Skip to content
CostLocal

Attic insulation cost in Altoona, PA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1,000 sq ft)
$1,000 – $4,050
Per sq ft
$1 – $4.05
before permit
Versus US midpoint
+1%
US $2,500
Rank of 300 metros
#89
1 = most expensive

Attic insulation in Altoona, PA usually costs $1,000 to $4,050 for 1,000 sq ft. That works out to about $1 to $4.05 per sq ft before permits. That is within a few percent of the national midpoint, so there is little local premium or discount. Insulation workers, floor, ceiling and wall earn a median of $24.33 an hour in the Altoona area, 3% above the US median of $23.62.

Estimate your attic insulation cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Higher R-value with air sealing around fixtures

Estimated cost for 1,000 sq ft in Altoona, PA, standard level

$1,900 to $3,150

About $1.90 to $3.15 per sq ft before permits. Labor is about 36% of the bill.

Cost breakdown
PartLowHigh
Materials$1,150$2,050
Labor$750$1,100
Permits and fees$0$0
Total$1,900$3,150
Save and get a PDF report

Cost breakdown for 1,000 sq ft in Altoona, PA

Part of the jobLowMidpointHighShare
Materials$500$1,600$2,70064%
Labor$510$920$1,30036%
Permits and fees$0$0$00%
Total$1,000$2,550$4,050100%

Where the Altoona price comes from

The wage side of the estimate leans on insulation workers, floor, ceiling and wall, who do 80% of the hours on a typical job. Their local median is $24.33 an hour. Add the other trades involved and the blended wage index for Altoona is 1.02 (US = 1.00), which puts labor at 36% of the total. BLS does not publish this trade for the metro, so we used the Pennsylvania statewide median.

Materials are scaled with BEA's regional price parity for goods. Altoona is at 100.7 against 100 for the US, so a materials line of $1,600 nationally becomes $1,600 here (midpoint, 1,000 sq ft). Permits follow the all-items index of 89.5: $0 to $0.

Data note: 80% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Altoona. The wage table below marks each row.

Is Altoona cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1,000 sq ft range from $2,500 to $2,550 across Altoona and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Altoona, PAthis page$1,000 – $4,050$2,550
State College, PA35 miles$1,050 – $4,100$2,550+1%
Chambersburg, PA50 miles$1,000 – $4,050$2,550level
Harrisburg, PA65 miles$1,000 – $4,050$2,550+1%
Hagerstown, MD65 miles$1,050 – $4,050$2,550+1%
Pittsburgh, PA80 miles$990 – $4,000$2,500−1%
Pennsylvania (statewide)$1,000 – $4,050$2,500level
United States$1,000 – $4,000$2,500−1%

Out of the 300 metros we cover, Altoona ranks #89 for the cost of this job (#1 is the most expensive). Statewide, Altoona is 0% above the Pennsylvania figure.

Elsewhere in Pennsylvania

Pennsylvania metros compared with Altoona
MetroSizeRangeMidpointvs. here
Philadelphia, PA2,897,830 jobs$1,000 – $4,000$2,500−1%
Pittsburgh, PA1,114,490 jobs$990 – $4,000$2,500−1%
Allentown, PA377,180 jobs$950 – $3,850$2,400−5%
Harrisburg, PA335,010 jobs$1,000 – $4,050$2,550+1%
Scranton, PA255,620 jobs$1,000 – $4,050$2,550level
Lancaster, PA252,230 jobs$990 – $3,950$2,500−2%

Metros of a similar size

Big cities and small ones price differently, so here is Altoona against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Kingston, NY59,140 jobs$1,100 – $4,200$2,650+5%
Dubuque, IA58,470 jobs$1,050 – $4,000$2,500−1%
Niles, MI59,970 jobs$950 – $3,750$2,350−7%
Albany, GA58,390 jobs$950 – $3,800$2,400−6%

Related projects, priced for Altoona

Jobs that often go together with attic insulation are priced below at their usual sizes, using the same Altoona wage and price inputs. Compared with national midpoints, window replacement comes out highest (level) and roof replacement lowest (−11%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$5,350 – $11,300−11%
Metal roof2,000 sq ft of roof$8,950 – $30,100−8%
Vinyl siding2,100 sq ft of wall$8,250 – $24,700−2%
Window replacement10 windows$4,500 – $15,000level
Gutters160 linear ft$1,250 – $4,050−3%

Altoona: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Altoona. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small attic (600 sq ft) to large attic (1,800 sq ft).

Basic

$1,000 to $2,200

Blown-in fiberglass or cellulose to code R-value

Standard

$1,900 to $3,150

Higher R-value with air sealing around fixtures

Premium

$2,850 to $4,050

Spray foam or heavy air sealing, hard-to-reach attic

Cost by size and quality level
SizeBasicStandardPremium
small attic (600 sq ft)$610 – $1,350$1,150 – $1,900$1,700 – $2,450
average attic (1,000 sq ft)$1,000 – $2,200$1,900 – $3,150$2,850 – $4,050
large attic (1,800 sq ft)$1,800 – $4,000$3,450 – $5,650$5,100 – $7,300

What local crews earn in Altoona

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Altoona the blend is 1.02.

Insulation workers, floor, ceiling and wall (47-2131) carry 80% of the labor weighting. BLS does not publish this trade for the Altoona metro, so we used the Pennsylvania statewide median: $24.33 an hour against $23.62 for the US. The middle half of them earn between $21.40 and $29.49 an hour.

For construction laborers (47-2061, weighted 20%) the local median is $22.03 an hour, which is in line with the national $22.66. The middle half of them earn between $18.45 and $24.02 an hour. BLS counts 350 of them working in the area, 59.7 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

A quick sensitivity check: moving the lead trade (insulation workers, floor, ceiling and wall) from the median to the 75th percentile wage adds about $160 to the midpoint estimate; the 25th percentile takes off about $90. That is a swing of roughly 3.5% to 6.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Altoona has 58,650 jobs in total (BLS, May 2025), ranking 291st by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Insulation workers, floor, ceiling and wall (47-2131)80%$21.40$24.33$29.49$23.621.03state
Construction laborers (47-2061)20%$18.45$22.03$24.02$22.660.97metro
Blended100%1.02

Attic insulation: what moves the price in Altoona

  • Air sealing and fixture damming

    Sealing gaps and damming around recessed lights are part of what moves the price within a type.

  • Removing old insulation

    Old, wet or pest-damaged insulation has to come out first, at extra cost.

  • Type of insulation

    Blown-in is $0.90-$2.40 per sq ft and loose-fill is $1.00-$2.50 installed; spray foam costs more (HomeGuide).

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,900 to $3,150 for Altoona, PA is attached.

Take this estimate with you: PDF report, $9

The report lays out the attic insulation numbers for Altoona, PA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Attic insulation in Altoona: your questions

+How much does it cost to insulate an attic in Altoona?

For 1,000 sq ft, expect $1,000 to $4,050 in the Altoona area. A standard-spec job lands at $1,900 to $3,150. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for attic insulation in Altoona?

About $1 to $4.05 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $1 to $4.

+Is attic insulation cheaper in Altoona or State College?

State College is 35 miles away. The midpoint for 1,000 sq ft there is $2,550, which is 1% more than Altoona ($2,550). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Altoona?

About 36% at the midpoint, or $920 out of $2,550. Materials are 64% and permits 0%. Nationally, labor is 36%.

+What would average attic (1,000 sq ft) cost in Altoona?

$1,000 to $4,050. Pick a different size in the estimator above to get your own number.

+Does attic insulation need a permit in Altoona?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Altoona area (our national range of $0 to $0 scaled by the local price level).

+Is Altoona expensive for attic insulation compared with the rest of Pennsylvania?

Altoona is 0% above the Pennsylvania statewide estimate ($2,500 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.

+What do insulation workers, floor, ceiling and wall earn in Altoona?

BLS has no published metro figure here, so we use the statewide median of $24.33 an hour, compared with $23.62 nationally. The 25th to 75th percentile range is $21.40 to $29.49.

+What do basic and premium attic insulation work cost in Altoona?

For 1,000 sq ft, basic work runs $1,000 to $2,200 and premium work $2,850 to $4,050. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.

Attic insulation near Altoona

Attic insulation: all pricesAttic insulation in PennsylvaniaAll projects in AltoonaPennsylvania cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.