Skip to content
CostLocal

Kitchen remodel cost in Dothan, AL

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (120 sq ft)
$17,000 – $28,900
Per sq ft
$138 – $230
before permit
Versus US midpoint
−8%
US $25,000
Rank of 300 metros
#276
1 = most expensive

Dothan homeowners pay roughly $17,000 to $28,900 to remodel a kitchen at 120 sq ft, or $138 to $230 per sq ft (permit not included). Against the US midpoint, Dothan is 8% lower. Carpenters earn a median of $20.58 an hour in the Dothan area, 29% below the US median of $29.12.

Estimate your kitchen remodel cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full remodel, mid-range finishes, some layout changes

Estimated cost for 120 sq ft in Dothan, AL, standard level

$20,500 to $25,300

About $166 to $202 per sq ft before permits. Labor is about 16% of the bill.

Cost breakdown
PartLowHigh
Materials$16,500$20,200
Labor$3,350$4,100
Permits and fees$670$1,000
Total$20,500$25,300
Save and get a PDF report

Cost breakdown for 120 sq ft in Dothan, AL

Part of the jobLowMidpointHighShare
Materials$13,800$18,300$22,90080%
Labor$2,800$3,750$4,70016%
Permits and fees$420$840$1,2504%
Total$17,000$22,900$28,900100%

Why Dothan prices look the way they do

We price the labor side from BLS wage data for 6 trades: carpenters at 45%, electricians at 15%, plumbers, pipefitters and steamfitters at 15%, tile and stone setters at 10%, drywall and ceiling tile installers at 10%, painters, construction and maintenance at 5%. Weighted together, Dothan wages are 0.75 times the national level. Labor makes up about 16% of the midpoint estimate (20% at national prices).

On the materials line, the BEA goods price index for the Dothan metro is 96.4 (US = 100). The midpoint materials bill for 120 sq ft comes to $18,300, compared with $19,000 at national prices. Permit and inspection fees are scaled by the broader index (83.8) and land at $420 to $1,250.

Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Dothan. The wage table below marks each row.

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 6 trades carry the job here, and each is compared with its US median. The weighted result for Dothan is 0.75 times the national level.

For carpenters (47-2031, weighted 45%) the local median is $20.58 an hour, which is 29% below the national $29.12. The middle half of them earn between $17.19 and $23.52 an hour. BLS counts 130 of them working in the area, 21.4 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Electricians (47-2111), 15% of the weighting: a median of $22.90 an hour, 25% below the US median of $30.38. The middle half of them earn between $20.51 and $28.93 an hour. About 280 work in the metro. That is 46.1 per 10,000 jobs, compared with 48.7 nationally, so the supply of crews looks typical.

For plumbers, pipefitters and steamfitters (47-2152, weighted 15%) the local median is $23.59 an hour, which is 23% below the national $30.67. The middle half of them earn between $20.02 and $28.37 an hour. BLS counts 130 of them working in the area, 21.4 for every 10,000 jobs (US: 30.0), so the local bench is thinner than average.

Tile and stone setters (47-2044) carry 10% of the labor weighting. BLS does not publish this trade for the Dothan metro, so we used the Alabama statewide median: $21.54 an hour against $26.77 for the US. The middle half of them earn between $17.91 and $22.86 an hour.

Drywall and ceiling tile installers (47-2081) carry 10% of the labor weighting. BLS does not publish this trade for the Dothan metro, so we used the Alabama statewide median: $23.08 an hour against $28.33 for the US. The middle half of them earn between $20.04 and $24.75 an hour.

For painters, construction and maintenance (47-2141, weighted 5%) the local median is $21.11 an hour, which is 11% below the national $23.75. The middle half of them earn between $17.38 and $24.34 an hour. BLS counts 70 of them working in the area, 11.5 for every 10,000 jobs (US: 14.5), so the local bench is thinner than average.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($23.52 an hour) instead of the median, the labor line grows by about $230. At the 25th percentile ($17.19) it shrinks by about $260. The total moves by 1.0% or 1.1%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 60,720 jobs in the Dothan area. That makes it the 284th largest of the 300 metros we cover, with 0.04% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)45%$17.19$20.58$23.52$29.120.71metro
Electricians (47-2111)15%$20.51$22.90$28.93$30.380.75metro
Plumbers, pipefitters and steamfitters (47-2152)15%$20.02$23.59$28.37$30.670.77metro
Tile and stone setters (47-2044)10%$17.91$21.54$22.86$26.770.80state
Drywall and ceiling tile installers (47-2081)10%$20.04$23.08$24.75$28.330.81state
Painters, construction and maintenance (47-2141)5%$17.38$21.11$24.34$23.750.89metro
Blended100%0.75

Pick a size, pick a tier: kitchen remodel pricing in Dothan

Three bands are cut from the same cited range and localized for Dothan wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$17,000 to $21,700

Update: cabinets, counters, flooring and lighting; same layout

Standard

$20,500 to $25,300

Full remodel, mid-range finishes, some layout changes

Premium

$24,100 to $28,900

Large or custom remodel, high-end finishes

Cost by size and quality level
SizeBasicStandardPremium
small kitchen (100 sq ft)$14,200 – $18,200$17,200 – $21,200$20,200 – $24,300
10x12 kitchen (120 sq ft)$17,000 – $21,700$20,500 – $25,300$24,100 – $28,900
average kitchen (200 sq ft)$28,000 – $35,700$33,800 – $41,500$39,600 – $47,300
large kitchen (300 sq ft)$41,800 – $53,200$50,400 – $61,700$58,900 – $70,300

Why two Dothan quotes can differ

  • Counters

    New countertops are $50-$150 per square foot installed; HomeGuide gives $1,500-$6,000 for an average kitchen.

  • Structure

    Moving or removing walls can need a structural engineer at $1,900-$3,700+.

  • Permit

    Kitchen remodel permits are $500-$1,500 and are usually based on project value.

Planning more than one job in Dothan?

Because every project leans on different trades, Dothan's wage level does not move all prices equally. Against the US midpoint, window replacement runs −9% and home addition −18%.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen cabinets25 linear ft$3,750 – $11,500−17%
Bathroom remodel45 sq ft$4,050 – $20,100−14%
Window replacement10 windows$4,000 – $13,700−9%
Home addition300 sq ft$31,000 – $62,900−18%
Shower pan1 pan$760 – $2,400−15%
Kitchen backsplash30 sq ft$260 – $1,350−11%

Is Dothan cheap or dear? The local comparison

Same job, same size (120 sq ft), priced for the nearest metros. Crestview is the priciest of the group at $23,400.

Comparison with nearby areas
AreaRangeMidpointvs. here
Dothan, ALthis page$17,000 – $28,900$22,900
Panama City, FL70 miles$17,300 – $29,500$23,400+2%
Crestview, FL70 miles$17,300 – $29,600$23,400+2%
Albany, GA85 miles$17,100 – $29,000$23,100+1%
Auburn, AL85 miles$17,200 – $29,200$23,200+1%
Columbus, GA90 miles$17,100 – $29,200$23,200+1%
Alabama (statewide)$17,300 – $29,400$23,400+2%
United States$18,500 – $31,500$25,000+9%

Across 300 US metros, Dothan comes in at #276 from the top. The priciest is Honolulu, HI at $30,000; the cheapest is Brownsville, TX at $22,100 (midpoints, 120 sq ft). Statewide, Dothan is 2% below the Alabama figure.

Other Alabama metros

Alabama metros compared with Dothan
MetroSizeRangeMidpointvs. here
Birmingham, AL520,290 jobs$17,400 – $29,600$23,500+3%
Huntsville, AL266,650 jobs$17,400 – $29,600$23,500+2%
Mobile, AL172,550 jobs$17,400 – $29,600$23,500+2%
Montgomery, AL165,550 jobs$17,200 – $29,300$23,300+1%
Tuscaloosa, AL108,460 jobs$17,400 – $29,500$23,400+2%
Daphne, AL87,120 jobs$17,200 – $29,400$23,300+2%

Cities with a workforce like Dothan's

Big cities and small ones price differently, so here is Dothan against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Decatur, AL61,240 jobs$17,500 – $29,700$23,600+3%
Sheboygan, WI60,630 jobs$18,100 – $30,800$24,400+7%
Santa Fe, NM61,770 jobs$17,600 – $30,000$23,800+4%
Jonesboro, AR60,620 jobs$16,500 – $28,100$22,300−3%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $20,500 to $25,300 for Dothan, AL is attached.

Detailed kitchen remodel report for Dothan, AL, $9

Multi-page report for Dothan, AL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen remodel in Dothan: your questions

+How much does it cost to remodel a kitchen in Dothan?

For 120 sq ft, expect $17,000 to $28,900 in the Dothan area. A standard-spec job lands at $20,500 to $25,300. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for kitchen remodel in Dothan?

About $138 to $230 per sq ft for materials and labor, plus $420 to $1,250 for the permit if one is needed. The US range is $150 to $250.

+Is kitchen remodel cheaper in Dothan or Panama City?

Panama City is 70 miles away. The midpoint for 120 sq ft there is $23,400, which is 2% more than Dothan ($22,900). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Dothan?

About 16% at the midpoint, or $3,750 out of $22,900. Materials are 80% and permits 4%. Nationally, labor is 20%.

+What would average kitchen (200 sq ft) cost in Dothan?

$28,000 to $47,300. Pick a different size in the estimator above to get your own number.

+Does kitchen remodel need a permit in Dothan?

Often, but rules are set by your city or county building office, so call before you hire. Budget $420 to $1,250 for fees in the Dothan area (our national range of $500 to $1,500 scaled by the local price level).

+Is Dothan expensive for kitchen remodel compared with the rest of Alabama?

Dothan is 2% below the Alabama statewide estimate ($23,400 at the midpoint). We cover 9 metros in Alabama; see the state page to compare them.

+What do carpenters earn in Dothan?

The BLS median is $20.58 an hour in the Dothan area, compared with $29.12 nationally. The 25th to 75th percentile range is $17.19 to $23.52.

+What do basic and premium kitchen remodel work cost in Dothan?

For 120 sq ft, basic work runs $17,000 to $21,700 and premium work $24,100 to $28,900. Basic means: update: cabinets, counters, flooring and lighting; same layout. Premium means: large or custom remodel, high-end finishes.

Kitchen remodel near Dothan

Kitchen remodel: all pricesKitchen remodel in AlabamaAll projects in DothanAlabama cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 70% of the low installed price and 85% of the high one, from HomeGuide's statement that professional labor is 15-30% of a kitchen remodeling budget. Cost to Renovate's mid-range kitchen split (45% labor, 50% materials) sits inside that band.