Skip to content
CostLocal

Kitchen cabinets cost in Orlando, FL

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (25 linear ft)
$3,950 – $12,500
Per linear ft
$137 – $440
before permit
Versus US midpoint
−10%
US $9,150
Rank of 300 metros
#215
1 = most expensive

Local price for new kitchen cabinets in the Orlando area: $3,950 to $12,500 for 25 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 10% lower than the US figure. Carpenters earn a median of $23.92 an hour in the Orlando area, 18% below the US median of $29.12.

Estimate your kitchen cabinets cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Semi-custom with upgraded finishes

Estimated cost for 25 linear ft in Orlando, FL, standard level

$6,500 to $9,950

About $228 to $349 per linear ft before permits. Labor is about 44% of the bill.

Cost breakdown
PartLowHigh
Materials$3,150$4,100
Labor$2,600$4,650
Permits and fees$810$1,200
Total$6,500$9,950
Save and get a PDF report

Cost breakdown for 25 linear ft in Orlando, FL

Part of the jobLowMidpointHighShare
Materials$2,400$3,600$4,80044%
Labor$1,050$3,600$6,20044%
Permits and fees$510$1,000$1,50012%
Total$3,950$8,250$12,500100%

Where the Orlando price comes from

Labor is 44% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is carpenters (80%), electricians (10%), plumbers, pipefitters and steamfitters (10%). We weight each trade's local median wage by that share and compare it with the national median. In Orlando the blended ratio comes out at 0.82.

Materials are scaled with BEA's regional price parity for goods. Orlando is at 96.2 against 100 for the US, so a materials line of $3,750 nationally becomes $3,600 here (midpoint, 25 linear ft). Permits follow the all-items index of 101.4: $510 to $1,500.

Pick a size, pick a tier: kitchen cabinets pricing in Orlando

The cited range is split into basic, standard and premium bands, then scaled to Orlando. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small galley (15 linear ft) to large kitchen (40 linear ft).

Basic

$3,950 to $7,350

Stock cabinets, same layout

Standard

$6,500 to $9,950

Semi-custom with upgraded finishes

Premium

$9,100 to $12,500

Custom cabinetry, new layout

Cost by size and quality level
SizeBasicStandardPremium
small galley (15 linear ft)$2,550 – $4,800$4,250 – $6,450$5,900 – $8,100
10x10 kitchen (20 linear ft)$3,250 – $6,100$5,350 – $8,200$7,500 – $10,300
average kitchen (25 linear ft)$3,950 – $7,350$6,500 – $9,950$9,100 – $12,500
large kitchen (40 linear ft)$6,000 – $11,200$9,950 – $15,200$13,900 – $19,100

Kitchen cabinets: what moves the price in Orlando

  • Layout changes

    Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.

  • Removal

    Taking out the old cabinets is $300-$600, though many installers fold it into their labor price.

  • Permit

    Kitchen remodeling permits are $500-$1,500 where one is needed, usually when you change layout, plumbing or wiring.

Orlando against nearby metros and the rest of Florida

Same job, same size (25 linear ft), priced for the nearest metros. Orlando is the priciest of the group. Ocala is the cheapest at $7,950.

Comparison with nearby areas
AreaRangeMidpointvs. here
Orlando, FLthis page$3,950 – $12,500$8,250
Lakeland, FL40 miles$3,850 – $12,100$7,950−3%
Palm Bay, FL40 miles$3,950 – $12,400$8,200−1%
Deltona, FL50 miles$3,850 – $12,100$8,000−3%
Ocala, FL65 miles$3,850 – $12,000$7,950−4%
Sebastian, FL70 miles$3,900 – $12,400$8,150−1%
Florida (statewide)$4,000 – $12,700$8,350+1%
United States$4,250 – $14,000$9,150+11%

Out of the 300 metros we cover, Orlando ranks #215 for the cost of this job (#1 is the most expensive). Statewide, Orlando is 1% below the Florida figure.

Elsewhere in Florida

Florida metros compared with Orlando
MetroSizeRangeMidpointvs. here
Miami, FL2,819,940 jobs$4,250 – $13,400$8,800+7%
Tampa, FL1,447,120 jobs$3,950 – $12,700$8,350+2%
Jacksonville, FL765,930 jobs$3,950 – $12,700$8,350+1%
North Port, FL339,940 jobs$4,000 – $12,800$8,400+2%
Cape Coral, FL304,790 jobs$3,950 – $12,500$8,250level
Lakeland, FL265,280 jobs$3,850 – $12,100$7,950−3%

Metros of a similar size

Big cities and small ones price differently, so here is Orlando against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Tampa, FL1,447,120 jobs$3,950 – $12,700$8,350+2%
Charlotte, NC1,358,370 jobs$3,950 – $12,700$8,350+1%
San Diego, CA1,538,060 jobs$4,750 – $16,100$10,400+27%
Baltimore, MD1,356,680 jobs$4,350 – $14,400$9,400+14%

Planning more than one job in Orlando?

Jobs that often go together with kitchen cabinets are priced below at their usual sizes, using the same Orlando wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−6%) and bathroom remodel lowest (−10%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen remodel120 sq ft$17,300 – $29,600−6%
Storm door1 door$320 – $870−9%
Front door1 door$440 – $2,350−7%
Bathroom remodel45 sq ft$4,250 – $21,000−10%
Shower pan1 pan$820 – $2,600−9%
Kitchen backsplash30 sq ft$270 – $1,400−8%

Who does the work: Orlando trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Orlando the blend is 0.82.

Carpenters (47-2031), 80% of the weighting: a median of $23.92 an hour, 18% below the US median of $29.12. The middle half of them earn between $21.13 and $28.25 an hour. About 5,360 work in the metro. That is 38.0 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.

For electricians (47-2111, weighted 10%) the local median is $24.43 an hour, which is 20% below the national $30.38. The middle half of them earn between $22.75 and $28.78 an hour. BLS counts 6,970 of them working in the area, 49.4 for every 10,000 jobs (US: 48.7), so the local bench is about average.

Plumbers, pipefitters and steamfitters (47-2152), 10% of the weighting: a median of $26.62 an hour, 13% below the US median of $30.67. The middle half of them earn between $22.85 and $29.69 an hour. About 4,040 work in the metro. That is 28.6 per 10,000 jobs, compared with 30.0 nationally, so the supply of crews looks typical.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $520 to the midpoint estimate; the 25th percentile takes off about $340. That is a swing of roughly 4.1% to 6.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Orlando-Kissimmee-Sanford has 1,411,730 jobs in total (BLS, May 2025), ranking 20th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$21.13$23.92$28.25$29.120.82metro
Electricians (47-2111)10%$22.75$24.43$28.78$30.380.80metro
Plumbers, pipefitters and steamfitters (47-2152)10%$22.85$26.62$29.69$30.670.87metro
Blended100%0.82

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,500 to $9,950 for Orlando, FL is attached.

Take this estimate with you: PDF report, $9

The report lays out the kitchen cabinets numbers for Orlando, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen cabinets in Orlando: your questions

+How much does it cost to replace kitchen cabinets in Orlando?

For 25 linear ft, expect $3,950 to $12,500 in the Orlando area. A standard-spec job lands at $6,500 to $9,950. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for kitchen cabinets in Orlando?

About $137 to $440 per linear ft for materials and labor, plus $510 to $1,500 for the permit if one is needed. The US range is $150 to $500.

+Is kitchen cabinets cheaper in Orlando or Lakeland?

Lakeland is 40 miles away. The midpoint for 25 linear ft there is $7,950, which is 3% less than Orlando ($8,250). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Orlando?

About 44% at the midpoint, or $3,600 out of $8,250. Materials are 44% and permits 12%. Nationally, labor is 48%.

+What would average kitchen (25 linear ft) cost in Orlando?

$3,950 to $12,500. Pick a different size in the estimator above to get your own number.

+Does kitchen cabinets need a permit in Orlando?

Often, but rules are set by your city or county building office, so call before you hire. Budget $510 to $1,500 for fees in the Orlando area (our national range of $500 to $1,500 scaled by the local price level).

+Is Orlando expensive for kitchen cabinets compared with the rest of Florida?

Orlando is 1% below the Florida statewide estimate ($8,350 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.

+What do carpenters earn in Orlando?

The BLS median is $23.92 an hour in the Orlando area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.13 to $28.25.

+What do basic and premium kitchen cabinets work cost in Orlando?

For 25 linear ft, basic work runs $3,950 to $7,350 and premium work $9,100 to $12,500. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.

Kitchen cabinets near Orlando

Kitchen cabinets: all pricesKitchen cabinets in FloridaAll projects in OrlandoFlorida cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.