan. The wage table below marks each row.

Cost by quality level and size in Dothan

The cited range is split into basic, standard and premium bands, then scaled to Dothan. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one room (200 sq ft) to whole house (1,200 sq ft).

Basic

$1,500 to $3,200

Basic click-lock laminate on a flat subfloor

Standard

$2,750 to $4,450

Thicker waterproof laminate, standard trim

Premium

$4,000 to $5,650

Premium or brand-name laminate, subfloor repair

Cost by size and quality level
SizeBasicStandardPremium
one room (200 sq ft)$610 – $1,250$1,100 – $1,750$1,600 – $2,250
main floor (500 sq ft)$1,500 – $3,200$2,750 – $4,450$4,000 – $5,650
whole house (1,200 sq ft)$3,650 – $7,650$6,650 – $10,600$9,650 – $13,600

Why two Dothan quotes can differ

  • Floating versus glued

    Click-lock or floating laminate is the easiest and cheapest to install (HomeGuide).

  • Trim

    Baseboards run $6-$9 per linear foot and are a common add-on.

  • Heated floors

    Radiant floor heating adds $7-$17 per sq ft and has to go in before the floor does.

What nearby projects cost in Dothan

Jobs that often go together with laminate floor are priced below at their usual sizes, using the same Dothan wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−8%) and hardwood flooring lowest (−15%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Hardwood flooring500 sq ft$4,650 – $10,700−15%
Tile flooring200 sq ft$1,950 – $9,100−11%
Kitchen remodel120 sq ft$17,000 – $28,900−8%
Bathroom remodel45 sq ft$4,050 – $20,100−14%

What local crews earn in Dothan

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Dothan the blend is 0.69.

Floor layers (except carpet, wood and hard tiles) (47-2042) carry 60% of the labor weighting. BLS does not publish this trade for the Dothan metro, so we used the Alabama statewide median: $18.62 an hour against $27.15 for the US. The middle half of them earn between $16.51 and $23.78 an hour.

Carpenters (47-2031), 40% of the weighting: a median of $20.58 an hour, 29% below the US median of $29.12. The middle half of them earn between $17.19 and $23.52 an hour. About 130 work in the metro. That is 21.4 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

A quick sensitivity check: moving the lead trade (floor layers (except carpet, wood and hard tiles)) from the median to the 75th percentile wage adds about $310 to the midpoint estimate; the 25th percentile takes off about $130. That is a swing of roughly 3.6% to 8.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Dothan has 60,720 jobs in total (BLS, May 2025), ranking 284th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Floor layers (except carpet, wood and hard tiles) (47-2042)60%$16.51$18.62$23.78$27.150.69state
Carpenters (47-2031)40%$17.19$20.58$23.52$29.120.71metro
Blended100%0.69

How Dothan compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 500 sq ft range from $3,600 to $4,250 across Dothan and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Dothan, ALthis page$1,500 – $5,650$3,600
Panama City, FL70 miles$1,900 – $6,600$4,250+18%
Crestview, FL70 miles$1,850 – $6,600$4,250+18%
Albany, GA85 miles$1,600 – $5,850$3,750+4%
Auburn, AL85 miles$1,550 – $5,800$3,700+2%
Columbus, GA90 miles$1,650 – $6,050$3,850+7%
Alabama (statewide)$1,600 – $5,800$3,700+3%
United States$2,000 – $7,000$4,500+25%

Out of the 300 metros we cover, Dothan ranks #299 for the cost of this job (#1 is the most expensive). Statewide, Dothan is 3% below the Alabama figure.

Elsewhere in Alabama

Alabama metros compared with Dothan
MetroSizeRangeMidpointvs. here
Birmingham, AL520,290 jobs$1,600 – $5,850$3,750+4%
Huntsville, AL266,650 jobs$1,600 – $5,850$3,700+3%
Mobile, AL172,550 jobs$1,600 – $5,800$3,700+3%
Montgomery, AL165,550 jobs$1,550 – $5,800$3,700+2%
Tuscaloosa, AL108,460 jobs$1,600 – $5,850$3,700+3%
Daphne, AL87,120 jobs$1,550 – $5,800$3,650+2%

Metros of a similar size

Big cities and small ones price differently, so here is Dothan against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Decatur, AL61,240 jobs$1,600 – $5,900$3,750+4%
Sheboygan, WI60,630 jobs$1,950 – $6,700$4,350+20%
Santa Fe, NM61,770 jobs$1,850 – $6,550$4,200+17%
Jonesboro, AR60,620 jobs$1,550 – $5,700$3,650+1%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,750 to $4,450 for Dothan, AL is attached.

Detailed laminate flooring report for Dothan, AL, $9

The report lays out the laminate flooring numbers for Dothan, AL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Laminate flooring in Dothan: your questions

+How much does it cost to install laminate flooring in Dothan?

For 500 sq ft, expect $1,500 to $5,650 in the Dothan area. A standard-spec job lands at $2,750 to $4,450. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for laminate floor in Dothan?

About $3.05 to $11.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $14.

+Is laminate floor cheaper in Dothan or Panama City?

Panama City is 70 miles away. The midpoint for 500 sq ft there is $4,250, which is 18% more than Dothan ($3,600). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Dothan?

About 53% at the midpoint, or $1,900 out of $3,600. Materials are 47% and permits 0%. Nationally, labor is 61%.

+What would main floor (500 sq ft) cost in Dothan?

$1,500 to $5,650. Pick a different size in the estimator above to get your own number.

+Does laminate floor need a permit in Dothan?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Dothan area (our national range of $0 to $0 scaled by the local price level).

+Is Dothan expensive for laminate floor compared with the rest of Alabama?

Dothan is 3% below the Alabama statewide estimate ($3,700 at the midpoint). We cover 9 metros in Alabama; see the state page to compare them.

+What do floor layers (except carpet, wood and hard tiles) earn in Dothan?

BLS has no published metro figure here, so we use the statewide median of $18.62 an hour, compared with $27.15 nationally. The 25th to 75th percentile range is $16.51 to $23.78.

+What do basic and premium laminate floor work cost in Dothan?

For 500 sq ft, basic work runs $1,500 to $3,200 and premium work $4,000 to $5,650. Basic means: basic click-lock laminate on a flat subfloor. Premium means: premium or brand-name laminate, subfloor repair.

Laminate flooring near Dothan

Laminate flooring: all pricesLaminate flooring in AlabamaAll projects in DothanAlabama cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $3-$8 per sq ft laminate labor, matched low-to-low and high-to-high.