Attic insulation cost in Maryland
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (1,000 sq ft)
- $1,100 – $4,250
- Per sq ft
- $1.10 – $4.25
- before permit
- Versus US midpoint
- +7%
- US $2,500
- Metros covered
- 3
Maryland prices for attic insulation: $1,100 to $4,250 for 1,000 sq ft, or $1.10 to $4.25 per sq ft without the permit. The state midpoint is 7% above the national one. Local wages for insulation workers, floor, ceiling and wall are $28.09 an hour.
Inside Maryland, the metros we cover range from $2,550 (Hagerstown) to $2,750 (Baltimore) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your attic insulation cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1,000 sq ft in Maryland (statewide), standard level
$2,050 to $3,300
About $2.05 to $3.30 per sq ft before permits. Labor is about 39% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,200 | $2,100 |
| Labor | $850 | $1,200 |
| Permits and fees | $0 | $0 |
| Total | $2,050 | $3,300 |
Cost breakdown for 1,000 sq ft in Maryland
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $510 | $1,650 | $2,750 | 61% |
| Labor | $580 | $1,050 | $1,500 | 39% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $1,100 | $2,700 | $4,250 | 100% |
Other Maryland jobs that often go with attic insulation
Each project weights the trades differently, so Maryland's wage level does not push every price by the same amount. Compared with the US midpoint, roof replacement is +5% and vinyl siding +2%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,450 – $13,100 | +5% |
| Metal roof | 2,000 sq ft of roof | $10,700 – $33,900 | +5% |
| Vinyl siding | 2,100 sq ft of wall | $8,600 – $25,800 | +2% |
| Window replacement | 10 windows | $4,650 – $15,400 | +3% |
| Gutters | 160 linear ft | $1,300 – $4,300 | +3% |
Maryland against its neighbors
Maryland ranks 8 of 51 (the 50 states plus DC) for attic insulation, where 1 is the most expensive. The costliest is Washington at $2,900 and the cheapest West Virginia at $2,250, both for 1,000 sq ft at the midpoint. Maryland sits at $2,700. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| District of Columbia | 50 miles away | $1,050 – $4,200 | $2,600 | −2% |
| Delaware | 60 miles away | $1,000 – $4,000 | $2,500 | −7% |
| Pennsylvania | 70 miles away | $1,000 – $4,050 | $2,500 | −6% |
| New Jersey | 110 miles away | $1,100 – $4,350 | $2,750 | +2% |
| Virginia | 150 miles away | $960 – $3,900 | $2,450 | −9% |
Why two Maryland quotes can differ
Type of insulation
Blown-in is $0.90-$2.40 per sq ft and loose-fill is $1.00-$2.50 installed; spray foam costs more (HomeGuide).
Job size
Small attics start around $500 and large ones go up to $6,000 (HomeGuide).
Air sealing and fixture damming
Sealing gaps and damming around recessed lights are part of what moves the price within a type.
Removing old insulation
Old, wet or pest-damaged insulation has to come out first, at extra cost.
Maryland labor market for attic insulation
Maryland's labor line is priced from 2 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 1.15 times the national level.
For insulation workers, floor, ceiling and wall (47-2131, weighted 80%) the local median is $28.09 an hour, which is 19% above the national $23.62. The middle half of them earn between $22.33 and $32.72 an hour. BLS counts 1,240 of them working in the state, 4.5 for every 10,000 jobs (US: 2.9), so the local bench is deeper than average.
For construction laborers (47-2061, weighted 20%) the local median is $22.58 an hour, which is in line with the national $22.66. The middle half of them earn between $18.98 and $26.70 an hour. BLS counts 20,920 of them working in the state, 75.7 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A crew paid at the 75th percentile for insulation workers, floor, ceiling and wall ($32.72 an hour) would add about $140 to the statewide midpoint; one at the 25th percentile ($22.33) would take off about $180. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 2,763,030 jobs across Maryland (May 2025), which is 1.8% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Insulation workers, floor, ceiling and wall (47-2131) | 80% | $22.33 | $28.09 | $32.72 | $23.62 | 1.19 | state |
| Construction laborers (47-2061) | 20% | $18.98 | $22.58 | $26.70 | $22.66 | 1.00 | state |
| Blended | 100% | 1.15 | |||||
Basic, standard or premium: Maryland prices
Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from small attic (600 sq ft) to large attic (1,800 sq ft).
Basic
$1,100 to $2,350
Blown-in fiberglass or cellulose to code R-value
Standard
$2,050 to $3,300
Higher R-value with air sealing around fixtures
Premium
$3,000 to $4,250
Spray foam or heavy air sealing, hard-to-reach attic
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small attic (600 sq ft) | $650 – $1,400 | $1,200 – $2,000 | $1,800 – $2,550 |
| average attic (1,000 sq ft) | $1,100 – $2,350 | $2,050 – $3,300 | $3,000 – $4,250 |
| large attic (1,800 sq ft) | $1,950 – $4,250 | $3,650 – $5,950 | $5,400 – $7,700 |
Which Maryland city is cheapest for attic insulation?
1 of the 3 metros sit above the statewide midpoint of $2,700, and the top-to-bottom gap is 8%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (1,000 sq ft) | Midpoint | vs. state |
|---|---|---|---|
| Baltimore, MD | $1,150 – $4,350 | $2,750 | +2% |
| Lexington Park, MD | $1,050 – $4,200 | $2,600 | −2% |
| Hagerstown, MD | $1,050 – $4,050 | $2,550 | −5% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,050 to $3,300 for Maryland is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Maryland: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Attic insulation in Maryland: your questions
+How much does it cost to insulate an attic in Maryland?
$1,100 to $4,250 for 1,000 sq ft, using statewide wages and prices. Metro areas inside Maryland can sit above or below that.
+Which city in Maryland is cheapest for attic insulation?
Hagerstown at about $2,550 (midpoint, 1,000 sq ft). The priciest is Baltimore at $2,750.
+Is attic insulation cheaper in Maryland than the US average?
It is 7% more expensive: $2,700 against $2,500 for 1,000 sq ft at the midpoint.
+What share of the price is labor in Maryland?
About 39% ($1,050). Materials are 61%. Statewide labor for this job is weighted 1.15x the national wage level.
+What do insulation workers, floor, ceiling and wall earn in Maryland?
The BLS statewide median is $28.09 an hour, against $23.62 for the US. The 25th to 75th percentile range is $22.33 to $32.72.
+Where does Maryland rank for attic insulation costs?
8th most expensive of 51 (the 50 states plus DC) at the midpoint, $2,700 for 1,000 sq ft. Rank 1 is the costliest.
+What do basic and premium attic insulation work cost in Maryland?
For 1,000 sq ft, basic work runs $1,100 to $2,350 and premium work $3,000 to $4,250. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.
Attic insulation by city in Maryland
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Attic Insulation Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.