Skip to content
CostLocal

Kitchen cabinets cost in Las Vegas, NV

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (25 linear ft)
$4,200 – $14,000
Per linear ft
$148 – $501
before permit
Versus US midpoint
Level
US $9,150
Rank of 300 metros
#100
1 = most expensive

Local price for new kitchen cabinets in the Las Vegas area: $4,200 to $14,000 for 25 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 4% below the US average here (BEA goods price index 96.3).

Estimate your kitchen cabinets cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Semi-custom with upgraded finishes

Estimated cost for 25 linear ft in Las Vegas, NV, standard level

$7,150 to $11,100

About $254 to $395 per linear ft before permits. Labor is about 49% of the bill.

Cost breakdown
PartLowHigh
Materials$3,150$4,100
Labor$3,200$5,800
Permits and fees$800$1,200
Total$7,150$11,100
Save and get a PDF report

Cost breakdown for 25 linear ft in Las Vegas, NV

Part of the jobLowMidpointHighShare
Materials$2,400$3,600$4,80040%
Labor$1,300$4,500$7,70049%
Permits and fees$500$1,000$1,50011%
Total$4,200$9,100$14,000100%

Where the Las Vegas price comes from

Labor is 49% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is carpenters (80%), electricians (10%), plumbers, pipefitters and steamfitters (10%). We weight each trade's local median wage by that share and compare it with the national median. In Las Vegas the blended ratio comes out at 1.03.

Materials are scaled with BEA's regional price parity for goods. Las Vegas is at 96.3 against 100 for the US, so a materials line of $3,750 nationally becomes $3,600 here (midpoint, 25 linear ft). Permits follow the all-items index of 100.2: $500 to $1,500.

Is Las Vegas cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 25 linear ft range from $8,050 to $9,900 across Las Vegas and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Las Vegas, NVthis page$4,200 – $14,000$9,100
Lake Havasu City, AZ80 miles$3,850 – $12,200$8,050−12%
St. George, UT110 miles$3,900 – $12,300$8,100−11%
Riverside, CA130 miles$4,500 – $15,300$9,900+9%
Prescott Valley, AZ175 miles$4,050 – $13,300$8,700−5%
Flagstaff, AZ185 miles$4,050 – $13,300$8,650−5%
Nevada (statewide)$4,200 – $14,100$9,150level
United States$4,250 – $14,000$9,150level

Out of the 300 metros we cover, Las Vegas ranks #100 for the cost of this job (#1 is the most expensive). Statewide, Las Vegas is 0% below the Nevada figure.

Elsewhere in Nevada

Nevada metros compared with Las Vegas
MetroSizeRangeMidpointvs. here
Reno, NV275,680 jobs$4,250 – $14,300$9,250+2%

Metros of a similar size

Big cities and small ones price differently, so here is Las Vegas against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Portland, OR1,208,410 jobs$4,800 – $16,600$10,700+17%
San Jose, CA1,134,970 jobs$4,900 – $17,200$11,000+21%
Austin, TX1,293,690 jobs$3,900 – $12,600$8,250−10%
San Antonio, TX1,126,880 jobs$3,850 – $12,300$8,100−11%

Pick a size, pick a tier: kitchen cabinets pricing in Las Vegas

The cited range is split into basic, standard and premium bands, then scaled to Las Vegas. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small galley (15 linear ft) to large kitchen (40 linear ft).

Basic

$4,200 to $8,150

Stock cabinets, same layout

Standard

$7,150 to $11,100

Semi-custom with upgraded finishes

Premium

$10,100 to $14,000

Custom cabinetry, new layout

Cost by size and quality level
SizeBasicStandardPremium
small galley (15 linear ft)$2,700 – $5,250$4,600 – $7,150$6,500 – $9,000
10x10 kitchen (20 linear ft)$3,450 – $6,700$5,900 – $9,100$8,300 – $11,500
average kitchen (25 linear ft)$4,200 – $8,150$7,150 – $11,100$10,100 – $14,000
large kitchen (40 linear ft)$6,400 – $12,500$11,000 – $17,000$15,500 – $21,600

Kitchen cabinets: what moves the price in Las Vegas

  • Permit

    Kitchen remodeling permits are $500-$1,500 where one is needed, usually when you change layout, plumbing or wiring.

  • Stock, semi-custom or custom

    Stock cabinets run $100-$400 per linear foot installed, semi-custom $150-$700, and custom $500-$1,200 (HomeGuide).

  • Layout changes

    Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.

What nearby projects cost in Las Vegas

Jobs that often go together with kitchen cabinets are priced below at their usual sizes, using the same Las Vegas wage and price inputs. Compared with national midpoints, kitchen backsplash comes out highest (+3%) and kitchen remodel lowest (−2%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen remodel120 sq ft$18,100 – $30,800−2%
Storm door1 door$350 – $940−1%
Front door1 door$500 – $2,450−2%
Bathroom remodel45 sq ft$4,750 – $23,400+1%
Shower pan1 pan$950 – $2,800+1%
Kitchen backsplash30 sq ft$310 – $1,550+3%

Who does the work: Las Vegas trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Las Vegas the blend is 1.03.

Carpenters (47-2031), 80% of the weighting: a median of $29.99 an hour, in line with the US median of $29.12. The middle half of them earn between $24.25 and $39.81 an hour. About 9,310 work in the metro. That is 81.9 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.

For electricians (47-2111, weighted 10%) the local median is $34.08 an hour, which is 12% above the national $30.38. The middle half of them earn between $23.26 and $46.72 an hour. BLS counts 5,730 of them working in the area, 50.4 for every 10,000 jobs (US: 48.7), so the local bench is about average.

Plumbers, pipefitters and steamfitters (47-2152), 10% of the weighting: a median of $28.70 an hour, 6% below the US median of $30.67. The middle half of them earn between $22.78 and $42.13 an hour. About 3,800 work in the metro. That is 33.4 per 10,000 jobs, compared with 30.0 nationally, so the supply of crews looks typical.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,200 to the midpoint estimate; the 25th percentile takes off about $690. That is a swing of roughly 7.6% to 12.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Las Vegas-Henderson-North Las Vegas has 1,136,960 jobs in total (BLS, May 2025), ranking 26th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$24.25$29.99$39.81$29.121.03metro
Electricians (47-2111)10%$23.26$34.08$46.72$30.381.12metro
Plumbers, pipefitters and steamfitters (47-2152)10%$22.78$28.70$42.13$30.670.94metro
Blended100%1.03

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $7,150 to $11,100 for Las Vegas, NV is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Las Vegas, NV: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen cabinets in Las Vegas: your questions

+How much does it cost to replace kitchen cabinets in Las Vegas?

For 25 linear ft, expect $4,200 to $14,000 in the Las Vegas area. A standard-spec job lands at $7,150 to $11,100. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for kitchen cabinets in Las Vegas?

About $148 to $501 per linear ft for materials and labor, plus $500 to $1,500 for the permit if one is needed. The US range is $150 to $500.

+Is kitchen cabinets cheaper in Las Vegas or Lake Havasu City?

Lake Havasu City is 80 miles away. The midpoint for 25 linear ft there is $8,050, which is 12% less than Las Vegas ($9,100). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Las Vegas?

About 49% at the midpoint, or $4,500 out of $9,100. Materials are 40% and permits 11%. Nationally, labor is 48%.

+What would average kitchen (25 linear ft) cost in Las Vegas?

$4,200 to $14,000. Pick a different size in the estimator above to get your own number.

+Does kitchen cabinets need a permit in Las Vegas?

Often, but rules are set by your city or county building office, so call before you hire. Budget $500 to $1,500 for fees in the Las Vegas area (our national range of $500 to $1,500 scaled by the local price level).

+Is Las Vegas expensive for kitchen cabinets compared with the rest of Nevada?

Las Vegas is 0% below the Nevada statewide estimate ($9,150 at the midpoint). We cover 2 metros in Nevada; see the state page to compare them.

+What do carpenters earn in Las Vegas?

The BLS median is $29.99 an hour in the Las Vegas area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.25 to $39.81.

+What do basic and premium kitchen cabinets work cost in Las Vegas?

For 25 linear ft, basic work runs $4,200 to $8,150 and premium work $10,100 to $14,000. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.

Kitchen cabinets near Las Vegas

Kitchen cabinets: all pricesKitchen cabinets in NevadaAll projects in Las VegasNevada cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.