Skip to content
CostLocal

Bathroom remodel cost in Dayton, OH

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (45 sq ft)
$4,400 – $21,900
Per sq ft
$94 – $470
before permit
Versus US midpoint
−6%
US $14,000
Rank of 300 metros
#166
1 = most expensive

Local price for a bathroom remodel in the Dayton area: $4,400 to $21,900 for 45 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Plumbers, pipefitters and steamfitters earn a median of $30.26 an hour in the Dayton area, 1% below the US median of $30.67.

Estimate your bathroom remodel cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full remodel with new tub or shower and tile

Estimated cost for 45 sq ft in Dayton, OH, standard level

$9,650 to $16,700

About $207 to $358 per sq ft before permits. Labor is about 53% of the bill.

Cost breakdown
PartLowHigh
Materials$4,150$7,200
Labor$5,150$8,900
Permits and fees$350$570
Total$9,650$16,700
Save and get a PDF report

Cost breakdown for 45 sq ft in Dayton, OH

Part of the jobLowMidpointHighShare
Materials$1,900$5,700$9,50043%
Labor$2,350$7,000$11,70053%
Permits and fees$190$460$7404%
Total$4,400$13,200$21,900100%

What is behind the Dayton number

Labor is 53% of the midpoint bill here, against 53% nationally. The mix of trades behind this job is plumbers, pipefitters and steamfitters (25%), tile and stone setters (25%), carpenters (20%), electricians (10%), drywall and ceiling tile installers (10%), painters, construction and maintenance (10%). We weight each trade's local median wage by that share and compare it with the national median. In Dayton the blended ratio comes out at 0.94.

Materials are scaled with BEA's regional price parity for goods. Dayton is at 93.6 against 100 for the US, so a materials line of $6,100 nationally becomes $5,700 here (midpoint, 45 sq ft). Permits follow the all-items index of 92.7: $190 to $740.

Who does the work: Dayton trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 6 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Dayton the blend is 0.94.

Plumbers, pipefitters and steamfitters (47-2152), 25% of the weighting: a median of $30.26 an hour, in line with the US median of $30.67. The middle half of them earn between $24.34 and $39.16 an hour. About 1,130 work in the metro. That is 30.3 per 10,000 jobs, compared with 30.0 nationally, so the supply of crews looks typical.

Tile and stone setters (47-2044), 25% of the weighting: a median of $22.21 an hour, 17% below the US median of $26.77. The middle half of them earn between $21.31 and $28.25 an hour. About 50 work in the metro. That is 1.3 per 10,000 jobs, compared with 2.3 nationally, so expect fewer local crews to bid.

Carpenters (47-2031), 20% of the weighting: a median of $28.04 an hour, 4% below the US median of $29.12. The middle half of them earn between $23.03 and $31.60 an hour. About 950 work in the metro. That is 25.5 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

For electricians (47-2111, weighted 10%) the local median is $29.75 an hour, which is in line with the national $30.38. The middle half of them earn between $23.38 and $37.96 an hour. BLS counts 1,920 of them working in the area, 51.5 for every 10,000 jobs (US: 48.7), so the local bench is about average.

For drywall and ceiling tile installers (47-2081, weighted 10%) the local median is $29.53 an hour, which is 4% above the national $28.33. The middle half of them earn between $23.18 and $34.00 an hour. BLS counts 200 of them working in the area, 5.4 for every 10,000 jobs (US: 5.3), so the local bench is about average.

Painters, construction and maintenance (47-2141), 10% of the weighting: a median of $22.75 an hour, 4% below the US median of $23.75. The middle half of them earn between $19.00 and $28.00 an hour. About 300 work in the metro. That is 8.1 per 10,000 jobs, compared with 14.5 nationally, so expect fewer local crews to bid.

A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $540 to the midpoint estimate; the 25th percentile takes off about $360. That is a swing of roughly 2.7% to 4.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Dayton-Kettering-Beavercreek has 372,660 jobs in total (BLS, May 2025), ranking 70th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Plumbers, pipefitters and steamfitters (47-2152)25%$24.34$30.26$39.16$30.670.99metro
Tile and stone setters (47-2044)25%$21.31$22.21$28.25$26.770.83metro
Carpenters (47-2031)20%$23.03$28.04$31.60$29.120.96metro
Electricians (47-2111)10%$23.38$29.75$37.96$30.380.98metro
Drywall and ceiling tile installers (47-2081)10%$23.18$29.53$34.00$28.331.04metro
Painters, construction and maintenance (47-2141)10%$19.00$22.75$28.00$23.750.96metro
Blended100%0.94

Related projects, priced for Dayton

Jobs that often go together with bathroom remodel are priced below at their usual sizes, using the same Dayton wage and price inputs. Compared with national midpoints, window replacement comes out highest (−4%) and kitchen backsplash lowest (−10%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Shower pan1 pan$850 – $2,600−8%
Kitchen remodel120 sq ft$17,400 – $29,600−6%
Kitchen cabinets25 linear ft$4,000 – $13,300−5%
Window replacement10 windows$4,350 – $14,400−4%
Kitchen backsplash30 sq ft$270 – $1,350−10%

Bathroom remodel: what moves the price in Dayton

  • Permit

    A bathroom remodel permit is $200-$800, more if you move walls (HomeGuide).

  • Size

    HomeGuide's average-size bathroom comes to $3,500-$25,000+; per square foot it's $100-$500.

  • Tile

    New tile costs $10-$50 per square foot installed, and regrouting runs $7-$28 per square foot.

Pick a size, pick a tier: bathroom remodel pricing in Dayton

The cited range is split into basic, standard and premium bands, then scaled to Dayton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from half bath (20 sq ft) to primary bath (100 sq ft).

Basic

$4,400 to $11,400

Cosmetic refresh: vanity, fixtures, paint, flooring

Standard

$9,650 to $16,700

Full remodel with new tub or shower and tile

Premium

$14,900 to $21,900

Primary bath, custom tile, layout change

Cost by size and quality level
SizeBasicStandardPremium
half bath (20 sq ft)$2,050 – $5,300$4,500 – $7,750$6,900 – $10,200
small full bath (40 sq ft)$3,950 – $10,200$8,650 – $14,900$13,300 – $19,600
average bath (60 sq ft)$5,850 – $15,100$12,800 – $22,000$19,700 – $29,000
primary bath (100 sq ft)$9,600 – $24,900$21,100 – $36,300$32,500 – $47,800

How Dayton compares

Same job, same size (45 sq ft), priced for the nearest metros. Indianapolis is the priciest of the group at $14,000. Lexington is the cheapest at $13,000.

Comparison with nearby areas
AreaRangeMidpointvs. here
Dayton, OHthis page$4,400 – $21,900$13,200
Cincinnati, OH55 miles$4,450 – $22,100$13,300+1%
Columbus, OH70 miles$4,550 – $22,600$13,600+3%
Fort Wayne, IN100 miles$4,600 – $22,900$13,700+4%
Indianapolis, IN105 miles$4,700 – $23,400$14,000+7%
Lexington, KY120 miles$4,350 – $21,600$13,000−1%
Ohio (statewide)$4,450 – $22,100$13,300+1%
United States$4,700 – $23,300$14,000+6%

Out of the 300 metros we cover, Dayton ranks #166 for the cost of this job (#1 is the most expensive). Statewide, Dayton is 1% below the Ohio figure.

Elsewhere in Ohio

Ohio metros compared with Dayton
MetroSizeRangeMidpointvs. here
Columbus, OH1,105,580 jobs$4,550 – $22,600$13,600+3%
Cincinnati, OH1,101,030 jobs$4,450 – $22,100$13,300+1%
Cleveland, OH1,031,130 jobs$4,550 – $22,500$13,500+3%
Akron, OH319,560 jobs$4,600 – $22,700$13,700+4%
Toledo, OH291,530 jobs$4,550 – $22,500$13,500+3%
Canton, OH163,080 jobs$4,350 – $21,700$13,000−1%

Metros of a similar size

Big cities and small ones price differently, so here is Dayton against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Allentown, PA377,180 jobs$4,700 – $23,300$14,000+6%
Greensboro, NC365,410 jobs$4,300 – $21,300$12,800−3%
Tucson, AZ389,630 jobs$4,350 – $21,500$12,900−2%
Little Rock, AR358,210 jobs$3,950 – $19,600$11,800−11%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $9,650 to $16,700 for Dayton, OH is attached.

Detailed bathroom remodel report for Dayton, OH, $9

Multi-page report for Dayton, OH: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Bathroom remodel in Dayton: your questions

+How much does it cost to remodel a bathroom in Dayton?

For 45 sq ft, expect $4,400 to $21,900 in the Dayton area. A standard-spec job lands at $9,650 to $16,700. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for bathroom remodel in Dayton?

About $94 to $470 per sq ft for materials and labor, plus $190 to $740 for the permit if one is needed. The US range is $100 to $500.

+Is bathroom remodel cheaper in Dayton or Cincinnati?

Cincinnati is 55 miles away. The midpoint for 45 sq ft there is $13,300, which is 1% more than Dayton ($13,200). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Dayton?

About 53% at the midpoint, or $7,000 out of $13,200. Materials are 43% and permits 4%. Nationally, labor is 53%.

+What would average bath (60 sq ft) cost in Dayton?

$5,850 to $29,000. Pick a different size in the estimator above to get your own number.

+Does bathroom remodel need a permit in Dayton?

Often, but rules are set by your city or county building office, so call before you hire. Budget $190 to $740 for fees in the Dayton area (our national range of $200 to $800 scaled by the local price level).

+Is Dayton expensive for bathroom remodel compared with the rest of Ohio?

Dayton is 1% below the Ohio statewide estimate ($13,300 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.

+What do plumbers, pipefitters and steamfitters earn in Dayton?

The BLS median is $30.26 an hour in the Dayton area, compared with $30.67 nationally. The 25th to 75th percentile range is $24.34 to $39.16.

+What do basic and premium bathroom remodel work cost in Dayton?

For 45 sq ft, basic work runs $4,400 to $11,400 and premium work $14,900 to $21,900. Basic means: cosmetic refresh: vanity, fixtures, paint, flooring. Premium means: primary bath, custom tile, layout change.

Bathroom remodel near Dayton

Bathroom remodel: all pricesBathroom remodel in OhioAll projects in DaytonOhio cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 45% of the installed price, from Cost to Renovate's mid-range split for bathroom projects (50% labor, 45% materials, 5% permits and design). Their sample is their own guides, not a survey of contractors, so treat the split as approximate.