Skip to content
CostLocal

Kitchen cabinets cost in Nevada

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (25 linear ft)
$4,200 – $14,100
Per linear ft
$148 – $504
before permit
Versus US midpoint
Level
US $9,150
Metros covered
2

What does it cost to replace kitchen cabinets in Nevada? Plan on $4,200 to $14,100 for 25 linear ft. Wages (1.04x the US blend), materials (price index 96.3) and permit costs (100.0) put the state above the national midpoint by 0%.

Inside Nevada, the metros we cover range from $9,100 (Las Vegas) to $9,250 (Reno) at the midpoint.

Estimate your kitchen cabinets cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Semi-custom with upgraded finishes

Estimated cost for 25 linear ft in Nevada (statewide), standard level

$7,150 to $11,100

About $255 to $397 per linear ft before permits. Labor is about 50% of the bill.

Cost breakdown
PartLowHigh
Materials$3,150$4,100
Labor$3,250$5,850
Permits and fees$800$1,200
Total$7,150$11,100
Save and get a PDF report

Cost breakdown for 25 linear ft in Nevada

Part of the jobLowMidpointHighShare
Materials$2,400$3,600$4,80039%
Labor$1,300$4,550$7,80050%
Permits and fees$500$1,000$1,50011%
Total$4,200$9,150$14,100100%

Nevada versus the states around it

Nevada ranks 19 of 51 (the 50 states plus DC) for kitchen cabinets, where 1 is the most expensive. The costliest is Hawaii at $11,400 and the cheapest Arkansas at $7,800, both for 25 linear ft at the midpoint. Nevada sits at $9,150. The five states closest by workforce center are listed below.

States near Nevada, same project and size
StateDistanceRangeMidpointvs. here
California210 miles away$4,750 – $16,200$10,500+15%
Utah290 miles away$4,000 – $13,000$8,500−7%
Arizona340 miles away$4,100 – $13,500$8,800−4%
Idaho460 miles away$3,950 – $12,800$8,350−9%
New Mexico550 miles away$4,100 – $13,500$8,800−4%

Quality levels and sizes in Nevada

The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Nevada wages and prices. The grid prices the same bands at 4 common sizes.

Basic

$4,200 to $8,150

Stock cabinets, same layout

Standard

$7,150 to $11,100

Semi-custom with upgraded finishes

Premium

$10,100 to $14,100

Custom cabinetry, new layout

Cost by size and quality level
SizeBasicStandardPremium
small galley (15 linear ft)$2,700 – $5,250$4,600 – $7,150$6,500 – $9,050
10x10 kitchen (20 linear ft)$3,450 – $6,700$5,900 – $9,150$8,350 – $11,600
average kitchen (25 linear ft)$4,200 – $8,150$7,150 – $11,100$10,100 – $14,100
large kitchen (40 linear ft)$6,400 – $12,500$11,000 – $17,100$15,600 – $21,600

Kitchen cabinets: what moves the price in Nevada

  • Stock, semi-custom or custom

    Stock cabinets run $100-$400 per linear foot installed, semi-custom $150-$700, and custom $500-$1,200 (HomeGuide).

  • Layout changes

    Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.

  • Removal

    Taking out the old cabinets is $300-$600, though many installers fold it into their labor price.

  • Permit

    Kitchen remodeling permits are $500-$1,500 where one is needed, usually when you change layout, plumbing or wiring.

Wages behind the Nevada number

Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 3 trades drive the labor line for this job, and the weighted ratio against the national wage level is 1.04 for Nevada.

For carpenters (47-2031, weighted 80%) the local median is $29.99 an hour, which is in line with the national $29.12. The middle half of them earn between $24.25 and $39.13 an hour. BLS counts 12,700 of them working in the state, 81.9 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.

Electricians (47-2111), 10% of the weighting: a median of $35.37 an hour, 16% above the US median of $30.38. The middle half of them earn between $23.52 and $46.42 an hour. About 8,350 work in the state. That is 53.8 per 10,000 jobs, compared with 48.7 nationally, so the supply of crews looks typical.

For plumbers, pipefitters and steamfitters (47-2152, weighted 10%) the local median is $29.62 an hour, which is 3% below the national $30.67. The middle half of them earn between $23.34 and $43.05 an hour. BLS counts 5,370 of them working in the state, 34.6 for every 10,000 jobs (US: 30.0), so the local bench is deeper than average.

A crew paid at the 75th percentile for carpenters ($39.13 an hour) would add about $1,100 to the statewide midpoint; one at the 25th percentile ($24.25) would take off about $690. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 1,551,540 jobs across Nevada (May 2025), which is 1.0% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$24.25$29.99$39.13$29.121.03state
Electricians (47-2111)10%$23.52$35.37$46.42$30.381.16state
Plumbers, pipefitters and steamfitters (47-2152)10%$23.34$29.62$43.05$30.670.97state
Blended100%1.04

Nevada metro-by-metro prices

1 of the 2 metros sit above the statewide midpoint of $9,150, and the top-to-bottom gap is 2%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (25 linear ft)Midpointvs. state
Reno, NV$4,250 – $14,300$9,250+1%
Las Vegas, NV$4,200 – $14,000$9,100level

Related projects, priced for Nevada

The table prices neighboring jobs at their usual sizes using statewide Nevada wages and prices. Against national midpoints, kitchen backsplash comes out highest (+2%) and kitchen remodel lowest (−2%), because each job leans on different trades.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen remodel120 sq ft$18,100 – $30,900−2%
Storm door1 door$350 – $940−1%
Front door1 door$500 – $2,450−2%
Bathroom remodel45 sq ft$4,750 – $23,400+1%
Shower pan1 pan$950 – $2,800+1%
Kitchen backsplash30 sq ft$310 – $1,500+2%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $7,150 to $11,100 for Nevada is attached.

Take this estimate with you: PDF report, $9

Multi-page report for Nevada: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen cabinets in Nevada: your questions

+How much does it cost to replace kitchen cabinets in Nevada?

$4,200 to $14,100 for 25 linear ft, using statewide wages and prices. Metro areas inside Nevada can sit above or below that.

+Which city in Nevada is cheapest for kitchen cabinets?

Las Vegas at about $9,100 (midpoint, 25 linear ft). The priciest is Reno at $9,250.

+Is kitchen cabinets cheaper in Nevada than the US average?

It is 0% more expensive: $9,150 against $9,150 for 25 linear ft at the midpoint.

+What share of the price is labor in Nevada?

About 50% ($4,550). Materials are 39%. Statewide labor for this job is weighted 1.04x the national wage level.

+What do carpenters earn in Nevada?

The BLS statewide median is $29.99 an hour, against $29.12 for the US. The 25th to 75th percentile range is $24.25 to $39.13.

+Where does Nevada rank for kitchen cabinets costs?

19th most expensive of 51 (the 50 states plus DC) at the midpoint, $9,150 for 25 linear ft. Rank 1 is the costliest.

+What do basic and premium kitchen cabinets work cost in Nevada?

For 25 linear ft, basic work runs $4,200 to $8,150 and premium work $10,100 to $14,100. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.

Kitchen cabinets by city in Nevada

Kitchen cabinets: all pricesNevada cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.