Hardwood flooring cost in Bend, OR
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (500 sq ft)
- $5,700 – $13,000
- Per sq ft
- $11.50 – $26
- before permit
- Versus US midpoint
- +4%
- US $9,000
- Rank of 300 metros
- #51
- 1 = most expensive
Local price for a hardwood floor in the Bend area: $5,700 to $13,000 for 500 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 4% higher than the US figure. Building materials run about 5% above the US average here (BEA goods price index 105.3).
Estimate your hardwood flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 500 sq ft in Bend, OR, standard level
$7,850 to $10,800
About $15.50 to $21.50 per sq ft before permits. Labor is about 41% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,600 | $6,450 |
| Labor | $3,300 | $4,300 |
| Permits and fees | $0 | $0 |
| Total | $7,850 | $10,800 |
Cost breakdown for 500 sq ft in Bend, OR
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,150 | $5,550 | $7,900 | 59% |
| Labor | $2,550 | $3,800 | $5,050 | 41% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $5,700 | $9,300 | $13,000 | 100% |
Why Bend prices look the way they do
The wage side of the estimate leans on carpenters, who do 70% of the hours on a typical job. Their local median is $29.64 an hour. Add the other trades involved and the blended wage index for Bend is 1.01 (US = 1.00), which puts labor at 41% of the total.
Materials are scaled with BEA's regional price parity for goods. Bend is at 105.3 against 100 for the US, so a materials line of $5,250 nationally becomes $5,550 here (midpoint, 500 sq ft). Permits follow the all-items index of 103.6: $0 to $0.
Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Bend. The wage table below marks each row.
Is Bend cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 500 sq ft range from $9,150 to $9,900 across Bend and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Bend, ORthis page | $5,700 – $13,000 | $9,300 | |
| Eugene, OR100 miles | $5,700 – $13,000 | $9,350 | level |
| Salem, OR110 miles | $5,650 – $12,900 | $9,250 | −1% |
| Portland, OR125 miles | $6,050 – $13,700 | $9,900 | +6% |
| Medford, OR150 miles | $5,600 – $12,700 | $9,150 | −2% |
| Yakima, WA160 miles | $5,750 – $13,000 | $9,400 | +1% |
| Oregon (statewide) | $5,700 – $13,000 | $9,400 | +1% |
| United States | $5,500 – $12,500 | $9,000 | −3% |
Out of the 300 metros we cover, Bend ranks #51 for the cost of this job (#1 is the most expensive). Statewide, Bend is 1% below the Oregon figure.
Elsewhere in Oregon
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Portland, OR | 1,208,410 jobs | $6,050 – $13,700 | $9,900 | +6% |
| Salem, OR | 188,620 jobs | $5,650 – $12,900 | $9,250 | −1% |
| Eugene, OR | 157,710 jobs | $5,700 – $13,000 | $9,350 | level |
| Medford, OR | 89,060 jobs | $5,600 – $12,700 | $9,150 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Bend against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Tuscaloosa, AL | 108,460 jobs | $4,800 – $11,100 | $7,950 | −15% |
| Columbia, MO | 107,680 jobs | $5,150 – $11,800 | $8,450 | −9% |
| Laredo, TX | 109,370 jobs | $4,600 – $10,600 | $7,600 | −19% |
| Hagerstown, MD | 107,170 jobs | $5,150 – $11,800 | $8,450 | −9% |
Why two Bend quotes can differ
Layout
Room shape, stairs and installation method change the labor side.
Permit
Flooring rarely needs a permit, so no permit fee is included in this estimate.
Solid versus engineered
Solid hardwood is $11-$25 per sq ft installed and engineered hardwood is $9-$20 (HomeGuide).
Cost by quality level and size in Bend
The cited range is split into basic, standard and premium bands, then scaled to Bend. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one room (200 sq ft) to whole house (1,200 sq ft).
Basic
$5,700 to $8,600
Standard solid oak, simple layout
Standard
$7,850 to $10,800
Wider planks or a better grade, some stairs
Premium
$10,000 to $13,000
Exotic species, herringbone or complex layout
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one room (200 sq ft) | $2,300 – $3,450 | $3,150 – $4,300 | $4,000 – $5,200 |
| main floor (500 sq ft) | $5,700 – $8,600 | $7,850 – $10,800 | $10,000 – $13,000 |
| whole house (1,200 sq ft) | $13,700 – $20,600 | $18,900 – $25,900 | $24,100 – $31,100 |
What nearby projects cost in Bend
Jobs that often go together with hardwood floor are priced below at their usual sizes, using the same Bend wage and price inputs. Compared with national midpoints, bathroom remodel comes out highest (+10%) and tile flooring lowest (level); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Laminate flooring | 500 sq ft | $2,050 – $7,200 | +2% |
| Tile flooring | 200 sq ft | $2,250 – $10,100 | level |
| Kitchen remodel | 120 sq ft | $19,900 – $33,800 | +7% |
| Bathroom remodel | 45 sq ft | $5,200 – $25,700 | +10% |
Who does the work: Bend trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Bend the blend is 1.01.
Carpenters (47-2031), 70% of the weighting: a median of $29.64 an hour, in line with the US median of $29.12. The middle half of them earn between $23.71 and $35.99 an hour. About 1,180 work in the metro. That is 109.0 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
Floor layers (except carpet, wood and hard tiles) (47-2042) carry 30% of the labor weighting. BLS does not publish this trade for the Bend metro, so we used the Oregon statewide median: $27.14 an hour against $27.15 for the US. The middle half of them earn between $23.11 and $31.18 an hour.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $570 to the midpoint estimate; the 25th percentile takes off about $530. That is a swing of roughly 5.7% to 6.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Bend has 108,240 jobs in total (BLS, May 2025), ranking 193rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 70% | $23.71 | $29.64 | $35.99 | $29.12 | 1.02 | metro |
| Floor layers (except carpet, wood and hard tiles) (47-2042) | 30% | $23.11 | $27.14 | $31.18 | $27.15 | 1.00 | state |
| Blended | 100% | 1.01 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $7,850 to $10,800 for Bend, OR is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Bend, OR: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Hardwood flooring in Bend: your questions
+How much does it cost to install hardwood flooring in Bend?
For 500 sq ft, expect $5,700 to $13,000 in the Bend area. A standard-spec job lands at $7,850 to $10,800. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for hardwood floor in Bend?
About $11.50 to $26 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $11 to $25.
+Is hardwood floor cheaper in Bend or Eugene?
Eugene is 100 miles away. The midpoint for 500 sq ft there is $9,350, which is 0% more than Bend ($9,300). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Bend?
About 41% at the midpoint, or $3,800 out of $9,300. Materials are 59% and permits 0%. Nationally, labor is 42%.
+What would main floor (500 sq ft) cost in Bend?
$5,700 to $13,000. Pick a different size in the estimator above to get your own number.
+Does hardwood floor need a permit in Bend?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Bend area (our national range of $0 to $0 scaled by the local price level).
+Is Bend expensive for hardwood floor compared with the rest of Oregon?
Bend is 1% below the Oregon statewide estimate ($9,400 at the midpoint). We cover 5 metros in Oregon; see the state page to compare them.
+What do carpenters earn in Bend?
The BLS median is $29.64 an hour in the Bend area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.71 to $35.99.
+What do basic and premium hardwood floor work cost in Bend?
For 500 sq ft, basic work runs $5,700 to $8,600 and premium work $10,000 to $13,000. Basic means: standard solid oak, simple layout. Premium means: exotic species, herringbone or complex layout.
Hardwood flooring near Bend
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.