Skip to content
CostLocal

Kitchen remodel cost in Dayton, OH

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (120 sq ft)
$17,400 – $29,600
Per sq ft
$141 – $235
before permit
Versus US midpoint
−6%
US $25,000
Rank of 300 metros
#195
1 = most expensive

Local price for a kitchen remodel in the Dayton area: $17,400 to $29,600 for 120 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.6).

Estimate your kitchen remodel cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full remodel, mid-range finishes, some layout changes

Estimated cost for 120 sq ft in Dayton, OH, standard level

$21,100 to $26,000

About $170 to $207 per sq ft before permits. Labor is about 20% of the bill.

Cost breakdown
PartLowHigh
Materials$16,000$19,600
Labor$4,300$5,300
Permits and fees$740$1,100
Total$21,100$26,000
Save and get a PDF report

Cost breakdown for 120 sq ft in Dayton, OH

Part of the jobLowMidpointHighShare
Materials$13,400$17,800$22,30076%
Labor$3,600$4,800$6,00020%
Permits and fees$460$930$1,4004%
Total$17,400$23,500$29,600100%

What is behind the Dayton number

We price the labor side from BLS wage data for 6 trades: carpenters at 45%, electricians at 15%, plumbers, pipefitters and steamfitters at 15%, tile and stone setters at 10%, drywall and ceiling tile installers at 10%, painters, construction and maintenance at 5%. Weighted together, Dayton wages are 0.96 times the national level. Labor makes up about 20% of the midpoint estimate (20% at national prices).

Materials are scaled with BEA's regional price parity for goods. Dayton is at 93.6 against 100 for the US, so a materials line of $19,000 nationally becomes $17,800 here (midpoint, 120 sq ft). Permits follow the all-items index of 92.7: $460 to $1,400.

Who does the work: Dayton trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 6 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Dayton the blend is 0.96.

Carpenters (47-2031), 45% of the weighting: a median of $28.04 an hour, 4% below the US median of $29.12. The middle half of them earn between $23.03 and $31.60 an hour. About 950 work in the metro. That is 25.5 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

For electricians (47-2111, weighted 15%) the local median is $29.75 an hour, which is in line with the national $30.38. The middle half of them earn between $23.38 and $37.96 an hour. BLS counts 1,920 of them working in the area, 51.5 for every 10,000 jobs (US: 48.7), so the local bench is about average.

Plumbers, pipefitters and steamfitters (47-2152), 15% of the weighting: a median of $30.26 an hour, in line with the US median of $30.67. The middle half of them earn between $24.34 and $39.16 an hour. About 1,130 work in the metro. That is 30.3 per 10,000 jobs, compared with 30.0 nationally, so the supply of crews looks typical.

Tile and stone setters (47-2044), 10% of the weighting: a median of $22.21 an hour, 17% below the US median of $26.77. The middle half of them earn between $21.31 and $28.25 an hour. About 50 work in the metro. That is 1.3 per 10,000 jobs, compared with 2.3 nationally, so expect fewer local crews to bid.

For drywall and ceiling tile installers (47-2081, weighted 10%) the local median is $29.53 an hour, which is 4% above the national $28.33. The middle half of them earn between $23.18 and $34.00 an hour. BLS counts 200 of them working in the area, 5.4 for every 10,000 jobs (US: 5.3), so the local bench is about average.

Painters, construction and maintenance (47-2141), 5% of the weighting: a median of $22.75 an hour, 4% below the US median of $23.75. The middle half of them earn between $19.00 and $28.00 an hour. About 300 work in the metro. That is 8.1 per 10,000 jobs, compared with 14.5 nationally, so expect fewer local crews to bid.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $270 to the midpoint estimate; the 25th percentile takes off about $390. That is a swing of roughly 1.6% to 1.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Dayton-Kettering-Beavercreek has 372,660 jobs in total (BLS, May 2025), ranking 70th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)45%$23.03$28.04$31.60$29.120.96metro
Electricians (47-2111)15%$23.38$29.75$37.96$30.380.98metro
Plumbers, pipefitters and steamfitters (47-2152)15%$24.34$30.26$39.16$30.670.99metro
Tile and stone setters (47-2044)10%$21.31$22.21$28.25$26.770.83metro
Drywall and ceiling tile installers (47-2081)10%$23.18$29.53$34.00$28.331.04metro
Painters, construction and maintenance (47-2141)5%$19.00$22.75$28.00$23.750.96metro
Blended100%0.96

Pick a size, pick a tier: kitchen remodel pricing in Dayton

The cited range is split into basic, standard and premium bands, then scaled to Dayton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small kitchen (100 sq ft) to large kitchen (300 sq ft).

Basic

$17,400 to $22,300

Update: cabinets, counters, flooring and lighting; same layout

Standard

$21,100 to $26,000

Full remodel, mid-range finishes, some layout changes

Premium

$24,800 to $29,600

Large or custom remodel, high-end finishes

Cost by size and quality level
SizeBasicStandardPremium
small kitchen (100 sq ft)$14,600 – $18,700$17,700 – $21,800$20,800 – $24,900
10x12 kitchen (120 sq ft)$17,400 – $22,300$21,100 – $26,000$24,800 – $29,600
average kitchen (200 sq ft)$28,700 – $36,600$34,600 – $42,600$40,600 – $48,500
large kitchen (300 sq ft)$42,800 – $54,500$51,600 – $63,300$60,400 – $72,000

Related projects, priced for Dayton

Jobs that often go together with kitchen remodel are priced below at their usual sizes, using the same Dayton wage and price inputs. Compared with national midpoints, home addition comes out highest (−3%) and kitchen backsplash lowest (−10%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen cabinets25 linear ft$4,000 – $13,300−5%
Bathroom remodel45 sq ft$4,400 – $21,900−6%
Window replacement10 windows$4,350 – $14,400−4%
Home addition300 sq ft$36,800 – $74,600−3%
Shower pan1 pan$850 – $2,600−8%
Kitchen backsplash30 sq ft$270 – $1,350−10%

How Dayton compares

Same job, same size (120 sq ft), priced for the nearest metros. Indianapolis is the priciest of the group at $24,200.

Comparison with nearby areas
AreaRangeMidpointvs. here
Dayton, OHthis page$17,400 – $29,600$23,500
Cincinnati, OH55 miles$17,500 – $29,800$23,700+1%
Columbus, OH70 miles$17,700 – $30,200$24,000+2%
Fort Wayne, IN100 miles$17,700 – $30,200$23,900+2%
Indianapolis, IN105 miles$17,900 – $30,500$24,200+3%
Lexington, KY120 miles$17,500 – $29,800$23,600level
Ohio (statewide)$17,500 – $29,800$23,700+1%
United States$18,500 – $31,500$25,000+6%

Out of the 300 metros we cover, Dayton ranks #195 for the cost of this job (#1 is the most expensive). Statewide, Dayton is 1% below the Ohio figure.

Elsewhere in Ohio

Ohio metros compared with Dayton
MetroSizeRangeMidpointvs. here
Columbus, OH1,105,580 jobs$17,700 – $30,200$24,000+2%
Cincinnati, OH1,101,030 jobs$17,500 – $29,800$23,700+1%
Cleveland, OH1,031,130 jobs$17,600 – $30,000$23,800+1%
Akron, OH319,560 jobs$17,700 – $30,100$23,900+2%
Toledo, OH291,530 jobs$17,600 – $30,000$23,800+1%
Canton, OH163,080 jobs$17,300 – $29,500$23,400−1%

Metros of a similar size

Big cities and small ones price differently, so here is Dayton against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Allentown, PA377,180 jobs$18,600 – $31,600$25,100+7%
Greensboro, NC365,410 jobs$17,500 – $29,700$23,600level
Tucson, AZ389,630 jobs$17,400 – $29,700$23,600level
Little Rock, AR358,210 jobs$16,700 – $28,400$22,500−4%

Specs and site conditions that change a Dayton bid

  • Structure

    Moving or removing walls can need a structural engineer at $1,900-$3,700+.

  • Permit

    Kitchen remodel permits are $500-$1,500 and are usually based on project value.

  • Scope

    A full kitchen update is $15,000-$50,000, a large remodel $50,000-$70,000+, and a partial refresh $60-$150 per square foot (HomeGuide).

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $21,100 to $26,000 for Dayton, OH is attached.

Take this estimate with you: PDF report, $9

Multi-page report for Dayton, OH: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen remodel in Dayton: your questions

+How much does it cost to remodel a kitchen in Dayton?

For 120 sq ft, expect $17,400 to $29,600 in the Dayton area. A standard-spec job lands at $21,100 to $26,000. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for kitchen remodel in Dayton?

About $141 to $235 per sq ft for materials and labor, plus $460 to $1,400 for the permit if one is needed. The US range is $150 to $250.

+Is kitchen remodel cheaper in Dayton or Cincinnati?

Cincinnati is 55 miles away. The midpoint for 120 sq ft there is $23,700, which is 1% more than Dayton ($23,500). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Dayton?

About 20% at the midpoint, or $4,800 out of $23,500. Materials are 76% and permits 4%. Nationally, labor is 20%.

+What would average kitchen (200 sq ft) cost in Dayton?

$28,700 to $48,500. Pick a different size in the estimator above to get your own number.

+Does kitchen remodel need a permit in Dayton?

Often, but rules are set by your city or county building office, so call before you hire. Budget $460 to $1,400 for fees in the Dayton area (our national range of $500 to $1,500 scaled by the local price level).

+Is Dayton expensive for kitchen remodel compared with the rest of Ohio?

Dayton is 1% below the Ohio statewide estimate ($23,700 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.

+What do carpenters earn in Dayton?

The BLS median is $28.04 an hour in the Dayton area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.03 to $31.60.

+What do basic and premium kitchen remodel work cost in Dayton?

For 120 sq ft, basic work runs $17,400 to $22,300 and premium work $24,800 to $29,600. Basic means: update: cabinets, counters, flooring and lighting; same layout. Premium means: large or custom remodel, high-end finishes.

Kitchen remodel near Dayton

Kitchen remodel: all pricesKitchen remodel in OhioAll projects in DaytonOhio cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 70% of the low installed price and 85% of the high one, from HomeGuide's statement that professional labor is 15-30% of a kitchen remodeling budget. Cost to Renovate's mid-range kitchen split (45% labor, 50% materials) sits inside that band.