Hardwood flooring cost in Eugene, OR
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (500 sq ft)
- $5,700 – $13,000
- Per sq ft
- $11.50 – $26
- before permit
- Versus US midpoint
- +4%
- US $9,000
- Rank of 300 metros
- #49
- 1 = most expensive
Local price for a hardwood floor in the Eugene area: $5,700 to $13,000 for 500 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 4% higher than the US figure. Building materials run about 5% above the US average here (BEA goods price index 105.3).
Estimate your hardwood flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 500 sq ft in Eugene, OR, standard level
$7,900 to $10,800
About $16 to $21.50 per sq ft before permits. Labor is about 41% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,600 | $6,450 |
| Labor | $3,350 | $4,350 |
| Permits and fees | $0 | $0 |
| Total | $7,900 | $10,800 |
Cost breakdown for 500 sq ft in Eugene, OR
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,150 | $5,550 | $7,900 | 59% |
| Labor | $2,550 | $3,850 | $5,100 | 41% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $5,700 | $9,350 | $13,000 | 100% |
Why Eugene prices look the way they do
The wage side of the estimate leans on carpenters, who do 70% of the hours on a typical job. Their local median is $30.09 an hour. Add the other trades involved and the blended wage index for Eugene is 1.02 (US = 1.00), which puts labor at 41% of the total.
Materials are scaled with BEA's regional price parity for goods. Eugene is at 105.3 against 100 for the US, so a materials line of $5,250 nationally becomes $5,550 here (midpoint, 500 sq ft). Permits follow the all-items index of 101.6: $0 to $0.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Eugene. The wage table below marks each row.
Eugene: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Eugene. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one room (200 sq ft) to whole house (1,200 sq ft).
Basic
$5,700 to $8,650
Standard solid oak, simple layout
Standard
$7,900 to $10,800
Wider planks or a better grade, some stairs
Premium
$10,100 to $13,000
Exotic species, herringbone or complex layout
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one room (200 sq ft) | $2,300 – $3,450 | $3,150 – $4,350 | $4,050 – $5,200 |
| main floor (500 sq ft) | $5,700 – $8,650 | $7,900 – $10,800 | $10,100 – $13,000 |
| whole house (1,200 sq ft) | $13,700 – $20,700 | $19,000 – $26,000 | $24,200 – $31,200 |
Who does the work: Eugene trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Eugene the blend is 1.02.
Carpenters (47-2031), 70% of the weighting: a median of $30.09 an hour, 3% above the US median of $29.12. The middle half of them earn between $24.10 and $35.05 an hour. About 710 work in the metro. That is 45.0 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
Floor layers (except carpet, wood and hard tiles) (47-2042) carry 30% of the labor weighting. BLS does not publish this trade for the Eugene metro, so we used the Oregon statewide median: $27.14 an hour against $27.15 for the US. The middle half of them earn between $23.11 and $31.18 an hour.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $450 to the midpoint estimate; the 25th percentile takes off about $540. That is a swing of roughly 5.8% to 4.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Eugene-Springfield has 157,710 jobs in total (BLS, May 2025), ranking 150th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 70% | $24.10 | $30.09 | $35.05 | $29.12 | 1.03 | metro |
| Floor layers (except carpet, wood and hard tiles) (47-2042) | 30% | $23.11 | $27.14 | $31.18 | $27.15 | 1.00 | state |
| Blended | 100% | 1.02 | |||||
Hardwood flooring: what moves the price in Eugene
Layout
Room shape, stairs and installation method change the labor side.
Permit
Flooring rarely needs a permit, so no permit fee is included in this estimate.
Solid versus engineered
Solid hardwood is $11-$25 per sq ft installed and engineered hardwood is $9-$20 (HomeGuide).
Planning more than one job in Eugene?
Jobs that often go together with hardwood floor are priced below at their usual sizes, using the same Eugene wage and price inputs. Compared with national midpoints, bathroom remodel comes out highest (+11%) and laminate flooring lowest (+3%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Laminate flooring | 500 sq ft | $2,050 – $7,200 | +3% |
| Tile flooring | 200 sq ft | $2,550 – $10,600 | +6% |
| Kitchen remodel | 120 sq ft | $19,800 – $33,700 | +7% |
| Bathroom remodel | 45 sq ft | $5,200 – $25,800 | +11% |
How Eugene compares
Of the five closest metros, 3 are cheaper than Eugene. Medford is the lowest at about $9,150 (midpoint, 500 sq ft), 105 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Eugene, ORthis page | $5,700 – $13,000 | $9,350 | |
| Salem, OR65 miles | $5,650 – $12,900 | $9,250 | −1% |
| Bend, OR100 miles | $5,700 – $13,000 | $9,300 | level |
| Medford, OR105 miles | $5,600 – $12,700 | $9,150 | −2% |
| Portland, OR115 miles | $6,050 – $13,700 | $9,900 | +6% |
| Yakima, WA205 miles | $5,750 – $13,000 | $9,400 | level |
| Oregon (statewide) | $5,700 – $13,000 | $9,400 | level |
| United States | $5,500 – $12,500 | $9,000 | −4% |
Out of the 300 metros we cover, Eugene ranks #49 for the cost of this job (#1 is the most expensive). Statewide, Eugene is 0% below the Oregon figure.
Elsewhere in Oregon
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Portland, OR | 1,208,410 jobs | $6,050 – $13,700 | $9,900 | +6% |
| Salem, OR | 188,620 jobs | $5,650 – $12,900 | $9,250 | −1% |
| Bend, OR | 108,240 jobs | $5,700 – $13,000 | $9,300 | level |
| Medford, OR | 89,060 jobs | $5,600 – $12,700 | $9,150 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Eugene against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Gulfport, MS | 158,310 jobs | $4,950 – $11,400 | $8,200 | −13% |
| Brownsville, TX | 157,450 jobs | $4,400 – $10,200 | $7,300 | −22% |
| Youngstown, OH | 160,160 jobs | $5,250 – $11,900 | $8,550 | −8% |
| Hickory, NC | 154,090 jobs | $5,000 – $11,400 | $8,200 | −12% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $7,900 to $10,800 for Eugene, OR is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Eugene, OR: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Hardwood flooring in Eugene: your questions
+How much does it cost to install hardwood flooring in Eugene?
For 500 sq ft, expect $5,700 to $13,000 in the Eugene area. A standard-spec job lands at $7,900 to $10,800. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for hardwood floor in Eugene?
About $11.50 to $26 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $11 to $25.
+Is hardwood floor cheaper in Eugene or Salem?
Salem is 65 miles away. The midpoint for 500 sq ft there is $9,250, which is 1% less than Eugene ($9,350). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Eugene?
About 41% at the midpoint, or $3,850 out of $9,350. Materials are 59% and permits 0%. Nationally, labor is 42%.
+What would main floor (500 sq ft) cost in Eugene?
$5,700 to $13,000. Pick a different size in the estimator above to get your own number.
+Does hardwood floor need a permit in Eugene?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Eugene area (our national range of $0 to $0 scaled by the local price level).
+Is Eugene expensive for hardwood floor compared with the rest of Oregon?
Eugene is 0% below the Oregon statewide estimate ($9,400 at the midpoint). We cover 5 metros in Oregon; see the state page to compare them.
+What do carpenters earn in Eugene?
The BLS median is $30.09 an hour in the Eugene area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.10 to $35.05.
+What do basic and premium hardwood floor work cost in Eugene?
For 500 sq ft, basic work runs $5,700 to $8,650 and premium work $10,100 to $13,000. Basic means: standard solid oak, simple layout. Premium means: exotic species, herringbone or complex layout.
Hardwood flooring near Eugene
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.