Skip to content
CostLocal

Attic insulation cost in North Port, FL

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1,000 sq ft)
$960 – $3,850
Per sq ft
$0.95 – $3.85
before permit
Versus US midpoint
−4%
US $2,500
Rank of 300 metros
#173
1 = most expensive

Local price for attic insulation in the North Port area: $960 to $3,850 for 1,000 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 4% lower than the US figure. Building materials run about 4% below the US average here (BEA goods price index 96.2).

Estimate your attic insulation cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Higher R-value with air sealing around fixtures

Estimated cost for 1,000 sq ft in North Port, FL, standard level

$1,850 to $3,000

About $1.85 to $3 per sq ft before permits. Labor is about 36% of the bill.

Cost breakdown
PartLowHigh
Materials$1,100$1,950
Labor$710$1,000
Permits and fees$0$0
Total$1,850$3,000
Save and get a PDF report

Cost breakdown for 1,000 sq ft in North Port, FL

Part of the jobLowMidpointHighShare
Materials$480$1,550$2,60064%
Labor$480$860$1,25036%
Permits and fees$0$0$00%
Total$960$2,400$3,850100%

What is behind the North Port number

We price the labor side from BLS wage data for 2 trades: insulation workers, floor, ceiling and wall at 80%, construction laborers at 20%. Weighted together, North Port wages are 0.96 times the national level. Labor makes up about 36% of the midpoint estimate (36% at national prices). BLS does not publish this trade for the metro, so we used the Florida statewide median.

Materials are scaled with BEA's regional price parity for goods. North Port is at 96.2 against 100 for the US, so a materials line of $1,600 nationally becomes $1,550 here (midpoint, 1,000 sq ft). Permits follow the all-items index of 102.4: $0 to $0.

Data note: 80% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in North Port. The wage table below marks each row.

Who does the work: North Port trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For North Port the blend is 0.96.

Insulation workers, floor, ceiling and wall (47-2131) carry 80% of the labor weighting. BLS does not publish this trade for the North Port metro, so we used the Florida statewide median: $22.65 an hour against $23.62 for the US. The middle half of them earn between $18.57 and $28.00 an hour.

For construction laborers (47-2061, weighted 20%) the local median is $21.82 an hour, which is 4% below the national $22.66. The middle half of them earn between $18.18 and $23.55 an hour. BLS counts 4,260 of them working in the area, 125.3 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.

A quick sensitivity check: moving the lead trade (insulation workers, floor, ceiling and wall) from the median to the 75th percentile wage adds about $160 to the midpoint estimate; the 25th percentile takes off about $120. That is a swing of roughly 5.2% to 6.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

North Port-Bradenton-Sarasota has 339,940 jobs in total (BLS, May 2025), ranking 75th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Insulation workers, floor, ceiling and wall (47-2131)80%$18.57$22.65$28.00$23.620.96state
Construction laborers (47-2061)20%$18.18$21.82$23.55$22.660.96metro
Blended100%0.96

Related projects, priced for North Port

Jobs that often go together with attic insulation are priced below at their usual sizes, using the same North Port wage and price inputs. Compared with national midpoints, window replacement comes out highest (−7%) and metal roof lowest (−9%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$5,550 – $11,600−8%
Metal roof2,000 sq ft of roof$9,050 – $29,900−9%
Vinyl siding2,100 sq ft of wall$7,750 – $23,300−8%
Window replacement10 windows$4,150 – $14,000−7%
Gutters160 linear ft$1,150 – $3,900−7%

North Port against nearby metros and the rest of Florida

Of the five closest metros, 4 are cheaper than North Port. Lakeland is the lowest at about $2,400 (midpoint, 1,000 sq ft), 60 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
North Port, FLthis page$960 – $3,850$2,400
Punta Gorda, FL40 miles$960 – $3,850$2,400level
Tampa, FL55 miles$950 – $3,800$2,400−1%
Cape Coral, FL60 miles$960 – $3,850$2,400level
Lakeland, FL60 miles$950 – $3,800$2,400−1%
Orlando, FL100 miles$950 – $3,800$2,400−1%
Florida (statewide)$970 – $3,900$2,450+1%
United States$1,000 – $4,000$2,500+4%

Out of the 300 metros we cover, North Port ranks #173 for the cost of this job (#1 is the most expensive). Statewide, North Port is 1% below the Florida figure.

Elsewhere in Florida

Florida metros compared with North Port
MetroSizeRangeMidpointvs. here
Miami, FL2,819,940 jobs$1,000 – $4,050$2,550+6%
Tampa, FL1,447,120 jobs$950 – $3,800$2,400−1%
Orlando, FL1,411,730 jobs$950 – $3,800$2,400−1%
Jacksonville, FL765,930 jobs$950 – $3,850$2,400−1%
Cape Coral, FL304,790 jobs$960 – $3,850$2,400level
Lakeland, FL265,280 jobs$950 – $3,800$2,400−1%

Metros of a similar size

Big cities and small ones price differently, so here is North Port against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Durham, NC344,020 jobs$930 – $3,800$2,350−2%
El Paso, TX339,120 jobs$940 – $3,750$2,350−2%
Worcester, MA349,880 jobs$1,000 – $4,000$2,500+4%
Bakersfield, CA338,230 jobs$1,050 – $4,200$2,600+9%

Attic insulation: what moves the price in North Port

  • Job size

    Small attics start around $500 and large ones go up to $6,000 (HomeGuide).

  • Air sealing and fixture damming

    Sealing gaps and damming around recessed lights are part of what moves the price within a type.

  • Removing old insulation

    Old, wet or pest-damaged insulation has to come out first, at extra cost.

Cost by quality level and size in North Port

The cited range is split into basic, standard and premium bands, then scaled to North Port. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small attic (600 sq ft) to large attic (1,800 sq ft).

Basic

$960 to $2,100

Blown-in fiberglass or cellulose to code R-value

Standard

$1,850 to $3,000

Higher R-value with air sealing around fixtures

Premium

$2,700 to $3,850

Spray foam or heavy air sealing, hard-to-reach attic

Cost by size and quality level
SizeBasicStandardPremium
small attic (600 sq ft)$580 – $1,250$1,100 – $1,800$1,600 – $2,300
average attic (1,000 sq ft)$960 – $2,100$1,850 – $3,000$2,700 – $3,850
large attic (1,800 sq ft)$1,750 – $3,800$3,300 – $5,350$4,850 – $6,900

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,850 to $3,000 for North Port, FL is attached.

A detailed PDF report of this estimate, $9

Multi-page report for North Port, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Attic insulation in North Port: your questions

+How much does it cost to insulate an attic in North Port?

For 1,000 sq ft, expect $960 to $3,850 in the North Port area. A standard-spec job lands at $1,850 to $3,000. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for attic insulation in North Port?

About $0.95 to $3.85 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $1 to $4.

+Is attic insulation cheaper in North Port or Punta Gorda?

Punta Gorda is 40 miles away. The midpoint for 1,000 sq ft there is $2,400, which is 0% more than North Port ($2,400). Wage and materials indexes both feed that gap.

+How much of the bill is labor in North Port?

About 36% at the midpoint, or $860 out of $2,400. Materials are 64% and permits 0%. Nationally, labor is 36%.

+What would average attic (1,000 sq ft) cost in North Port?

$960 to $3,850. Pick a different size in the estimator above to get your own number.

+Does attic insulation need a permit in North Port?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the North Port area (our national range of $0 to $0 scaled by the local price level).

+Is North Port expensive for attic insulation compared with the rest of Florida?

North Port is 1% below the Florida statewide estimate ($2,450 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.

+What do insulation workers, floor, ceiling and wall earn in North Port?

BLS has no published metro figure here, so we use the statewide median of $22.65 an hour, compared with $23.62 nationally. The 25th to 75th percentile range is $18.57 to $28.00.

+What do basic and premium attic insulation work cost in North Port?

For 1,000 sq ft, basic work runs $960 to $2,100 and premium work $2,700 to $3,850. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.

Attic insulation near North Port

Attic insulation: all pricesAttic insulation in FloridaAll projects in North PortFlorida cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.