Skip to content
CostLocal

Attic insulation cost in Albany, GA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1,000 sq ft)
$950 – $3,800
Per sq ft
$0.95 – $3.80
before permit
Versus US midpoint
−5%
US $2,500
Rank of 300 metros
#213
1 = most expensive

Attic insulation in Albany, GA usually costs $950 to $3,800 for 1,000 sq ft. That works out to about $0.95 to $3.80 per sq ft before permits. Compared with the national midpoint that is $120 less. Insulation workers, floor, ceiling and wall earn a median of $22.99 an hour in the Albany area, 3% below the US median of $23.62.

Estimate your attic insulation cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Higher R-value with air sealing around fixtures

Estimated cost for 1,000 sq ft in Albany, GA, standard level

$1,800 to $2,950

About $1.80 to $2.95 per sq ft before permits. Labor is about 35% of the bill.

Cost breakdown
PartLowHigh
Materials$1,100$1,950
Labor$690$990
Permits and fees$0$0
Total$1,800$2,950
Save and get a PDF report

Cost breakdown for 1,000 sq ft in Albany, GA

Part of the jobLowMidpointHighShare
Materials$480$1,550$2,60065%
Labor$470$840$1,20035%
Permits and fees$0$0$00%
Total$950$2,400$3,800100%

Why Albany prices look the way they do

We price the labor side from BLS wage data for 2 trades: insulation workers, floor, ceiling and wall at 80%, construction laborers at 20%. Weighted together, Albany wages are 0.93 times the national level. Labor makes up about 35% of the midpoint estimate (36% at national prices). BLS does not publish this trade for the metro, so we used the Georgia statewide median.

Materials are scaled with BEA's regional price parity for goods. Albany is at 96.3 against 100 for the US, so a materials line of $1,600 nationally becomes $1,550 here (midpoint, 1,000 sq ft). Permits follow the all-items index of 87.7: $0 to $0.

Data note: 80% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Albany. The wage table below marks each row.

How Albany compares

Of the five closest metros, none is cheaper than Albany. Tallahassee comes closest at about $2,400.

Comparison with nearby areas
AreaRangeMidpointvs. here
Albany, GAthis page$950 – $3,800$2,400
Warner Robins, GA65 miles$950 – $3,850$2,400+1%
Columbus, GA70 miles$950 – $3,800$2,400level
Dothan, AL85 miles$950 – $3,800$2,400level
Macon, GA85 miles$960 – $3,850$2,400+1%
Tallahassee, FL90 miles$950 – $3,800$2,400level
Georgia (statewide)$970 – $3,900$2,450+2%
United States$1,000 – $4,000$2,500+5%

Out of the 300 metros we cover, Albany ranks #213 for the cost of this job (#1 is the most expensive). Statewide, Albany is 2% below the Georgia figure.

Elsewhere in Georgia

Georgia metros compared with Albany
MetroSizeRangeMidpointvs. here
Atlanta, GA2,889,670 jobs$1,050 – $4,100$2,550+8%
Augusta, GA231,930 jobs$950 – $3,850$2,400level
Savannah, GA198,360 jobs$920 – $3,750$2,350−2%
Columbus, GA116,380 jobs$950 – $3,800$2,400level
Gainesville, GA103,870 jobs$950 – $3,800$2,400level
Athens, GA95,800 jobs$950 – $3,800$2,400level

Metros of a similar size

Big cities and small ones price differently, so here is Albany against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Dubuque, IA58,470 jobs$1,050 – $4,000$2,500+5%
Wheeling, WV58,130 jobs$870 – $3,600$2,250−6%
Altoona, PA58,650 jobs$1,000 – $4,050$2,550+6%
Sebastian, FL57,620 jobs$960 – $3,850$2,400+1%

Specs and site conditions that change a Albany bid

  • Job size

    Small attics start around $500 and large ones go up to $6,000 (HomeGuide).

  • Air sealing and fixture damming

    Sealing gaps and damming around recessed lights are part of what moves the price within a type.

  • Removing old insulation

    Old, wet or pest-damaged insulation has to come out first, at extra cost.

What local crews earn in Albany

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Albany the blend is 0.93.

Insulation workers, floor, ceiling and wall (47-2131) carry 80% of the labor weighting. BLS does not publish this trade for the Albany metro, so we used the Georgia statewide median: $22.99 an hour against $23.62 for the US. The middle half of them earn between $18.43 and $30.35 an hour.

For construction laborers (47-2061, weighted 20%) the local median is $17.25 an hour, which is 24% below the national $22.66. The middle half of them earn between $14.62 and $18.96 an hour. BLS counts 400 of them working in the area, 68.5 for every 10,000 jobs (US: 70.5), so the local bench is about average.

A quick sensitivity check: moving the lead trade (insulation workers, floor, ceiling and wall) from the median to the 75th percentile wage adds about $220 to the midpoint estimate; the 25th percentile takes off about $140. That is a swing of roughly 5.8% to 9.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Albany has 58,390 jobs in total (BLS, May 2025), ranking 293rd by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Insulation workers, floor, ceiling and wall (47-2131)80%$18.43$22.99$30.35$23.620.97state
Construction laborers (47-2061)20%$14.62$17.25$18.96$22.660.76metro
Blended100%0.93

Albany: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Albany. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small attic (600 sq ft) to large attic (1,800 sq ft).

Basic

$950 to $2,100

Blown-in fiberglass or cellulose to code R-value

Standard

$1,800 to $2,950

Higher R-value with air sealing around fixtures

Premium

$2,650 to $3,800

Spray foam or heavy air sealing, hard-to-reach attic

Cost by size and quality level
SizeBasicStandardPremium
small attic (600 sq ft)$570 – $1,250$1,100 – $1,750$1,600 – $2,300
average attic (1,000 sq ft)$950 – $2,100$1,800 – $2,950$2,650 – $3,800
large attic (1,800 sq ft)$1,700 – $3,750$3,250 – $5,300$4,800 – $6,850

What nearby projects cost in Albany

Jobs that often go together with attic insulation are priced below at their usual sizes, using the same Albany wage and price inputs. Compared with national midpoints, window replacement comes out highest (−10%) and vinyl siding lowest (−18%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$5,300 – $11,100−12%
Metal roof2,000 sq ft of roof$8,450 – $28,600−13%
Vinyl siding2,100 sq ft of wall$6,850 – $20,600−18%
Window replacement10 windows$3,950 – $13,500−10%
Gutters160 linear ft$1,100 – $3,700−13%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,800 to $2,950 for Albany, GA is attached.

Detailed attic insulation report for Albany, GA, $9

The report lays out the attic insulation numbers for Albany, GA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Attic insulation in Albany: your questions

+How much does it cost to insulate an attic in Albany?

For 1,000 sq ft, expect $950 to $3,800 in the Albany area. A standard-spec job lands at $1,800 to $2,950. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for attic insulation in Albany?

About $0.95 to $3.80 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $1 to $4.

+Is attic insulation cheaper in Albany or Warner Robins?

Warner Robins is 65 miles away. The midpoint for 1,000 sq ft there is $2,400, which is 1% more than Albany ($2,400). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Albany?

About 35% at the midpoint, or $840 out of $2,400. Materials are 65% and permits 0%. Nationally, labor is 36%.

+What would average attic (1,000 sq ft) cost in Albany?

$950 to $3,800. Pick a different size in the estimator above to get your own number.

+Does attic insulation need a permit in Albany?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Albany area (our national range of $0 to $0 scaled by the local price level).

+Is Albany expensive for attic insulation compared with the rest of Georgia?

Albany is 2% below the Georgia statewide estimate ($2,450 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.

+What do insulation workers, floor, ceiling and wall earn in Albany?

BLS has no published metro figure here, so we use the statewide median of $22.99 an hour, compared with $23.62 nationally. The 25th to 75th percentile range is $18.43 to $30.35.

+What do basic and premium attic insulation work cost in Albany?

For 1,000 sq ft, basic work runs $950 to $2,100 and premium work $2,650 to $3,800. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.

Attic insulation near Albany

Attic insulation: all pricesAttic insulation in GeorgiaAll projects in AlbanyGeorgia cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.