Hardwood flooring cost in Bremerton, WA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (500 sq ft)
- $5,800 – $13,100
- Per sq ft
- $11.50 – $26.50
- before permit
- Versus US midpoint
- +5%
- US $9,000
- Rank of 300 metros
- #44
- 1 = most expensive
Local price for a hardwood floor in the Bremerton area: $5,800 to $13,100 for 500 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 5% higher than the US figure. Building materials run about 5% above the US average here (BEA goods price index 105.0).
Estimate your hardwood flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 500 sq ft in Bremerton, WA, standard level
$8,000 to $10,900
About $16 to $22 per sq ft before permits. Labor is about 42% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,550 | $6,450 |
| Labor | $3,400 | $4,500 |
| Permits and fees | $0 | $0 |
| Total | $8,000 | $10,900 |
Cost breakdown for 500 sq ft in Bremerton, WA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,150 | $5,500 | $7,900 | 58% |
| Labor | $2,650 | $3,950 | $5,250 | 42% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $5,800 | $9,450 | $13,100 | 100% |
Why Bremerton prices look the way they do
The wage side of the estimate leans on carpenters, who do 70% of the hours on a typical job. Their local median is $31.25 an hour. Add the other trades involved and the blended wage index for Bremerton is 1.05 (US = 1.00), which puts labor at 42% of the total.
Materials are scaled with BEA's regional price parity for goods. Bremerton is at 105.0 against 100 for the US, so a materials line of $5,250 nationally becomes $5,500 here (midpoint, 500 sq ft). Permits follow the all-items index of 105.6: $0 to $0.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Bremerton. The wage table below marks each row.
Who does the work: Bremerton trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Bremerton the blend is 1.05.
Carpenters (47-2031), 70% of the weighting: a median of $31.25 an hour, 7% above the US median of $29.12. The middle half of them earn between $28.92 and $42.18 an hour. About 940 work in the metro. That is 100.3 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
Floor layers (except carpet, wood and hard tiles) (47-2042) carry 30% of the labor weighting. BLS does not publish this trade for the Bremerton metro, so we used the Washington statewide median: $27.31 an hour against $27.15 for the US. The middle half of them earn between $24.11 and $35.90 an hour.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $990 to the midpoint estimate; the 25th percentile takes off about $210. That is a swing of roughly 2.2% to 10.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Bremerton-Silverdale-Port Orchard has 93,740 jobs in total (BLS, May 2025), ranking 216th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 70% | $28.92 | $31.25 | $42.18 | $29.12 | 1.07 | metro |
| Floor layers (except carpet, wood and hard tiles) (47-2042) | 30% | $24.11 | $27.31 | $35.90 | $27.15 | 1.01 | state |
| Blended | 100% | 1.05 | |||||
Specs and site conditions that change a Bremerton bid
Permit
Flooring rarely needs a permit, so no permit fee is included in this estimate.
Solid versus engineered
Solid hardwood is $11-$25 per sq ft installed and engineered hardwood is $9-$20 (HomeGuide).
Materials and labor
Materials are $6-$15 per sq ft and installation labor adds $3-$10 per sq ft.
Cost by quality level and size in Bremerton
The cited range is split into basic, standard and premium bands, then scaled to Bremerton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one room (200 sq ft) to whole house (1,200 sq ft).
Basic
$5,800 to $8,750
Standard solid oak, simple layout
Standard
$8,000 to $10,900
Wider planks or a better grade, some stairs
Premium
$10,200 to $13,100
Exotic species, herringbone or complex layout
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one room (200 sq ft) | $2,300 – $3,500 | $3,200 – $4,350 | $4,100 – $5,250 |
| main floor (500 sq ft) | $5,800 – $8,750 | $8,000 – $10,900 | $10,200 – $13,100 |
| whole house (1,200 sq ft) | $13,900 – $20,900 | $19,200 – $26,200 | $24,500 – $31,500 |
What nearby projects cost in Bremerton
Jobs that often go together with hardwood floor are priced below at their usual sizes, using the same Bremerton wage and price inputs. Compared with national midpoints, tile flooring comes out highest (+24%) and laminate flooring lowest (+4%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Laminate flooring | 500 sq ft | $2,050 – $7,300 | +4% |
| Tile flooring | 200 sq ft | $3,500 – $11,900 | +24% |
| Kitchen remodel | 120 sq ft | $20,000 – $34,000 | +8% |
| Bathroom remodel | 45 sq ft | $5,550 – $27,600 | +19% |
Is Bremerton cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 500 sq ft range from $9,400 to $9,900 across Bremerton and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Bremerton, WAthis page | $5,800 – $13,100 | $9,450 | |
| Seattle, WA40 miles | $6,100 – $13,700 | $9,900 | +5% |
| Olympia, WA50 miles | $5,750 – $13,000 | $9,400 | −1% |
| Bellingham, WA90 miles | $6,000 – $13,600 | $9,800 | +4% |
| Yakima, WA120 miles | $5,750 – $13,000 | $9,400 | −1% |
| Portland, OR140 miles | $6,050 – $13,700 | $9,900 | +5% |
| Washington (statewide) | $6,050 – $13,600 | $9,850 | +4% |
| United States | $5,500 – $12,500 | $9,000 | −5% |
Out of the 300 metros we cover, Bremerton ranks #44 for the cost of this job (#1 is the most expensive). Statewide, Bremerton is 4% below the Washington figure.
Elsewhere in Washington
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Seattle, WA | 2,086,210 jobs | $6,100 – $13,700 | $9,900 | +5% |
| Spokane, WA | 255,820 jobs | $5,700 – $13,000 | $9,350 | −1% |
| Olympia, WA | 130,300 jobs | $5,750 – $13,000 | $9,400 | −1% |
| Kennewick, WA | 129,490 jobs | $5,750 – $13,100 | $9,450 | level |
| Yakima, WA | 97,010 jobs | $5,750 – $13,000 | $9,400 | −1% |
| Bellingham, WA | 91,390 jobs | $6,000 – $13,600 | $9,800 | +4% |
Metros of a similar size
Big cities and small ones price differently, so here is Bremerton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Oshkosh, WI | 93,750 jobs | $5,950 – $13,300 | $9,650 | +2% |
| Bellingham, WA | 91,390 jobs | $6,000 – $13,600 | $9,800 | +4% |
| Iowa City, IA | 93,760 jobs | $5,000 – $11,400 | $8,150 | −14% |
| Panama City, FL | 90,610 jobs | $5,100 – $11,600 | $8,350 | −12% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $8,000 to $10,900 for Bremerton, WA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Bremerton, WA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Hardwood flooring in Bremerton: your questions
+How much does it cost to install hardwood flooring in Bremerton?
For 500 sq ft, expect $5,800 to $13,100 in the Bremerton area. A standard-spec job lands at $8,000 to $10,900. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for hardwood floor in Bremerton?
About $11.50 to $26.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $11 to $25.
+Is hardwood floor cheaper in Bremerton or Seattle?
Seattle is 40 miles away. The midpoint for 500 sq ft there is $9,900, which is 5% more than Bremerton ($9,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Bremerton?
About 42% at the midpoint, or $3,950 out of $9,450. Materials are 58% and permits 0%. Nationally, labor is 42%.
+What would main floor (500 sq ft) cost in Bremerton?
$5,800 to $13,100. Pick a different size in the estimator above to get your own number.
+Does hardwood floor need a permit in Bremerton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Bremerton area (our national range of $0 to $0 scaled by the local price level).
+Is Bremerton expensive for hardwood floor compared with the rest of Washington?
Bremerton is 4% below the Washington statewide estimate ($9,850 at the midpoint). We cover 7 metros in Washington; see the state page to compare them.
+What do carpenters earn in Bremerton?
The BLS median is $31.25 an hour in the Bremerton area, compared with $29.12 nationally. The 25th to 75th percentile range is $28.92 to $42.18.
+What do basic and premium hardwood floor work cost in Bremerton?
For 500 sq ft, basic work runs $5,800 to $8,750 and premium work $10,200 to $13,100. Basic means: standard solid oak, simple layout. Premium means: exotic species, herringbone or complex layout.
Hardwood flooring near Bremerton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.